The analysis of the electrical properties of BLT ceramics fabricated from sol-gel derived powders

The (Ba_xLa_1?x)Ti_1?x/4O₃ (BLT,0.001 ≤ x ≤ 0.005) amorphous gel was prepared by sol-gel process. The electricalproperties of obtained materials has been investigated by impedance spectroscopy. Detailedanalysis of impedance spectra allowed to propose an adequate equivalent circuit, whichdescribed the electric properties of discussed materials very well. Basing on the obtainedcircuits and the fitting procedure the grain and grain boundary resistivity was determinedas a function of temperature and La concentration. With increase of La admixture thecontribution of grain and grains impedance to the bulk impedance changes. It was foundthat the small amount of La additive decreases the blocking factor of the grain boundaryin the temperature range 600–850 K, whereas the amount of La on the level of 0.4–0.5 mol.%causes the sharp increase of the mentioned factor. The fact may be attributed to adecrease of grain activation energy and increase of the grain boundary one.     

Characterization of globular protein solutions by dynamic light scattering, electrophoretic mobility, and viscosity measurements

In this work, physicochemical properties of two globular proteinsbovine serum albumin (BSA) having a molecular weight of 67 kDa and human serum albumin (HSA) having a molecular weight of 69 kDawere characterized. The bulk characteristics of these proteins involved the diffusion coefficient (hydrodynamic radius), electrophoretic mobility, and dynamic viscosity as a function of protein solution concentration for various pH values. The hydrodynamic radius data suggested an association of protein molecules, most probably forming compact dimers. Using the hydrodynamic diameter and the electropheretic mobility data allowed the determination of the number of uncompensated (electrokinetic) charges on protein surfaces. The electrophoretic mobility data were converted to zeta potential values, which allowed one to determine the isoelectric point (iep) of these proteins. It was found to be at pH 5.1 for both proteins, in accordance with previous experimental data and theoretical estimations derived from amino acid composition and p K values. To determine further the stability of protein solutions, dynamic viscosity measurements were carried out as a function of their bulk volume concentration for various pH values. The intrinsic viscosity derived from these measurements was interpreted in terms of the Brenner model, which is applicable to hard spheroidal particles. It was found that the experimental values of the intrinsic viscosity of these proteins were in good agreement with this model when assuming protein dimensions of 9.5 x 5 x 5 nm3 (prolate spheroid). The possibility of forming linear aggregates of association degree higher than 2 was excluded by these measurements. It was concluded that the combination of dynamic viscosity and dynamic light scattering can be exploited as a convenient tool for detecting not only the onset of protein aggregation in suspensions but also the form and composition of these aggregates.     

Multiple-timescale photoreactivity of a model compound related to the active site of [FeFe]-hydrogenase

Ultraviolet (UV) photolysis of (mu-S(CH 2) 3S)Fe 2(CO) 6 ( 1), a model compound of the Fe-hydrogenase enzyme system, has been carried out. When ultrafast UV-pump infrared (IR)-probe spectroscopy, steady-state Fourier transform IR spectroscopic methods, and density functional theory simulations are employed, it has been determined that irradiation of 1 in an alkane solution at 350 nm leads to the formation of two isomers of the 16-electron complex (mu-S(CH 2) 3S)Fe 2(CO) 5 within 50 ps with evidence of a weakly associated solvent adduct complex. 1 is subsequently recovered on timescales covering several minutes. These studies constitute the first attempt to study the photochemistry and reactivity of these enzyme active site models in solution following carbonyl ligand photolysis.     

Fibrinogen conformations and charge in electrolyte solutions derived from DLS and dynamic viscosity measurements

Hydrodynamic properties of fibrinogen molecules were theoretically calculated. Their shape was approximated by the bead model, considering the presence of flexible side chains of various length and orientation relative to the main body of the molecule. Using the bead model, and the precise many-multipole method of solving the Stokes equations, the mobility coefficients for the fibrinogen molecule were calculated for arbitrary orientations of the arms whose length was varied between 12 and 18nm. Orientation averaged hydrodynamic radii and intrinsic viscosities were also calculated by considering interactions between the side arms and the core of the fibrinogen molecule. Whereas the hydrodynamic radii changed little with the interaction magnitude, the intrinsic viscosity exhibited considerable variation from 30 to 60 for attractive and repulsive interactions, respectively. These theoretical results were used for the interpretation of experimental data derived from sedimentation and diffusion coefficient measurements as well as dynamic viscosity measurements. Optimum dimensions of the fibrinogen molecule derived in this way were the following: the contour length 84.7nm, the side arm length 18nm, and the total volume 470nm(3), which gives 16% hydration (by volume). Our calculations enabled one to distinguish various conformational states of the fibrinogen molecule, especially the expanded conformation, prevailing for pH<4 and lower ionic strength, characterized by high intrinsic viscosity of 50 and the hydrodynamic radius of 10.6nm. On the other hand, for the physiological condition, that is, pH=7.4 and the ionic strength of 0.15M NaCl, the semi-collapsed conformation dominates. It is characterized by the average angle equal to <φ>=55°, intrinsic viscosity of 35, and the hydrodynamic radius of 10nm. Additionally, the interaction energy between the arms and the body of the molecule was predicted to be -4kT units, confirming that they are oppositely charged than the central nodule. Results obtained in our work confirm an essential role of the side chains responsible for a highly anisotropic charge distribution in the fibrinogen molecule. These finding can be exploited to explain anomalous adsorption of fibrinogen on various surfaces.     

Comparison of action of mixed permanent chemical modifiers for cadmium and lead determination in sediments and soils by slurry sampling graphite furnace atomic absorption spectrometry

Slurry sampling atomic absorption spectrometry with electrothermal atomization was used to the determination of cadmium (Cd) and lead (Pb) in soils and sediments using permanent modifiers. Comparison of action of mixed permanent modifiers niobium (Nb)/iridium (Ir) and tungsten (W)/iridium (Ir) were studied in detail. The effect of amount of Ir, W and Nb on analytical signals of Cd and Pb was examined. The optimal amounts of modifiers for Cd and Pb determination were stated. Niobium carbide formation on graphite surface was studied for different pyrolysis temperatures. Finally for Cd determination in sediments and soils 200 μg of Nb mixed with 5 μg of Ir was used as permanent modifiers and 15 μg of Nb mixed with 200 μg of Ir for Pb determination. Suspensions were prepared in 5% HNO₃. The analytical procedure was optimized carefully basing on data from pyrolysis and atomization curves studies. Ammonium dihydrogen phosphate was used additionally as matrix modifier during Cd determination in samples in order to prevent interferences coming from matrix components. The analysis of CRMs confirmed the reliability of the proposed approach. The precision and accuracy of Cd and Pb determination by the described method for soils and sediments were acceptable.     

Electrokinetics of particle covered surfaces

This article reviews recent developments in the field of streaming current/potential determination for surfaces covered by particles, including polyelectrolytes and proteins. Special emphasis is focused on the new theoretical results enabling one to evaluate quantitatively the relationship between the streaming potential and surface coverage of particles. Experimental results obtained for model systems of monodisperse polymeric particles are discussed and interpreted in terms of the theoretical approach. These reference data are exploited for interpretation of more complex experimental results obtained for polyelectrolytes and proteins. A major utility of the streaming potential measurements for determination of submonolayer coverages of particles and proteins is pointed out.     

On the role of hydrogen bonds in photoinduced electron-transfer dynamics between 9-fluorenone and amine solvents

Using ultrafast fluorescence upconversion and mid-infrared spectroscopy, we explore the role of hydrogen bonds in the photoinduced electron transfer (ET) between 9-fluorenone (FLU) and the solvents trimethylamine (TEA) and dimethylamine (DEA). FLU shows hydrogen-bond dynamics in the methanol solvent upon photoexcitation, and similar effects may be anticipated when using DEA, whereas no hydrogen bonds can occur in TEA. Photoexcitation of the electron-acceptor dye molecule FLU with a 400?nm pump pulse induces ultrafast ET from the amine solvents, which is followed by 100?fs IR probe pulses as well as fluorescence upconversion, monitoring the time evolution of marker bands of the FLU S(1) state and the FLU radical anion, and an overtone band of the amine solvent, marking the transient generation of the amine radical cation. A comparison of the experimentally determined forward charge-separation and backward charge-recombination rates for the FLU-TEA and FLU-DEA reaction systems with the driving-force dependencies calculated for the forward and backward ET rates reveals that additional degrees of freedom determine the ET reaction dynamics for the FLU-DEA system. We suggest that hydrogen bonding between the DEA molecules plays a key role in this behaviour.     

Influence of Periodic Nitrogen Functionality on the Selective Oxidation of Alcohols

An enhancement in catalytic alcohol oxidation activity is attributed to the presence of nitrogen heteroatoms on the external surface of a support material. The same Pd particles (3.1–3.2 nm) were supported on polymeric carbon–nitrogen supports and used as catalysts to selectively oxidize benzyl alcohol. The polymeric carbon–nitrogen materials include covalent triazine frameworks (CTF) and carbon nitride (C₃N₄) materials with nitrogen content varying from 9 to 58 atomic percent. With comparable metal exposure, estimated by X‐ray photoelectron spectroscopy, the activity of these catalysts correlates with the concentration of nitrogen species on the surface. Because the catalysts showed comparable acidic/basic properties, this enhancement cannot be ascribed to the Lewis basicity but most probably to the nature of N‐containing groups that govern the adsorption sites of the Pd nanoparticles.     

New Strategies for the Simple and Sensitive Voltammetric Direct Quantification of Se(IV) in Environmental Waters Employing Bismuth Film Modified Glassy Carbon Electrode and Amberlite Resin

An analytical procedure regarding the determination of selenium(IV) by anodic stripping voltammetry exploiting the in situ plated bismuth film electrode is described. Since organics are commonly present in untreated natural water samples, the use of Amberlite XAD-7 resin turns out to be quite important to avoid problems such as the adsorption of these compounds on the working electrode. The optimum circumstances for the detection of selenium in water using differential pulse voltammetry techniques were found to be as follows: 0.1 mol L⁻¹ acetic acid, 1.9 × 10⁻⁵ mol L⁻¹ Bi(III), 0.1 g Amberlite XAD-7 resin, and successive potentials of −1.6 V for 5 s and −0.4 V for 60 s, during which the in situ formation of the bismuth film on glassy carbon and the accumulation of selenium took place. The current of the anodic peak varies linearly with the selenium concentration ranging from 3 × 10⁻⁹ mol L⁻¹ to 3 × 10⁻⁶ mol L⁻¹ (r = 0.9995), with a detection limit of 8 × 10⁻¹⁰ mol L⁻¹. The proposed procedure was used for Se(IV) determination in certified reference materials and natural water samples, and acceptable results and recoveries were obtained.