Analysis of Soil by Magnetic Field Assisted Calibration-Free Laser Induced Breakdown Spectroscopy (CF-LIBS) and Laser Ablation – Time-of-Flight Mass Spectrometry (LA-TOF-MS)

The qualitative and quantitative analysis of soil samples collected from Sialkot, Pakistan (which contains leather industrial plants), has been performed using laser-induced breakdown spectroscopy (LIBS) and laser ablation time of flight mass spectrometry (LA-TOF-MS). The focused beam of a Q-switched Nd: YAG laser (532?nm) was used to ablate the soil samples in air at atmospheric pressure. The optical emission spectra demonstrate the presence of the spectral lines of Si, Fe, Al, Ca, Ti, K, Cr, Mg, Na, Ba, and Li in all of the samples. The emission lines intensities, electron number densities, and excitation temperatures were significantly enhanced in the presence of an external 0.3 T magnetic field applied perpendicular to the plasma plume. A maximum enhancement factor of approximately 8 was observed in the emission intensity. The emergence of several additional lines has also been detected using the magnetic field-assisted LIBS approach. The elemental composition determined using calibration-free laser-induced breakdown spectroscopy (CF-LIBS), with and without magnetic field, reveals that the external magnetic field only adjusts the laser-generated plasma dynamics without affecting the quantitative analysis of the samples. Importantly, the toxic and heavy elements such as chromium and barium were detected and quantified in all of the soil samples by both of these techniques. The variations in the compositional analysis using CF-LIBS with and without the applied magnetic field and LA-TOF-MS were less than 10%.     

Long-Term Potentiodynamic Testing and Tribometric Properties of Amorphous Alloy Coatings under Saline Environment

Protective coatings for harsh environments are always welcome, but they must overcome profound challenges, including corrosion and wear resistance. The purpose of this study is to look into the long-term potentiodynamic polarization measurements and dry tribometric behavior of plasma-sprayed amorphous coatings on AISI 1035 mild steel. To investigate the impact of unique active polarization potentials on the electrochemical studies of the iron-based amorphous layer, which compares favorably to AISI 1035 mild steel, the active potential polarization curve and friction coefficient tests were performed. Scanning electron microscopy (SEM) and energy dispersive x-ray (EDX) analyses were used to investigate the coating’s corrosion behavior. Their mechanical (Tribometric tests at higher sliding speeds) and chemical properties (electrochemical potentiodynamic polarization investigations) have also been thoroughly investigated. There is enough validation that these protective coatings can be used in hostile environments. The effects of long-term corrosion for 24 and 48 h were thoroughly examined. Tribometric examinations revealed that amorphous layers are highly resistant under dry conditions, as they offered a very low and stable friction coefficient less than 4 μ with micro Vickers hardness 1140 ± 22.14 HV, which is more than twice as compared to mild steel AISI 1035. The corrosion resistance of coatings in 3.5 wt % NaCl solution displays active transition characteristics of activation, passivation, over passivation, and pitting, as shown by the potentiodynamic polarization curves.     

Gold-Catalyzed Formal [4+2] Cycloaddition as Access to Antitumor-Active Spirocyclic Oxindoles from Alkynes and Isatin-Derived Ketimines

Due to its excellent bioactivity profile, which is increasingly utilized in pharmaceutical and synthetic chemistry, spirooxindole is an important core scaffold. We herein describe an efficient method for the construction of highly functionalized new spirooxindolocarbamates via a gold-catalyzed cycloaddition reaction of terminal alkynes or ynamides with isatin-derived ketimines. This protocol has a good functional group compatibility, uses readily available starting materials, mild reaction conditions, low catalyst loadings and no additives. It enables the transformation of various functionalized alkyne groups into cyclic carbamates. Gram-scale synthesis was achieved and DFT calculations verify the feasibility of the mechanistic proposal. Some of the target products exhibit good to excellent antiproliferative activity on human tumor cell lines. In addition, one of the most active compounds displayed a remarkable selectivity towards tumor cells over normal ones.     

Ultrasonic assisted improved extraction and dyeing of mordanted silk fabric using neem bark as source of natural colourant

Natural products with therapeutic nature are nowadays warmly welcomed in textiles. Current study is concerned with isolation of tannin from neem bark (Azadirachta indica) and its application onto silk fabric. For improvement in shades, chemical & bio-mordants have been employed at optimal dyeing conditions. It is found that methanolic extract of pH 5 obtained 8 g dye powder after US Treatment for 30 min has given high color strength if used to dye irradiated silk for 65 min at 75 °C. Bio-mordanting using herbal plants has improved the color characteristics as compared to chemical mordants used. ISO standards for color fastness reveal that herbal based bio-mordants have improved the rating from good to excellent as compared to chemical mordants used. It is concluded that US treatment has not only isolate the colorant for neem bark under mild condition but also given excellent characteristic using bio mordants onto silk fabrics.     

$$\varvec{}$$-Polar Fuzzy Labeling Graphs with Application

In this article, we apply the concept of m-polar fuzzy sets in labeling graphs and introduce the concept of m-polar fuzzy labeling graphs. We present properties of m-polar fuzzy labeling cycle and m-polar fuzzy labeling with bridge and cut nodes. We introduce several different types of distances, including w-distance, strongest strong distance, strong geodesic distance, \(\delta \)-distance in m-polar fuzzy labeling graph and investigate some of their properties. We also present an application of m-polar fuzzy labeling graphs in image processing.     

AFM substantiation of the fracture behavior and mechanical properties of sol–gel derived silica packed epoxy networks

Silica packed epoxy networks are prepared in two steps via in situ, solvent free sol–gel processing of tetraethoxysilane in liquid epoxy monomer and curing the mixture with a flexible diamine afterwards. The influence of filler content and processing conditions on the mechanical properties and the fracture behavior is studied by means of the static mechanical analysis and AFM characterization of the pristine and the fractured polymer surfaces, and a mechanism to enhance polymer strength and toughness is proposed. The in–situ evolution and packing of silica nanostructures into epoxy networks influences the overall morphology and performance of polymers under high stress. It is found that smaller silica domains distributed at the molecular level cause efficient crack distribution by absorbing energy and thus improve the strength and toughness of silica packed epoxy polymers.     

Synthesis of composite TiN/Ni3N/a-Si3N4 thin films using the plasma focus device

Composite films of TiN/Ni₃N/a-Si₃N₄ were synthesized using the Mather-type plasma focus device with varying numbers of focus deposition shots (5, 15, and 25) at 0° and 10° angular positions. The composition and structural analysis of these films were analyzed by using Rutherford backscattering (RBS) and X-ray diffraction (XRD). Scanning electron microscope and atomic force microscope were used to study the surface morphology of films. XRD patterns confirm the formation of composite TiN/Ni₃N/a-Si₃N₄ films. The crystallite size of TiN (200) plane is 11 and 22 nm, respectively, at 0° and 10° angular positions for same 25 focus deposition shots. Impurity levels and thickness were measured using RBS. Scanning electron microscopy results show the formation of net-like structures for multiple focus shots (5, 15, and 25) at angular positions of 0° and 10°. The average surface roughness of the deposited films increases with increasing focus shots. The roughness of the film decreases at higher angle 10° and the films obtained are smoother as compared with the films deposited at 0° angular positions.     

Numerical solutions of Schrödinger wave equation and Transport equation through Sinc collocation method

Nonlinear Dynamics - This paper focuses on finding soliton solutions for an intrinsic fractional discrete nonlinear electrical transmission lattice. Our investigation is based on the fact that for...