Integrated microfabricated systems including a purification module and an on-chip nano electrospray ionization interface for biological analysis

We report here on an integrated microfabricated device dedicated to the preparation of biological samples prior to their on-line analysis by electrospray ionization-mass spectrometry (ESI-MS). This microfluidic device is fabricated using the negative photoresist SU-8 by microtechnology techniques. The device includes a chromatographic module plus an ESI interface for MS. The chromatographic module is dedicated to sample purification and is based on a polymer monolithic phase which includes hydrophobic moieties. The ESI interface is integrated onto the chip and is based on a capillary slot. We present here the integration of these different modules onto a single system that is fabricated via a SU-8-based microtechnology route. We present also their testing for the purification of peptide samples. This started with a partial integration step with the combination of at least two of the modules (microsystem + monolith; microsystem + nib) and their test before the fabrication and testing of fully integrated microsystems.     

Cyclen based bis-macrocyclic ligands as phosphates receptors. A potentiometric and NMR study

The host-guest interaction between orthophosphate, pyrophosphate and triphosphate anions and four cyclen based bis-macrocycles ligands possessing ortho-(BOC), meta-(BMC), para-xylenyl (BPC) or 2,6-pyridinyl (BPyC) linker was investigated by potentiometric measurements and NMR spectroscopy. Each ligand gave protonated species in aqueous solution that further formed ternary complexes after binding with anions; these complexes were analyzed as a result of hydrogen bond formation and Coulombic attraction between the organic host and the inorganic guest. The equilibrium constants for all the detected species are reported and the selectivity, illustrated with species distribution diagrams, is discussed. The results unambiguously showed the importance of the distance between the two cyclen cores and underlined, especially for the triphosphate species, the contribution of the nitrogen atom of the pyridinyl spacer as a supplementary anchoring point in acidic medium.     

Determination of uranium after its selective extraction as phenylacetate

The method described is based on the extraction of uranium with a chloroform solution of phenylacetic acid from slightly acidic solution containing nitrilotriacetic acid, which masks all interfering metals. After stripping into very dilute hydrochloric acid, uranium is reduced with ascorbic acid and determined complexometrically. The method permits reliable determination of uranium in the presence of all quadri-, ter- and bivalent metals investigated, molybdenum(VI), tungsten(VI), and vanadium(V).     

Effect of included guest molecules on the normal state conductivity and superconductivity of beta''-(ET)(4)[(H(3)O)Ga(C(2)O(4))(3)].G (G = pyridine,nitrobenzene)

Normal state conductivity and superconductivity together with bulk magnetic susceptibility and magnetization measurements have been measured for two molecular charge-transfer salts: beta' '-(ET)4[(H3O)Ga(C2O4)3]G (ET = bis(ethylenedithio)tetrathiafulvalene, G = pyridine for compound I and nitrobenzene for compound II). With the exception of the included guest molecules (G) the crystal structures are almost identical. Both show minima in their electrical transport at 130 K for I and at 160 K for II, but at lower temperatures their behaviors differ markedly. The resistance of I reaches a maximum at 50 K with a further small peak at 2 K and possible superconductivity only below 2 K, whereas that of II increases continuously down to 7.5 K, where an abrupt transition to a superconducting state occurs.     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

Electrophilic acetylation and bromination reactions of benzo[b]naphtho[2,3-e][1,4]dioxin

The reactivity of benzo[b]naphtho[2,3-e][1,4]dioxin in the electrophilic aromatic substitution reactions has been studied. Friedel-Crafts acetylation resulted in the formation of three out of the possible five monoacetylated products, with the acetyl group located in positions 8 (major), 7 and 6 (minor) of the heterocycle. In the bromination reaction a higher selectivity was observed with the 6-bromo derivative found as the only monobrominated product and the 6,11-dibromo derivative found as the only polybrominated product. A ratio of unreacted heterocycle:6-bromo:6,11-dibromo derivatives in the bromination reaction has been found to depend strongly on the reaction conditions and on the heterocycle:bromine ratio.     

Electrophoretic separations of twelve phenothiazines and N-demethyl derivatives by using capillary zone electrophoresis and micellar electrokinetic chromatography with non ionic surfactant

We focused our work on the separation of phenothiazines that are important drugs used for the treatment of psychic diseases. For a better understanding of the metabolism of these solutes, we wanted to separate not only a mixture of 12 phenothiazines but also a mixture containing phenothiazines and their N-demethyl metabolites by capillary electrophoresis. Separations in capillary zone electrophoresis were performed using 3 x 10(-2) mol/L H3PO4 (pH 2.5) but the obtained resolutions were not entirely satisfactory especially with regard to phenothiazine -N-demethyl derivative pairs. To improve the obtained results, we have performed separations by using micellar electrokinetic chromatography. In this approach, we used a running electrolyte containing 3 x 10(-2) mol/L H3PO4 electrolyte (pH 2.5) and octaethylene glycol monododecyl ether (C12E8) as neutral surfactant. By introducing 2 x 10(-3) mol/L C12E8 in the electrolyte, 11 out of 12 phenothiazines have been baseline separated. With respect to the separation of a mixture containing 3 phenothiazines and their 3 demethyl derivatives, we obtained an excellent separation by using a running electrolyte prepared with 7.5 x 10(-4) mol/L C12E8 and 3 x 10(-2) mol/L H3PO4.     

Pd/P(t-Bu)(3): a mild and general catalyst for Stille reactions of aryl chlorides and aryl bromides

Pd/P(t-Bu)(3) serves as an unusually reactive catalyst for Stille reactions of aryl chlorides and bromides, providing solutions to a number of long-standing challenges. An unprecedented array of aryl chlorides can be cross-coupled with a range of organotin reagents, including SnBu(4). Very hindered biaryls (e.g., tetra-ortho-substituted) can be synthesized, and aryl chlorides can be coupled in the presence of aryl triflates. The method is user-friendly, since a commercially available complex, Pd(P(t-Bu)(3))(2), is effective. Pd/P(t-Bu)(3) also functions as an active catalyst for Stille reactions of aryl bromides, furnishing the first general method for room-temperature cross-couplings.