Determination of mercury by radiochemical displacement method

A radiochemical displacement method for the determination of micro amounts of Hg(II) has been developed. 65Zn was displaced from the Zn-1-(2-pyridylazo-2-naphthol) complex at pH 5 in borate buffers by Hg (II). 10-80 micrograms of mercury could be determined. Interference of various metal ions and methods for suppression have also been carried out.     

Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

An Observation on the Experimental Measurement of Dislocation Density

The common practice of ignoring the elastic strain gradient in measurements of geometrically necessary dislocation (GND) density is critically examined. It is concluded that the practice may result in substantial errors. Our analysis points to the importance of spatial variations of the elastic strain field in relation to its magnitude in inferring estimates of dislocation density from measurements.     

Trace element determination in high-purity aluminum clad samples by k 0-based internal monostandard instrumental neutron activation analysis

The k₀-based internal monostandard instrumental neutron activation analysis (IM-INAA) method was applied for quantification of trace impurities in seven high purity aluminum samples used as fuel cladding in a research reactor. Samples along with BCS CRM 182 (Si–Al alloy) were irradiated in high flux reactor neutrons for 10–15 h. In situ detection efficiency, needed in concentration calculation ratio by IM-INAA, was obtained using gamma rays of activation products produced in the samples. Elemental concentration ratios obtained with respect to Fe (used as internal monostandard) were converted to absolute concentrations by determining concentration of Fe by relative method of NAA. Concentrations of ten trace elements (Sc, Cr, Co, Zn, Ga, La, Ce, Sm, W and Hf) including major element Fe were determined in this work. The method used is non-destructive in nature and does not need multielement standards. Results of IM-INAA were compared with those obtained by relative method of INAA and inductively coupled plasma atomic emission spectrometry (ICP-AES). Details of methodologies and results obtained by all methods are discussed and compared in the paper.     

Trichloroisocyanuric Acid–KF as an Efficient Reagent for One-Pot Synthesis of Dialkylfluorophosphates from Dialkylphosphites

Trichloroisocyanuric acid–KF afforded dialkylfluorophosphates from dialkylphosphites at room temperature through a facile electrophilic–nucleophilic metathesis.     

Determination of trace concentrations of thorium in uranium oxide matrix by epithermal instrumental neutron activation analysis

An epithermal instrumental neutron activation analysis (EINAA) method using cadmium filter was standardized to determine trace concentrations of thorium in four samples of uranium oxide (U₃O₈) samples. Samples and thorium standards, wrapped with cadmium foil, were irradiated at a reactor neutron flux of about 10¹² cm^?2 s^?1. Radioactive assay was carried out using a Compton suppressed anticoincidence gamma ray spectrometer consisting of HPGe-BGO detectors coupled to MCA. Concentrations of thorium in these samples were found to be in the range of 15–72 mg kg^?1. EINAA results were validated by determining thorium concentrations in uranium matrix by standard addition method. EINAA results were compared with those obtained by two wet chemical methods namely ion chromatography (IC) and inductively coupled plasma atomic emission spectrometry (ICP-AES). The results obtained by the three methods were found to be in good agreement, indicating further validity of the proposed EINAA method.     

Tween-80–n-Butanol–Diesel–Water Microemulsion System—A Class of Alternative Diesel Fuel

Tween-80–n–butanol–diesel–water microemulsion systems with various surfactant:cosurfactant (S:C) ratio have been reported as a class of alternative diesel fuel from their phase behavior, clouding phenomena, conductivity, turbidity, and inflammation studies. Temperature induced clouding of microemulsion containing 2% brine at an S:C ratio of 1:1 from a suitable turbid zone has been examined to see the stability of the diesel–water microemulsion systems. Regression models have been proposed to understand the impact of various components of the microemulsion on their cloud point (CP) values. Conductivity of the microemulsions at various S:C ratio increases with the volume of brine having two cut points depicting the presence of three microheterogenous phases within the system, whereas turbidity shows a linear increase. Dye-probed investigation of water-rich and oil-rich zones of the microemulsions indicates the involvement of a dynamic mass transfer process within the various zones. The intensities of flames produced during burning of the microemulsions with various O:E:W weight percentages selected from the isotropic regions of the phase diagrams have been estimated using MATLAB image processing method and the impacts of various components on the fuel use of the microemulsions have been analyzed.     

Determination of fluorine concentrations in soil samples using proton induced gamma-ray emission

A non-destructive, in situ current normalized particle induced gamma-ray emission methodology has been standardized for quantification of fluorine (F) in soil samples from Punjab state, India. The samples were irradiated using 4 MeV proton beam from the Folded Tandem Ion Accelerator at BARC, Mumbai. The gamma rays of energies 197 and 478 keV arising from ¹⁹F(p, p′γ)¹⁹F and ⁷Li(p, p′γ)⁷Li nuclear reactions were measured using high resolution gamma-ray spectrometry. The concentration of fluorine in soil samples was found to vary between 414 and 5,746 mg kg^?1.