氧化铝载体对Pt-Sn-K/γ-Al2O3催化剂上异丁烷脱氢性能的影响

采用盐酸回流法和氨水沉淀法合成了氧化铝载体,并通过络合真空浸渍法制备了不同来源氧化铝负载的Pt-Sn-K/γ-Al₂O₃催化剂。利用N₂物理吸附、CO脉冲吸附、H₂程序升温还原、NH₃程序升温脱附、热重等手段对Pt-Sn-K/γ-Al₂O₃催化剂进行了表征,以异丁烷脱氢为探针反应研究了氧化铝载体对该催化剂脱氢性能的影响。结果表明,与由盐酸回流法合成的载体制备的催化剂相比,采用氨水沉淀法合成的氧化铝载体制备的Pt-Sn-K/γ-Al₂O₃催化剂表面具有较小的Pt颗粒和较弱的酸性分布,其脱氢活性及异丁烯选择性更优。14 d的连续运行数据显示,由氨水沉淀合成的载体制备的催化剂,其抗积炭能力更强,反应后催化剂的积炭石墨化程度更低,因而具有更好的稳定性;在该催化剂上,异丁烷初始转化率为56.67%,14 d后仍能达到34.71%,异丁烯初始选择性为80%,7 d后维持在94%左右。     

热散焦效应对甲烷后向受激喇曼散射的影响

The conversion efficiency of stimulated Raman scattering (SRS) in CH4 is studied by using a single longitudinal mode second-harmonic Nd:YAG laser (532 nm, linewidth 0.003 cm-1, pulse-width (FWHM) 6.5 ns).Due to the heat release from vibrationally excited particles, SRS processes often suffer from the thermal defocusing effect (TDE). In view of 6.5 ns laser pulse width is much shorter than the vibrational relaxation time of CH4 molecules, TDE can only affect the SRS processes afterwards. In the cases of low laser repetition, TDE will be not serious, because it will be removed by the thermal diffusion in Raman medium before the next pulse arrives. At the laser repetition rate 2 Hz, CH4 pressure 1.1 MPa and pump laser energy 95 m J, the quantum conversion efficiency of backward first-Stokes (BS1) has attained 73%. This represents the highest first-stokes conversion efficiency in CH4. Furthermore, due to the relaxation oscillation, the BS1pulses are narrowed to about 1.2 ns. As a result, the BS1 peak power turns out to be 2.7 times that of the pump. Its beam quality is also much better and is only slightly affected by TDE. This reason is that BS1 represents a wave-front-reversed replica of the pump beam, which can compensate the thermal distortions in Raman amplify process. Under the same conditions, but pump laser repetition rate as 10 Hz, the conversion efficiency of BS1 goes down to 36% due to TDE. From this study, we expect that a well-behaved 630 nm Raman laser may be designed by using a closed CH4/He circulating-cooling system, which may have some important applications.     

Parallel-oriented fibrogenesis of a beta-sheet forming peptide on supported lipid bilayers

Peptide self-assembly on substrates is currently an intensively studied topic that provides a promising strategy for fabrication of soft materials and is also important for revealing the surface chemistry of amyloidogenic proteins that aggregate on cell membranes. We investigated the fibrogenesis of a beta-sheet forming peptide Abeta(26-35) on supported lipid bilayers (SLBs) by in situ atomic force microscopy (AFM), circular dichroism (CD), and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The results show that the Abeta(26-35) nanofilaments' growth is oriented to a specific direction and formed a highly ordered, large-scale, parallel-oriented surface pattern on membranes. The parallel-oriented fibrogenesis of Abeta(26-35) was able to occur on different lipid membranes rather than on solid substrates. It implies that the parallel-oriented fibrogenesis was associated with the distinct properties of lipid membranes, such as the fluid nature of lipid molecules on membranes. The membrane fluidity may allow the peptide assemblies to float at the water-membrane interface and easily orient to an energetically favorable state. These results provide an insight into the surface chemistry of peptide self-assembly on lipid membranes and highlight a possible way to fabricate supramolecular architectures on the surface of soft materials.     

Thin plate spline radial basis functions for vibration analysis of clamped laminated composite plates

A meshless method based on thin plate spline radial basis functions and higher-order shear deformation theory are presented to analyze the free vibration of clamped laminated composite plates. The singularity of thin plate spline radial basis functions is eliminated by adding infinitesimal to the zero distance. Convergence characteristics of the present thin plate spline radial basis functions for the vibration analysis of the clamped laminated plates are investigated. The frequencies computed by the present method agree well with the available published results.     

A coordination complex system for generic, ultrafast, and sensitive multimode fluorescent staining of biomolecules

Gel electrophoresis staining methodologies documented thus far are largely utilized in a biomolecule context-dependent manner. We report herein the development of a generic, ultrafast, and sensitive multimode fluorescent system for the efficient identification of DNA, RNA, and proteins. Interaction between a positively charged, planar ligand-based coordination complex with partner biomolecule leads to aggregation-induced fluorescence quenching and allows for the image contrast generation within one minute. Alternatively, successive reactions of the biomolecule-loaded gel with cation and ligand, in either order of sequence, provide an equally effective staining efficacy. Image contrast reversal is accomplished through a facile washing or photobleaching procedure. The versatility in the applicable target species and signal generation modes provides a hint at the design of novel staining structures and potentially enables the high-throughput readout of biomolecules.     

一氧化碳的双共振多光子电离研究

用两束脉冲染料激光进行了CO的光学双共振四光子电离, 获得了转动分辩的CO A~(1Π)←X~(1Σ~+)和B~(1Σ~+)←A~(1Π)跃迁的光谱。观察到了在此2+1光子相继吸收中特有的选择定则。动力学研究表明CO基态到A~(1Π)态的双光子吸收是速率决定步骤, 其吸收截面约为1×10~(-49) cm~4 s。还测定了A~(1Π)态的单态转动传能截面。对于宇称指数e守恒、△J×±1的过程的截面约为0.05 nm; 随△J值增大而减小。对相同的△J, e正负变号的过程的截面总是小于e不变过程的截面。     

以微孔β沸石为硅铝源合成强酸性介孔分子筛

以微孔β沸石为硅铝源,通过碱处理和以十六烷基三甲基溴化铵为模板剂,合成了具有较强酸性的六方结构介孔分子筛材料B-MCM-41,并采用XRD、N₂吸附脱附、FT-IR、²7Al MAS NMR、HRTEM和水热处理等手段对其进行了结构表征,采用NH₃-TPD对其进行了酸性表征。实验结果表明,B-MCM-41具有明显强于常规介孔分子筛的酸性,且在C⁺₁0混合芳烃加氢脱烷基化反应中表现出了良好的催化性能。这主要是由于碱溶液将β沸石降解为沸石结构单元,在表面活性剂作用下五元环次级结构单元被引入了介孔铝硅酸盐B-MCM-41的结构。     

汽油族组成的近红外光谱快速测定

以荧光指示剂吸附色谱法（FIA）测定汽油族组成结果为基础，采用近红外光谱和化学计量学方法建立了快速、准确测定催化裂化馏出口汽油族组成（饱和烃、烯烃和芳烃）的分析模型；试验表明，该法分析速度快、重复性好、成本低，特别适用于生产中间控制分析。     

YBa2Cu1-xCox(Cu1-yZny)2Oz体系的Co,Zn共同掺杂效应

本文报道通过对YBa₂Cu_1-xCo_x(Cu_1-yZn_y)₂O_z(0≤x,y≤0.1)体系晶体结构、氧含量、正常态电阻-温度关系、Hall效应以及超导临界温度等的综合测量,发现随着Co和Zn含量的增加,体系经历了从正交结构的超导金属向四方结构的非超导半导体的转变,超导临界温度T_c和载流子浓度n_h均迅速下降,Co 关键词：     

Synthesis of Iso-condensed Heteroaromatic Pyrroles and Their Application in the Preparation of Conducting Polymers

Iso-condensed heteroaromatic pyrroles 1 are 10 -electron aromatic compounds. They are of interest from both theoretical and synthetic points of view. They are the cyclic analogues of heteroaromatic ortho-quinodimethanes 2, and can react with dienophiles in a Diels-Alder reaction to give the synthetically useful cycloadducts 3. Many of them are also of potential pharmaceutical importance because they are isosteric with indoles. Iso-condensed heteroaromatic pyrroles 1 can be used also as the monomers for the synthesis of new conducting polymers 5 with special properties and characteristics. However, the methods for the efficient preparation of the iso-condensed heteroaromatic pyrroles are quite limited. Iso-condensed heteroaromatic pyrroles are generally unstable in acidic conditions and are easily oxidized by air. In our laboratories, we developed three methods for the preparation of this labile heterocyclic ring system under acidic, neutral, and basic conditions.1 Synthesis of the conjugated systems such as 6 for OLED applications will also be discussed.