Stereodivergent Carbamate Synthesis by Selective in Situ Trapping of Organic Carbonate Intermediates

Trans carbamates have been prepared in a diastereoselective approach by a judicious one‐pot combination of organic carbonates, prepared in situ, and suitable amine reagents under appropriate reaction conditions. This unprecedented approach allows for stereodivergence from a single oxirane substrate with easy access to both cis and trans carbamate isomers with high stereoselectivity (>19:1 d.r.). Key to the control of the diastereoselective nature of the conversions that lead to the trans carbamates is the in situ formation of trans‐configured oligo/polycarbonates through Al catalysis, which provides the targeted products after aminolysis. The present results demonstrate the valorization of a renewable carbon‐based reagent (CO₂) into new valuable scaffolds and an unusual stereocontrol exerted through carbonate intermediates. A series of control experiments support the proposed mechanistic rationale towards the trans carbamate products, which is based on the trapping of an in situ formed trans‐configured oligo/polycarbonate.     

Morphology of Imidazolium‐Based Ionic Liquids as Deposited by Vapor Deposition: Micro‐/Nanodroplets and Thin Films

The morphology of micro‐ and nanodroplets and thin films of ionic liquids (ILs) prepared through physical vapor deposition is presented. The morphology of droplets deposited on indium‐tin‐oxide‐coated glass is presented for the extended 1‐alkyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C_nC₁im][Ntf₂]; n=1–8) series, and the results show the nanostructuration of ILs. The use of in‐vacuum energetic particles enhances/increases the nanodroplets mobility/coalescence mechanisms and can be a pathway to the fabrication of thin IL films.     

Polymer structure and the compensation effect of the diffusion pre-exponential factor and activation energy of a permeating solute

In the present work, the relation between the pre-exponential factor and the apparent activation energy of diffusion, ln D(0) = alpha + betaE(D), so-called compensation effect, is re-examined and critically discussed for diffusion of gases in rubbery and glassy polymers. In principle, the above equation could be derived from the enthalpy-entropy compensation in the framework of the transition state theory. However, one should consider the influence of the jump length term contained in the pre-exponential factor, which may be affected by permeating species and polymer properties. We found that parameter alpha depends on penetrant size and polymer properties, such as local chain mobility and free volume. This can be interpreted by the fact that the jump length is affected by both penetrant and polymer properties. Finally, methods for estimating the jump length are discussed.     

Exploiting the Multidentate Nature of Chiral Disulfonimides in a Multicomponent Reaction for the Asymmetric Synthesis of Pyrrolo[1,2‐a]indoles: A Remarkable Case of Enantioinversion

A new multicomponent coupling reaction for the enantioselective synthesis of pyrrolo[1,2‐a]indoles under the catalysis of a chiral disulfonimide is described. The high specificity of the reaction is a consequence of the multidentate character of the Brønsted acid catalyst. Insights from DFT calculations helped explain the unexpected high enantioselectivity observed with the simplest 3,3′‐unsubstituted binaphthyl catalyst as a result of transition‐state stabilization by a network of cooperative noncovalent interactions. The remarkable enantioinversion resulting from the simple introduction of substituents at 3‐ and 3′‐positions, the first reported example of this phenomenon in the context of binaphthalene‐derived Brønsted acid catalysis, was instead attributed to destabilizing steric interactions.     

Mixed unsymmetric oxadiazoline and/or imine platinum(II) complexes

Iminoacylation of acetone oxime Me(2)C[double bond, length as m-dash]NOH upon reaction with trans-[PtCl(2)(NCCH(2)CO(2)Me)(2)] and [2 + 3] cycloaddition of acyclic nitrone (-)O(+)N(Me) = C(H)(C(6)H(4)Me-4) to a nitrile ligand in lead to the formation of mono-imine trans-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] [imine-a = NH[double bond, length as m-dash]C(CH(2)CO(2)Me)ON = CMe(2)] and mono-oxadiazoline trans-[PtCl(2)(oxadiazoline-a)(NCCH(2)CO(2)Me)] [oxadiazoline-a = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)ON(Me)C[upper bond 1 end](H)(C(6)H(4)Me-4)] unsymmetric mixed ligand complexes, respectively, as the main products. Reactions of or with acetone oxime , cyclic nitrone (-)O(+)N = CHCH(2)CH(2)C[upper bond 1 end]Me(2) or N,N-diethylhydroxylamine give access, in moderate to good yields, to the unsymmetric mixed ligand oxadiazoline and/or imine complexes trans-[PtCl(2)(oxadiazoline-a)(imine-a)] , trans-[PtCl(2)(oxadiazoline-a)(oxadiazoline-b)] [oxadiazoline-b = [upper bond 1 start]N[double bond, length as m-dash]C(CH(2)CO(2)Me)O[lower bond 1 start]NC[upper bond 1 end](H)CH(2)CH(2)C[lower bond 1 end]Me(2)], trans-[PtCl(2)(imine-a)(imine-b)] [imine-b = NH = C(CH(2)CO(2)Me)ONEt(2)] or trans-[PtCl(2)(imine-a)(oxadiazoline-b)] . The cis mono-imine mixed ligand complex cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] is the major product from the reaction of cis-[PtCl(2)(NCCH(2)CO(2)Me)(2)] with the oxime , while the di-imine compound cis-[PtCl(2)(imine-a)(2)] is a minor product. Reaction of cis-[PtCl(2)(imine-a)(NCCH(2)CO(2)Me)] with N,N-diethylhydroxylamine or the cyclic nitrone affords, in good yields, the unsymmetric mixed ligand complexes cis-[PtCl(2)(imine-a)(imine-b)] or cis-[PtCl(2)(imine-a)(oxadiazoline-b)] , respectively. All these complexes were characterized by elemental analyses, IR and (1)H, (13)C and (195)Pt NMR spectroscopies, and FAB(+)-MS. The X-ray structural analysis of trans-[PtCl(2){NH=C(CH(2)CO(2)Me)ON=CMe(2)}(NCCH(2)CO(2)Me)] is also reported.     

Method validation for the simultaneous determination of fecal sterols in surface waters by gas chromatography-mass spectrometry

Besides microbiological methods, fecal pollution of surface waters is estimated by gas chromatographic (GC) determination of sterols present in human and animal sewage effluents. The most frequently used biomarkers for the evaluation of contamination levels include coprostanol, cholesterol, dihydrocholesterol, stigmasterol, beta-sitosterol, and stigmastanol. Although several GC techniques are used to measure these compounds in aquatic systems, the analytical performance of GC-mass spectrometric (MS) determination of these sterols has not been systematically characterized. Therefore, the aim of this work is to validate a simple and rapid GC-MS method for the simultaneous analysis of six sterols, considering all parameters and requirements defined by Good Laboratory Practice. Following liquid-liquid extraction of spiked surface water samples, the extracts are silylated and analyzed by GC-MS. The method is evaluated for linearity and limits of detection and quantitation, as well as for precision, extraction efficiency, and stability. The assay is linear up to 160 ng; the limits of detection and quantitation are 5-10 ng and 20 ng, respectively. The within- and between-day precision ranged from 1% to 9% and 1% to 16%, respectively. The extraction efficiency was 65-80%. The stability studies indicate that the sterols in surface water samples begin to degrade after 24 h of refrigerated storage. However, three freeze/thaw cycles could be performed without their decomposition. The method is applied to the analysis of surface water and wastewater samples. The technical advantages make this GC-MS analysis suitable for routine environmental monitoring of fecal pollution in aquatic systems.     

Ab initio calculation of the NH(3sigma-)-NH(3sigma-) interaction potentials in the quintet, triplet, and singlet states

We present the ab initio potential-energy surfaces of the NH-NH complex that correlate with two NH molecules in their 3sigma- electronic ground state. Three distinct potential-energy surfaces, split by exchange interactions, correspond to the coupling of the S(A) = 1 and S(B) = 1 electronic spins of the monomers to dimer states with S = 0, 1, and 2. Exploratory calculations on the quintet (S = 2), triplet (S = 1), and singlet (S = 0) states and their exchange splittings were performed with the valence bond self-consistent-field method that explicitly accounts for the nonorthogonality of the orbitals on different monomers. The potential surface of the quintet state, which can be described by a single Slater determinant reference function, was calculated at the coupled cluster level with single and double excitations and noniterative treatment of the triples. The triplet and singlet states require multiconfiguration reference wave functions and the exchange splittings between the three potential surfaces were calculated with the complete active space self-consistent-field method supplemented with perturbative configuration interaction calculations of second and third orders. Full potential-energy surfaces were computed as a function of the four intermolecular Jacobi coordinates, with an aug-cc-pVTZ basis on the N and H atoms and bond functions at the midpoint of the intermolecular vector R. An analytical representation of these potentials was given by expanding their dependence on the molecular orientations in coupled spherical harmonics, and representing the dependence of the expansion coefficients on the intermolecular distance R by the reproducing kernel Hilbert space method. The quintet surface has a van der Waals minimum of depth D(e) = 675 cm(-1) at R(e) = 6.6a0 for a linear geometry with the two NH electric dipoles aligned. The singlet and triplet surfaces show similar, slightly deeper, van der Waals wells, but when R is decreased the weakly bound NH dimer with S = 0 and S = 1 converts into the chemically bound N2H2 diimide (also called diazene) molecule with only a small energy barrier to overcome.     

Atomic XAFS as a tool to probe the electronic properties of supported noble metal nanoclusters

Atomic XAFS is a very attractive technique for probing electronic properties of supported metal nanoclusters. For platinum nanoparticles on different supports, the technique is found to be in good agreement with infrared CO adsorption measurements. The advantages of AXAFS, however, are that no probe molecule is required and that real-time measurements under reaction conditions are possible.     

Определение средней величины кристаллик ов кварца И графита на основани и первичной экстинкц ии

— —10 ^–4 —10 ^–2 . , . , , , , , .