Structural,optical and electrical properties of undoped and Si-doped AlxGa1−xN thin films on Si (1 1 1) substrate grown by PA-MBE

We have studied the structural properties of undoped and Si-doped Al_xGa_1?xN/GaN/AlN on Si (1 1 1) substrate prepared by plasma-assisted molecular beam epitaxy (PA-MBE) using high-resolution X-ray diffraction (HR-XRD) and atomic force microscopy (AFM). In comparison with undoped AlGaN, the roughness and dislocation density on the surface of the AlGaN layer decrease with Si doping. Full width half maximum (FWHM) of the undoped and Si-doped samples were equal to 0.69° and 0.52°, respectively. This indicates that the Si doping improves the crystalline quality of the Al_xGa_1?xN layer compared with the undoped one. Raman scattering measurement reveals that the optical phonon modes of A₁(LO) and E₂(H) of the AlGaN show a one-mode and two-modes behavior, respectively. The Fourier-transform infrared reflectance (FTIR) investigation confirms the one-mode (two-mode) behavior of the LO (TO) phonon in our samples. This is in good agreement with Raman measurement. Finally, the barrier height (Φ_B) of undoped and Si-doped Al_xGa_1?xN samples was found to be 0.86 and 0.74 eV, respectively.     

Electrochemical behavior of anthraquinone in aqueous solution in presence of a non-ionic surfactant

Cyclic voltammetric behavior of anthraquinone in aqueous medium has been studied in presence of a non-ionic surfactant, Triton X-100 (TX-100) using sodium salt of anthraquinone-2-sulphonic acid (AQS) as the electro-active species. When cathodic potential is applied, the anthraquinone (AQ) group of AQS is reduced to its dianion. In the reverse scan, the oxidation of AQ²⁻ gives AQ. The electrochemical behavior shows a profound influence from the dissolved state of TX-100 in aqueous media. Spectrophotometric results indicate interaction between AQ and TX-100. A CEC (chemical–electrochemical–chemical) mechanism with the electrochemical reaction coupled with preceding interaction of AQS with TX-100 and following protonation reaction of reduced AQ has been proposed.     

Synthesis and solution properties of a pH‐responsive cyclopolymer of zwitterionic ethyl 3‐(N,N‐diallylammonio)propanephosphonate

The zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)propanephosphonate, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide or ammonium persulfate as initiators to afford a polyphosphonobetaine (PPB). The protonation of P(?O)OEtO^– and deprotonation of ? NH⁺ groups in PPB by HCl and NaOH, gave the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The presence of two pH‐responsive functionalities in APP has led to establish the equilibria: APP ? PPB ? CPP, the position of which very much dictates the viscosity behavior of its aqueous solution. The PPB demonstrated “antipolyelectrolyte” viscosity behavior; however, in contrast to many polycarbo‐ and polysulfo‐betaines, it was found to be soluble in salt‐free water as well as in salt‐added solutions. Basicity constant (K₁) of the amine group in APP, as determined by potentiometric technique, were found to be “apparent,” and as such followed the modified Henderson‐Hasselbalch equation. The study demonstrated a correlation between the basicity constants and viscosity values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Kinetics and mechanism of oxidation of phenylhydrazine and P-bromophenylhydrazine by hexacyanoferrate(III) in acidic medium

Kietics of oxidation of phenylhydrazine and p-bromophenylhydrazine by hexacyanoferrate(III) in acidic medium have been studied. The reactions follow similar kinetics, being first order with respect to both hydrazine and exacyanoferrate(III) and inverse first order with respect to the hydrogen ion. Addition of hexacyanoferrate(II) has no retarding effect on the rate of oxidation. The effects of varying ionic strength, dielectric constant, and temperature on the reaction rates have been investigated. A plausible mechanism has been proposed to account for the experimental results. Benzene and bromobenzene have been identified as the oxidation products.     

Novel core-corona hybrid nanomaterials based on the conjugation of amphiphilic polymeric diblocks to the surface of multifunctional nanodiamond anchors

The poor aqueous solubility and the physicochemical instability of many marketed drugs and new chemical entities is one of the most challenging issues in pharmaceutical research and development. Polymeric micelles (PMs) are produced by the self-assembly of polymeric amphiphiles and they represent one of the most extensively investigated nanotechnology platforms for encapsulation, delivery and targeting of hydrophobic drugs. However, a main challenge is preventing their disassembly under extreme dilution in the body fluids, which leads to uncontrolled release of the encapsulated cargo. In this work, we developed an amphiphilic nanomaterial that resembles the core-corona architecture of a PM with superior stability in the body fluids. Specifically, we utilized carboxylated nanodiamonds (cNDs) as particulate anchors to covalently link amphiphilic diblock copolymers consisting of poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) monomethyl ether (PEG) as hydrophobic and hydrophilic components, respectively. We confirmed a successful core-corona nanostructure using various characterization techniques. In addition, TEM revealed the presence of a thin polymeric layer. Then, the cell compatibility was evaluated in Caco2 cell monolayers, an in vitro model of the intestinal epithelium. Finally, the encapsulation of the hydrophobic anti-helmintic drug nitazoxanide was studied. Cargoes as high as 17.5% w/w were achieved and the sustained release of the cargo according to the Korsmeyer-Peppas model demonstrated in vitro. Overall, preliminary results highlight the potential of this novel approach to extend the applicability of PMs in drug delivery.     

Two-dimensional transient dynamic response of orthotropic layered media

In this study, two-dimensional transient dynamic response of orthotropic plane layered media is investigated. The plane multilayered media consist of N different generally orthotropic, homogeneous and linearly elastic layers with different ply angles. In the generally orthotropic layer, representing a ply reinforced by unidirectional fibers with an arbitrary orientation angle, the principal material directions do not coincide with body coordinate axes. The solution is obtained by employing a numerical technique which combines the use of Fourier transform with the method of characteristics. The numerical results are displayed in curves denoting the variations of stress and displacement components with time at different locations. These curves clearly reveal, in wave profiles, the scattering effects caused by the reflections and refractions of waves at the boundaries and at the interfaces of the layers, and also the effects of anisotropy caused by fiber orientation angle. The curves properly predict the sharp variations in the response at the neighborhood of the wave fronts, which shows the power of the numerical technique employed in the study. By suitably adjusting the elastic constants, the results for multilayered media with transversely isotropic layers, or layers with cubic symmetry, or isotropic layers can easily be obtained from the general formulation. Furthermore, solutions for some special cases, including Lamb’s problem for an elastic half-space, are obtained and compared with the available solutions in the literature and very good agreement is found. Preliminary version presented at the Second International Congress on Mechatronics (MECH2K3), Graz, Austria, July 14-17, 2003.     

Sequential three-component reactions: synthesis, regioselectivity and application of functionalized dihydropyridines (DHPs) for the creation of fused naphthyridines

Facile and efficient synthesis of tetrasubstituted 1,4- and 1,6-dihydropyridines (DHPs) has been achieved by employing three-component domino reaction using dimethyl acetylenedicarboxylate (DMAD), aliphatic amines, and α,β-unsaturated aldehyde in the presence of 30 mol % trifluoroacetic acid. Interestingly, regioselectivity for the synthesis of 1,4-dihydropyridines can be increased by using 30 mol % triflic acid. In addition, the synthesis of fused-naphthyridine derivatives has been accomplished involving imino-Diels-Alder reaction by employing 1,4-dihydropyridines, aromatic aldehydes, and aromatic amines.     

One-pot three-component reaction for the synthesis of pyran annulated heterocyclic compounds using DMAP as a catalyst

The one-pot three-component reaction for the synthesis of pyran annulated heterocycles is reported by condensing aromatic aldehydes, ethyl cyanoacetate, or malononitrile and C-H activated acidic compounds in the presence of catalytic amount of 4-(dimethylamino)pyridine (DMAP) in ethanol under reflux conditions. The significant features of the present protocol are simple, environmentally benign, high yields, non-aqueous work-up procedure, no chromatographic separation and recyclability of the catalyst.