Spectrophotometric determination of ruthenium after extraction of perruthenate with benzyltributylammonium chloride

A simple and convenient extractive spectrophotometric method for the determination of ruthenium has been developed. It is based on the oxidation of the different ruthenium (II, III or IV) species to perruthenate with potassium periodate at pH 7.8. The perruthenate is then extracted with benzyltributylammonium chloride in chloroform followed by direct spectrophotometric measurements at 342 and 380 nm. The optimum concentration range was found to be 0.1–5 mg l^–1, the standard deviation ±2.1%. The method has been successfully applied to the determination of ruthenium in organoruthenium compounds.     

Kinetic Spectrophotometric Determination of Ritodrine Hydrochloride in Dosage Forms

A simple and sensitive kinetic method was developed for the determination of ritodrine hydrochloride in pharmaceutical preparations. The method is based upon a kinetic investigation of the oxidation reaction of the drug with alkaline potassium permenganate at room temperature for a fixed 12.5 min; the absorbance of the colored permenganate ion was measured at 609 nm. The absorbance concentration plots were rectilinear over the range of 1.6–11.2 μg mL^?1 (r = 0.9992) with a minimum detectability of 0.096 μgmL^?1 (2.88 × 10^?7 M). The different experimental parameters affecting the development and stability of color were carefully studied and optimized. The determination of ritodrine hydrochloride by the fixed concentration and rate constant methods is also feasible with the calibration equations obtained, but the fixed time method has been found to be more applicable. The proposed method was applied successfully to the determination of ritodrine hydrochloride in tablets and ampoules with average recoveries of 100.37 ± 0.93% and 100.42 ± 0.87%, respectively. The results obtained were in good agreement with those obtained using a reference method for comparison. A proposal of the reaction pathway is also presented.     

2-Amino-1-cyan-glutaconsäureamid-1-methylester,ein Dimeres des Cyanessigesters und Cyanacetamid

Synthesis of methyl 3-amino-4-carbomyl-2-cyano-2-butenoate is described and2 a classified as a dimer of methyl cyanoacetate and cyanoacetamide. By ammonolysis of the dimer of methyl cyanoacetate with dimethylamine and anilines, resp. the dimethylamide and anilides, resp. (2 b and3 a–j) are obtained. Condensation with salicylaldehyde to the pyrone derivative4 proves the structure of2 a, ring closure reactions in basic or acidic medium yield the pyridones6 a and7 a,b, coupling with diazonium salts the pyridazines8 a–d. The amides2 and the anilides3 show hindered rotation of the enamino- and the amide-group by hydrogen bonds between the nitrogen functions and the ester carbonyl (Z-form). The G values are reported.

     

The unexpected rearrangement of 1,5‐benzodiazepin‐2,4‐dione to a benzimidazol‐2‐one derivative during N,N'‐diglucosylation

Reaction of 1,5‐benzodiazepin‐2,4‐dione with 3‐O‐substituted‐5,6‐anhydro‐1,2‐isopropylidene‐α‐D‐glucofuranose gave the unexpected N,N'‐di‐glucofuranosyl benzimidazol‐2‐one by a novel rearrangement and ring closure reaction. A mechanism is proposed.     

Novel Cyanine Dyes: Synthesis,Characterization and Photosensitization‐Structure Correlation

Novel furo, thieno and pyrrolo[2,3‐b]pyrazole cyanine dyes were synthesized. The structure‐photosensitization properties correlation of the dyes were examined in 95% ethanol solution by absorption spectroscopy. The chemical structure of the starting biheterocyclic compounds and their derived cyanine dyes were confirmed by elemental analysis, IR and ¹H NMR spectroscopy.     

Substitution of phosphine in the complex [RhCl(cyclooctadiene)(phosphine)] by 1-hexene

Summary The substitution of phosphine in the [RhCl(COD)(phosphine)] complex (1), where phosphine is PPh₃ or 1/2 BPS-2 [bis(diphenylphosphinoethyl)tetramethyldisiloxane] and COD is cycloocta-1,5-diene, by 1-hexene is a two-step reversible reaction. All individual rate constants and equilibrium constants were determined spectrophotometrically and associative mechanism occurring via the formation of five-coordinated [RhCl(COD)(phosphine)(1-hexene)] (2) was inferred. The rate-determining step changes from the first- to the second-one as the concentration of 1-hexene increases. An excess of phosphine shifts the equilibrium towards complex (2).     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

An alternative synthesis of 2-(N-arylhydrazono)-1-benzothiophen-3-ones

In the presence of triethylamine, 2-mercaptobenzoic acid readily adds onto acylhydrazonoyl chlorides (1a-c) (precursors of the reactive nitrile imine 1,3-dipolar species) to afford good yields of the corresponding 2-[(2-oxo-1-arylhydrazonopropan-1-yl)mercapto]benzoic acids (2a-c). The latter acyclic adducts, in THF in the presence of 1,1'-carbonyldiimidazole, undergo intramolecular cyclization involving the activated carboxy and the enol functionality to deliver the respective 2-(N-arylhydrazono)-3-oxobenzothiophenes (3a-c). In the solid state, the latter compounds adopt the (Z)-geometry around the C=N double bond as evidenced by single crystal X-ray structure determination for 3b.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

Square-wave adsorptive stripping voltammetry of menadione (vitamin K(3))

Menadione (vitamin K₃) undergoes a reversible two-electron transfer involving the quinone structure in acidic medium. As demonstrated by using cyclic voltammetry, the reduced form is more strongly adsorbed than the oxidized one. Stripping voltammetry of an adsorbed layer has been applied to the determination of this molecule after preconcentration of the reduced compound and scanning the potential towards less negative values. Adsorption, which is highly effective when stirring is used, approaches an equilibrium process in quiescent solution, as evidenced by a loss of part of the adsorbed material when stirring is stopped. A square-wave mode has been selected owing to its high sensitivity (the current is 20 times that for the differential pulse mode), but also to its high scan-rate, which minimizes the slow desorption process occurring during the scan. A concentration range from 2 × 10⁻¹⁰ to 5 × 10⁻⁷ M is easily investigated, the detection limit being 1.3 × 10⁻¹⁰ M. The influence of several operational parameters has also been considered.