Anticancer Agents from the Australian Tropical Rainforest: Spiroacetals EBC‐23, 24, 25, 72, 73, 75 and 76

EBC‐23, 24, 25, 72, 73, 75 and 76 were isolated from the fruit of Cinnamomum laubatii (family Lauraceae) in the Australian tropical rainforests. EBC‐23 ( 1 ) was synthesized stereoselectively, in nine linear steps in 8 % overall yield, to confirm the reported relative stereochemistry and determine the absolute stereochemistry. Key to the total synthesis was a series of Tietze–Smith linchpin reactions. The novel spiroacetal structural motif, exemplified by EBC‐23 ( 1 ), was found to inhibit the growth of the androgen‐independent prostate tumor cell line DU145 in the mouse model, indicating potential for the treatment of refractory solid tumors in adults.     

High-efficiency 60 W TEM(00) Nd:YVO(4) oscillator pumped at 888 nm

We propose a technique for pumping Nd:YVO(4) with high optical power at 888nm while making absorption independent of the pump light polarization state. This is especially suitable for systems end pumped by high-power, high-brightness fiber-coupled diode sources associated with long vanadate crystals to effectively spread the heat load in a large volume. A compact 60 W output, 55% optical efficiency cw TEM(00) oscillator was demonstrated.     

Electrochemical texturing of Al-doped ZnO thin films for photovoltaic applications

The processes during chemical and electrochemical etching of Al-doped ZnO are investigated utilizing a scanning flow cell setup with online detection of dissolved Zn ions. The rate of chemical dissolution was found to be a linear function of buffer and proton concentration in near neutral pH solutions according to a transport limited reaction. In contrast, electrochemical etching is limited by the kinetics of the reaction and increases linearly with the imposed current density. Due to this fundamental difference, the dissolution of Zn can be either uniform over the whole surface or highly localized at active sites like grain boundaries. A combined approach of chemical etching and the well-controllable galvanostatic dissolution thus allows a fine adjustment of the ZnO:Al surface texture for applications in silicon thin film photovoltaic cells in order to improve their overall energy conversion efficiency.     

FTIR microscopy of biological cells and tissue: data analysis using resonant Mie scattering (RMieS) EMSC algorithm

Transmission and transflection infrared microscopy of biological cells and tissue suffer from significant baseline distortions due to scattering effects, predominantly resonant Mie scattering (RMieS). This scattering can also distort peak shapes and apparent peak positions making interpretation difficult and often unreliable. A correction algorithm, the resonant Mie scattering extended multiplicative signal correction (RMieS-EMSC), has been developed that can be used to remove these distortions. The correction algorithm has two key user defined parameters that influence the accuracy of the correction. The first is the number of iterations used to obtain the best outcome. The second is the choice of the initial reference spectrum required for the fitting procedure. The choice of these parameters influences computational time. This is not a major concern when correcting individual spectra or small data sets of a few hundred spectra but becomes much more significant when correcting spectra from infrared images obtained using large focal plane array detectors which may contain tens of thousands of spectra. In this paper we show that, classification of images from tissue can be achieved easily with a few (<10) iterations but a reliable interpretation of the biochemical differences between classes could require more iterations. Regarding the choice of reference spectrum, it is apparent that the more similar it is to the pure absorption spectrum of the sample, the fewer iterations required to obtain an accurate corrected spectrum. Importantly however, we show that using three different non-ideal reference spectra, the same unique correction solution can be obtained.     

CO2 on a Tightrope: Stabilization,Room‐Temperature Decarboxylation,and Sodium‐Induced Carboxylate Migration

A sterically shielded 3‐substituted zwitterionic N,N‐dimethylisotryptammonium carboxylate has been synthesized by consecutive chemoselective double alkylation of indole. The carboxylate undergoes a quantitative and unusually facile decarboxylation in dimethyl sulfoxide (DMSO) or dimethyl formamide (DMF) at room temperature. The breaking of a nearly equidistant hydrogen bond by solvent molecules initiates heterolytic C? C cleavage. The decarboxylation rate decreases with increasing CO₂ partial pressure, proving the competitiveness of protonation and re‐carboxylation of the carbanionic intermediate. Corresponding spiro compounds containing silylene and stannylene moieties show high thermal stability. Addition of an excess of methyllithium to the sodium salt triggers a reaction sequence comprising a deprotonation, carboxylate transfer, and nucleophilic trapping of the rearranged carboxylate by another equivalent of methyllithium. Hydrolytic work‐up of the geminal diolate leads to an acetyl product. The role of the sodium counterion and the mechanism of the rearrangement have been unraveled by deuteration experiments.     

Heteroleptic FeII Complexes of 2,2′‐Biimidazole and Its Alkylated Derivatives: Spin‐Crossover and Photomagnetic Behavior

Three iron(II) complexes, [Fe(TPMA)(BIM)](ClO₄)₂?0.5H₂O ( 1 ), [Fe(TPMA)(XBIM)](ClO₄)₂ ( 2 ), and [Fe(TPMA)(XBBIM)](ClO₄)₂ ?0.75CH₃OH ( 3 ), were prepared by reactions of Fe^II perchlorate and the corresponding ligands (TPMA=tris(2‐pyridylmethyl)amine, BIM=2,2′‐biimidazole, XBIM=1,1′‐(α,α′‐o‐xylyl)‐2,2′‐biimidazole, XBBIM=1,1′‐(α,α′‐o‐xylyl)‐2,2′‐bibenzimidazole). The compounds were investigated by a combination of X‐ray crystallography, magnetic and photomagnetic measurements, and Mössbauer and optical absorption spectroscopy. Complex 1 exhibits a gradual spin crossover (SCO) with T_1/2=190 K, whereas 2 exhibits an abrupt SCO with approximately 7 K thermal hysteresis (T_1/2=196 K on cooling and 203 K on heating). Complex 3 is in the high‐spin state in the 2–300 K range. The difference in the magnetic behavior was traced to differences between the inter‐ and intramolecular interactions in 1 and 2 . The crystal packing of 2 features a hierarchy of intermolecular interactions that result in increased cooperativity and abruptness of the spin transition. In 3 , steric repulsion between H atoms of one of the pyridyl substituents of TPMA and one of the benzene rings of XBBIM results in a strong distortion of the Fe^II coordination environment, which stabilizes the high‐spin state of the complex. Both 1 and 2 exhibit a photoinduced low‐spin to high‐spin transition (LIESST effect) at 5 K. The difference in the character of intermolecular interactions of 1 and 2 also manifests in the kinetics of the decay of the photoinduced high‐spin state. For 1 , the decay rate constant follows the single‐exponential law, whereas for 2 it is a stretched exponential, reflecting the hierarchical nature of intermolecular contacts. The structural parameters of the photoinduced high‐spin state at 50 K are similar to those determined for the high‐spin state at 295 K. This study shows that N‐alkylation of BIM has a negligible effect on the ligand field strength. Therefore, the combination of TPMA and BIM offers a promising ligand platform for the design of functionalized SCO complexes.     

Viscosalines B1,2 and E1,2: Challenging New 3‐Alkyl Pyridinium Alkaloids from the Marine Sponge Haliclona viscosa

Four new 3‐alkyl pyridinium alkaloids, the viscosalines B₁ ( 1 a ), B₂ ( 1 b ), E₁ ( 2 a ), and E₂ ( 2 b ), were isolated from the Arctic sponge Haliclona viscosa. The structure elucidation of these isomeric compounds was challenging due to ambiguous fragments that derive during “standard” mass spectrometric fragmentation experiments. The final structure elucidation relied on the use of a combination of synthesis, liquid chromatography, and mass spectrometry. Three different mass spectrometers were used to differentiate between the synthetic structural isomers: a time‐of‐flight (TOF) mass spectrometer and two ion‐trap mass spectrometers with different ion‐transfer technologies (i.e., skimmer versus funnel optics). Although at first none of the spectrometers returned spectra that permitted structure elucidation, all three mass spectrometers provided analysis that successfully differentiated between the isomers after thorough method optimization. The use of in‐source collision‐induced dissociation (CID) with the ion trap and TOF instrument returned the most interesting results. The mode of fragmentation of the viscosalines under different experimental conditions is described herein. After successful optimization of the mass spectrometric method applied, the chromatographic method was improved to distinguish the previously inseparable isomers. Finally, both the liquid chromatography and mass spectrometric methods were applied to the natural products and the results compared to those from the synthetic compounds.     

Mo基多组分催化剂催化丙烷选择氧化制丙烯醛

用共沉淀法制备了不同比例的MoCrTeO、MoCoTeO和MoCrTeCoO复合氧化物催化剂,考察其对丙烷选择氧化制丙烯醛反应的催化性能,并对反应温度、空速、原料气比例等条件进行优化,得到丙烯醛最高产率为22．96％．实验结果表明,Te元素的添加对提高丙烯醛的选择性和产率起了十分重要的作用,但过高的Te含量却不利于丙烷的转化率．X射线衍射表征结果表明,催化剂中正交系TeMo5O16相可能是丙烷选择氧化制丙烯醛反应的重要的活性相．