Enzymatic inhibitory activity of Ficus deltoidea leaf extract on matrix metalloproteinase-2, 8 and 9

Dysregulation of matrix metalloproteinases (MMPs) activity is known in many pathological conditions with which most of the conditions are related to elevate MMPs activities. Ficus deltoidea (FD) is a plant known for its therapeutic properties. In order to evaluate the therapeutic potential of FD leaf extract, we study the enzymatic inhibition properties of FD leaf extract and its major bioactive compounds (vitexin and isovitexin) on a panel of MMPs (MMP-2, MMP-8 and MMP-9) using experimental and computational approaches. FD leaf extract and its major bioactive compounds showed pronounced inhibition activity towards the MMPs tested. Computational docking analysis revealed that vitexin and isovitexin bind to the active site of the three tested MMPs. We also evaluated the cytotoxicity and cell migration inhibition activity of FD leaf extract in the endothelial EA.hy 926 cell line. Conclusively, this study provided additional information on the potential of FD leaf extract for therapeutical application.     

Transition metal complexes derived from N-isonicotinamido-N′-benzoylthiocarbamide (H2IBTC)

Summary The synthesis and characterization of Cr^III, Mn^II, Fe^III, Co^II, Ni^II, Cu^II, Zn^II, Cd^II and UO _inf2 ^sup2+ complexes of N-isonicotinamido-_N-benzoylthiocarbamide (H₂IBTC) are reported. I.r. spectral data show that the ligand behaves in a bidentate, tridentate and/or tetradentate manner. Different stereochemistries are proposed for Cr^III, Mn^II, Fe^III, Co^II, Ni^II and Cu^II complexes on the basis of spectral and magnetic studies. The i.r. data indicate that the carbonyl oxygen of the benzoyl moiety is the backbone of chelation in most complexes.     

Study of ion beam induced mixing in Sn/Si system using electrical resistivity measurements

The ion-beam mixing of Sn thin film evaporated on silicon has been investigated by continuously measuring the electrical resistivity of the sample during irradiation by Kr ions. The resistivity results exhibit a tendency toward a saturation process and allow the determination of the critical dose corresponding to the total mixing condition. The variation of the volume fraction of intermixed atoms as a function of the ion dose has been deduced and compared with a semiempirical formula to explain the observed mixing kinetics. A linear dependence of the volume fraction of the intermixed atoms on the fluence is observed, which is a signature of recoil type mixing.     

A Validated LC Method for the Quantitation of Cefotaxime in pH-Sensitive Nanoparticles

A sensitive and rapid routine LC method was validated for measuring cefotaxime incorporated in three different pH-sensitive nanoparticles. The drug was chromatographed on a C18 reversed-phase column; the mobile phase used was 0.05 M aqueous ammonium acetate, acetonitrile and tetrahydrofuran (87:11:2, v/v) adjusted to pH 5.5 with acetic acid. The flow rate was 1 mL min^?1 and cefotaxime was quantified at 254 nm, with a sensitivity range of 0.005 AUFS. The validated method was specific, linear (R ² ≥ 0.999), precise and accurate in a concentration range of 0.2–50.0 μg mL^?1. The method was rapid, selective and suitable for evaluation of cefotaxime in pH-sensitive Eudragit nanoparticles.     

Selective separation of gold from iron ore samples using ion exchange resin

Gold in iron ore samples is separated from iron (major matrix cation), antimony and vanadium using anion exchange resin in (0.2 M) HBr, potassium peroxodisulfate and acetone:water:nitric acid media. The exchangeable anion Cl⁻ of the ion exchanger Dowex 1X 4 is replaced by Br⁻ using (6 M) HBr solution. Certified reference material DGP-M1, spiked ferric magnetic oxide, gold radioactive tracer ¹⁹⁸Au and gold standard solutions are used to study the adsorption efficiency and the yield recovery of tetrabromoaurate AuBr₄⁻ from the resin. Ten eluents have been tried to elute gold from the column, and it has been found that a 10 ml potassium peroxodisulfate and 240 ml acetone:water:nitric acid [125:5:5] solution fulfills the objective. The set up of the separation procedure allows quantitative adsorption of gold by the resin, while the major matrix cation (Fe) and others (Cd, Ag, Cu, V, Sb, Ti) have been passed through the column with the feeding solution (0.2 M) HBr. The resin selectivity coefficient (K) of separating Au from Fe has been found to be K_Fe^Au≈6.4×10¹¹. The eluted Au is treated with K₂S₂O₈ and H₂O₂ for spectrophotometric determination as rhodamine-B complex at 555.6 nm. The linearity, detection limit, precision, and accuracy of the determination method have been found to be up to 2.0 μg g⁻¹, 0.018 μg g⁻¹, 0.009 μg g⁻¹ and 3%, respectively.     

Effect of organic dye on the performance of dye-sensitized solar cell utilizing TiO2 nanostructure films synthesized via CTAB-assisted liquid phase deposition technique

This work is concerned with the growth of TiO₂ nanostructures as photovoltaic materials of dyesensitized solar cell (DSSC) via phase liquid deposition technique treated with CTAB surfactant. This work investigates the influence of organic dyes, N719, N3 and Z907 as photosensitizer on the photovoltaic parameters of TiO₂ nanostructures dye-sensitized solar cells (DSSCs). It also highlights the effect of the concentration of the best dye, N719 on the performance of the cell. The platinum films as counter electrode of the DSSC were prepared by sputtering platinum pellet on ITO substrate. The redox couple of the electrolyte utilized in the DSSC was iodide/triiodide. The cell sensitized with N719 dye demonstrated the best performance compared with the cell sensitized with another two dyes, N3 and Z907. This is due to N719 dye possess the highest optical absorption in visible region. The cell sensitized with 0.8 mM N719 dye performs the highest short-circuit current density, J _sc and power conversion efficiency, η since it posses the highest absorption in visible region. The DSSC utilizing 0.8 mM N719 dye demonstrated the highest J _sc and η of 6.48 mA cm^?2 and 1.69%, respectively.     

Iron(II)‐ and Cobalt(II) Complexes with Tridentate Bis(imino)pyridine Nitrogen Ligands Bearing Chiral Bulky Aliphatic and Aromatic Substituents: Crystal Structure of [CoCl2{2, 6‐bis[R‐(+)‐(bornylimino)methyl]pyridine}]

Iron(II) and cobalt(II) complexes ( 7 ‐ 15 ) based on new aldimine 2, 6‐bis[(imino)methyl]pyridine ( 1 , 2 , 4 , 6 ) and ketimine (2, 6‐bis[(imino)ethyl]pyridine ( 3 , 5 ) ligands with bulky chiral aliphatic or aromatic terminal groups have been prepared and characterized by ¹H NMR, ¹³C NMR, IR‐, mass spectroscopy (EI), and elemental analysis. The complex [CoCl₂(BBoMP)]·¹/₂ CHCl₃ ( 13 ) (BBoMP: 2, 6‐bis{(R‐(+)‐(bornylimino)‐methyl}pyridine) crystallizes in monoclinic space group P2₁ with cell dimensions: a = 7.6603(11) Å, b = 28.3153(14) Å, c = 13.537(2) Å, V = 2908.1(6) ų, Z = 4. The coordination sphere around Co is distorted trigonal bipyramidal.     

Direct Amination and Synthesis of Fused N‐Substituted Isothiochromene Derivatives

Isothiochromene[3,4‐d] pyrimidine derivatives 2 , 3 , and 4a , b were synthesized from the reaction of 3‐amino‐1‐(pyridin‐4‐yl)‐5‐(pyridin‐4‐ylmethylene)‐5,6,7,8‐tetrahydro‐1H‐isothiochromene‐4‐carbonitrile 1 with acetic anhydride, formamide, urea, or thiourea in appropriate experimental conditions. Combination of 1 with carbon acid derivatives afforded isothiochromene [3,4‐b]pyridine 6 – 8 in good yield. A simple approach for N‐substituted fused isothiochromene derivatives has been explored. A POCl₃‐mediated direct amination of isothiochromene amide 2 with NH₂‐heterocycles, secondary amines, and carbohydrazides is described and compared with classical method, yielding 10 – 14 . The structures of the newly synthesized compounds were elucidated on the basis of elemental analysis, and spectral data.     

Synthesis of 5-Substituted 1,3-Dimethylpyrazolo[4,3-<Emphasis Type="Italic">e</Emphasis>][1,2,4]triazines

Summary.  A novel method for the synthesis of a new series of 5-substituted 1,3-dimethyl pyrazolo[4,3-e][1,2,4]triazines is described. The new synthetic strategy is based on the classical Bischler 1,2,4-benzotriazine synthesis. This approach involves the preparation of 5-hydrazinopyrazole from 5-chloro-1,3-dimethyl-4-nitropyrazole followed by acylation and nitro group reduction to form the corresponding 4-amino-3-(acylhydrazino)pyrazoles. Intramolecular oxidative cyclization of the latter derivatives, using polyphosphoric acid, produced the respective target pyrazolotriazines.     

New Zn(II) complexes based on biologically active substituted acetic acid and nitrogen donor ligands: synthesis,crystal structure and biological applications

The complexes [Zn(phenylacetato)₂(2-aminopyridin)₂] (3), [Zn(phenylacetato)₂(1,10-phenanthroline)]·H₂O (4), and [Zn(phenylacetato)₂(2,9-dimethyl-1,10-phenanthroline)]·0.5 H₂O (5) were prepared and characterized by IR-, UV–Visible, ¹H and ¹³C NMR spectroscopy, and single crystal X-ray diffraction. BNPP hydrolysis of the complexes and their parent nitrogen ligands showed that the hydrolysis rate of bis-(4-nitrophenyl) phosphate (BNPP) was 1.7 × 10⁵ L mol^?1 s^?1 for 3, 3.1 × 10⁵ L mol^?1 s^?1 for 4 and 4.3 × 10⁴ L mol^?1 s^?1 for 5. Antibacterial activities show the effect of complexation on activity against Gram-positive (S. epidermidis, S. aureus, E. faecalis, M. luteus and B. subtilis) and Gram-negative (K. pneumonia, E. coli, P. mirabilis and P. aeruginosa) bacteria using the agar well diffusion method. Complex 4 showed good activity against G? bacteria except P. aeruginosa, and against G+ bacteria except E. ferabis. Complex 5 showed no activity against G? bacteria, low activity against M. luteus and B. subtilis bacteria and high activity against S. epidemidis and S. aureus. Complex 3 did not show any activity against G? or G+ bacteria.