Textural,structural and catalytic behavior of low specific area silica-supported copper catalysts: effect of preparation method

Supported copper catalysts on low surface area silica were prepared by several methods and characterized by AAS, XRD, N₂ adsorption, SEM, H₂-TPR, N₂O titration, TGA-DTA, UV–Vis techniques. Their hydrogenating properties were examined in the gas-phase hydrogenation of benzaldehyde. The analysis of characterization results revealed that the choice of preparation method affected the texture, composition, and structure of the calcined and reduced Cu/SiO₂ catalysts. The dispersion and size distribution of copper species was present in different forms in the catalysts that exhibited low specific surface areas. In gas-phase hydrogenation of benzaldehyde to benzyl alcohol, the catalysts tested at the reaction temperatures of 160 and 200 °C were stable and conducted to a good catalytic activity and benzyl alcohol selectivity ranging between 5 and 39 µmol min^?1 g^?1 and 0–95%, respectively. The activity of the catalysts in gas-phase hydrogenation also depended on the particle size and the nature of copper species formed on low surface area silica.     

Substituted γ-lactones. Some observations on the synthesis and reactivity of 4-aroyl-3-hydroxy-2(5H)-furanones

The reaction pathway towards formation of 4-aroyl-3-hydroxy-2(5H)-furanones 1 from the base catalyzed reaction between an acetophenone, diethyl oxalate and formaldehyde was investigated. If methoxide was used as base, a transesterification was found to occur in the first step, while a side reaction, namely the retro Claisen reaction, was in competition with the desired lactone formation in the second step. The nature of the solvent and the acidic character of 1 as well as the basicity of the aminoarylene were found to have a profound influence on the course of the reaction of 1 with aminoarylenes.     

Determination of Sumatriptan and Zolmitriptan in Presence of Their Corresponding Degradation Products by HPTLC Methods

Accurate, sensitive, and precise high performance thin layer chromatographic (HPTLC) methods were developed and validated for the determination of sumatriptan and zolmitriptan in presence of their degradation products. Sumatriptan was separated from its degradation products and analyzed on TLC silica gel 60 F₂₅₄ plates using chloroform–ethyl acetate–methanol–ammonia (4:3:3:0.1, v/v) as a developing system followed by densitometric measurement of the bands at 228 nm. Zolmitriptan was determined using chloroform–ethyl acetate–methanol–ammonia (3:3:3:1, v/v) as a developing system followed by densitometric measurement at 222 nm. The methods were validated over a range of 0.5–4 μg/spot for sumatriptan and 0.5–3 μg/spot for zolmitriptan. The proposed methods were successfully applied for the determination of the studied drugs in bulk powder and in their pharmaceutical formulations.     

Enhancement of selectivity and resolution in the enantioseparation of uncharged compounds using mixtures of oppositely charged cyclodextrins in capillary electrophoresis

The enantiomeric separation of some nonsteroidal anti-inflammatory drugs (NSAIDs) was investigated in capillary electrophoresis (CE) using dual systems with mixtures of charged cyclodextrin (CD) derivatives. A significant enhancement of selectivity and resolution could be achieved in the enantioseparation of these analytes in their uncharged form by the simultaneous addition of two oppositely charged CD derivatives to the background electrolyte. The combination of the single-isomer cationic CD, permethyl-6-monoamino-6-monodeoxy-beta-CD (PMMAbetaCD) and the single-isomer polyanionic CD, heptakis-6-sulfato-beta-cyclodextrin (HSbetaCD) in a pH 2.5 phosphoric acid-triethanolamine buffer, was designed and employed for the enantioseparation of profens. The improvement in selectivity and resolution can be attributed to the fact that the two CDs, which lead to independent and enantioselective complexation with the analyte enantiomers, have not only opposite effects on the electrophoretic mobility of these compounds but also opposite affinity patterns towards the enantiomers of these compounds. Binding constants for these enantiomers with each CD were determined using linear regression approach, in order to be able to predict the effect of the concentrations of the two CDs on enantiomeric selectivity and resolution in such dual systems.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

Synthesis,Crystal Structure,and Characterization of a New Adduct 3-Ammoniumphenyl Sulfone Dihydrogenphosphate Phosphoric Acid [C12H14N2SO2](H2PO4)2H3PO4

Abstract

A new adduct 3-ammoniumphenyl sulfone dihydrogenphosphate phosphoric acid, [C₁₂H₁₄N₂O₂S](H₂PO₄)₂H₃PO₄, has been synthesized by slow evaporation at room temperature using 3-aminophenyl sulfone as the structure-directing agent. The structure, determined by single-crystal X-ray diffraction at 293 K, can be described as inorganic layers built by H₂PO₄ ^? groups and H₃PO₄ molecules, parallel to the (a, c) planes at y = 0.5, between which molecules of the organic group [C₁₂H₁₄N₂O₂S]²⁺ are inserted. In this atomic arrangement, hydrogen bonds and van der Waals interactions between the different species play an important role in the tri-dimensional network cohesion. Solid-state ¹³C and ³¹P MAS NMR spectroscopies are in agreement with the X-ray structure.

[Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental resource: Tables S1 and S2. Figures S1 and S2.]

GRAPHICAL ABSTRACT      

Mild Dehydration Using Trichlorotrifluoroacetone

The reaction of 1,1,1-trichloro-3,3,3-trifluoroacetone with 1[ddot] and 2[ddot] alcohols form the corresponding hemiketals which spontaneously eliminate water in presence of a catalytic amount of p-toluenesulfonic acid to produce the olefins in high yield.     

Indirect atomic absorption and atomic emission spectrometric determination of antazoline,hydralazine and amiloride hydrochlorides and quinine sulphate

Ion-association complexes of antazoline HCl [I], hydralazine HCl [II], amiloride HCl [III] and quinine sulphate [IV] with [Co(SCN)₄]^2– and [Co(NO₂)₆]^3– were precipitated and the excess unreacted cobalt complex was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drugs in pure solutions and pharmaceutical preparations is given. The drugs can be determined in the ranges 0.3–3.0, 0.19–1.96, 0.3–3.0, and 0.78–7.82 mg/25 ml solutions of I, II, III, and IV, respectively, with mean relative standard deviations of 0.65–2.03 % and recovery values of 95.76–101.2% indicating high precision and accuracy.     

Substituent Effect on the Electronic Structure of Sulfines: Molecular Orbital Treatment

The electronic structure and ground state properties of the gaseous sulfine H₂CSO and some of its derivatives were studied at the RHF, MP2, and B3LYP levels. The calculations showed that the Z-isomer is more stable than the E-one and their difference in energy depends on their level of calculation, basis set, and substituent. The factors affecting the isomer stability are the electrostatic interactions, the steric factor, and π-electrons delocalization. The substituent has little effect on the geometry of the CSO moiety but greatly affects its charge distribution and polarizability. The ΔE value of the E- to Z-isomerization process via rotation of the S═O bond was calculated. The substituent has an appreciable effect on both the geometry and energy barrier of isomerization depending on its electronegativity, electrostatic attraction, and effect on π-delocalization over the molecule.