Conformational analysis—II: A lanthanide-induced shift nmr and theoretical study of bicyclo [3.1.0] hexan-3-one and adamantanone

The solution conformation of bicyclo [3.1.0] hexan-3-one has been obtained by the use of the shifts induced in its ¹H and ¹³C NMR by Yb(fod)₃. Refinement of the angle of pucker, ∝, of the 5-membered ring indicates that the molecule adopts a flattened boat conformation with ∝ = 195°. This prediction is supported by ab initio, STO-3G, calculations on the isolated molecule. Use of a two- or four-site model for lanthanide-substrate complexing adequately reproduces the experimental data whereas a one-site binding model is unsatisfactory. The importance of multi-site binding is further emphasised by results for the C_2v-symmetric ketone, adamantanone, where only a four-site model gives satisfactory agreement between observed and calculated lanthanide-induced shifts.     

The formation of propylene fumarate oligomers for use in bioerodible bone cement composites

Poly(propylene fumarate) (PPF) oligomers were synthesized by step polymerization using bis(2-hydroxypropyl fumarate) or propylene bis(hydrogen maleate) as starting materials. Oligomers possessing identical degrees of polymerization (DP), but varying in their end group character (either hydroxyl or carboxyl) were first prepared and characterized, then used as part of a bone cement preparation consisting of oligomer, tricalcium phosphate, calcium carbonate, and methyl methacrylate. Compressive strength of the resulting composite appeared to be dependent on both the degree of polymerization of the PPF, and the nature of the oligomers' end groups.     

Synthesis, characterization, and substitution chemistry of [Bu4N]2[W6Cl8(OSO2CF3)6]. A versatile precursor for axially substituted clusters containing the (W6Cl8)4+ core

The new cluster [Bu4N]2[W6Cl8(OSO2CF3)6] (1) has been prepared and structurally characterized. This material is an effective precursor for the generation of cluster ions with the general formula [W6C18L6]n (L = Cl-, Br-, I-, NCS-, NCO-, NCSe-, and O=PPh3; n = 2- or 4+). The last three clusters are new. The products have been characterized by IR spectroscopy, NMR spectroscopy, and FAB mass spectrometry. In addition to 1, the products [Bu4N]2[W6C18(NCS)6] (5) and [Bu4N]2[W6C18(NCO)6] (7) were structurally characterized. Crystal data for 1: space group, P2(1/c) (No. 14); a = 11.116(5) A; b = 27.952(1) A; c = 24.516(1) A; beta = 95.182(9) degrees; V = 7586.3(5) A3; Z = 4. Crystal data for 5: space group, P2(1/n) (No. 14); a = 11.3323(9) A; b = 12.3404(9) A; c = 44.583(3) A; beta = 97.089(1) degrees ; V = 6187.1(7) A3; Z = 4. Crystal data for 7: space group, P1 (No. 2); a = 11.8009(8) A; b = 11.9332(8) A; c = 11.9522(8) A; alpha = 77.904(1) degrees; beta = 95.182(9) degrees; gamma = 62.574(1) degrees V = 1450.5(2) A3; Z = 1.     

Micromethod for the analysis of the four commonly used antiepileptic drugs using a jet tube column

We describe a simple method for the determination of phenobarbital, diphenylhydantoin, carbamazepine, and primidone in serum, by use of gas-liquid chromatography with temperature programming. The methylated derivatives of these anticonvulsants were well resolved, as was 5-(p-methylphenyl)-5-phenylhydantoin, the internal standard. In this procedure we used the jet tube for separation of the drug from the serum. The proposed procedure requires only 100 μl of serum and can be done in less than 30 min. The lower limit of detection for each of the drugs is 0.5 mg/liter. Analytical recoveries of drug from serum were excellent and peak height and concentration were linearly related up to twice the toxic concentration for serum.     

High electron mobility in solution-cast and vapor-deposited phenacyl-quaterthiophene-based field-effect transistors: toward N-type polythiophenes

New carbonyl-functionalized quaterthiophenes, 5,5' '-diperfluorophenylcarbonyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DFCO-4T], 5,5' '-diphenyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DPCO-4T], and a polymer having the same basic motif as DFCO-4T, poly{1,4-bis[(3'-n-octyl-2,2'-dithiophene)carbonyl]-2,3,5,6-tetrafluorobenzene} [P(COFCO-4T)], have been synthesized, characterized, and the crystal structures of the molecules determined. Field-effect transistors fabricated with vapor-deposited and solution-cast films of DFCO-4T exhibit very high Ion:Ioff current ratios (up to 108) and electron mobilities up to approximately 0.51 and approximately 0.25 cm2.V-1.s-1, respectively. Solution-cast blends of P(COFCO-4T) and DFCO-4T (1:1 weight ratio) exhibit an electron mobility of approximately 0.01 cm2.V-1.s-1 (Ion:Ioff = 104).     

An anionic nucleophilic catalyst system for the diastereoselective synthesis of trans-beta-lactams

Trans-disubstituted beta-lactams show increasing utility and prominence in numerous pharmaceutical applications, making their asymmetric synthesis an attractive goal for chemists. We introduce an anionic, nucleophilic catalyst system that provides an efficient, diastereoselective route to trans-disubstituted beta-lactams, a complement to our previously described catalytic methodology for generating the corresponding cis diastereomers. This catalytic, "switch mechanism" process allows for flexibility in the stereoselective synthesis of beta-lactams, producing either cis or trans products as desired from the same substrates. [reaction: see text]     

Characterization of the new Bi∼6.2Cu∼6.2O8(PO4)5 oxyphosphate; a disordered compound containing 2- and 3-O(Bi, Cu)4 tetrahedra—wide polycationic ribbons

The present work is dedicated to the XRD, ED and HREM characterization of a new bismuth copper oxyphosphate Bi_∼6.2Cu_∼6.2O₈(PO₄)₅ (a=11.599(2)Å, , c=37.541(5)Å, R₁=0.0755, Rw₂₌0.174, G.S Pn2₁a). The relatively long size of its c parameter is due to the arrangement along this direction of two kinds of ribbon-like polycations formed by edge sharing O(Bi, Cu)₄ tetrahedra. The existence of such cations is characterized by the b∼5.2 Å value intrinsic to the ribbons structure and commonly found in bismuth oxyphosphate materials. In the title compound, 2-tetrahedra wide [Bi_∼2.4Cu_∼3.6O₄]^6.4+ and 3-tetrahedra wide [Bi_∼5Cu_∼3O₆]⁹⁺ ribbons are isolated by phosphate groups and alternate along c. The interstitial site created between two different sizes ribbons is occupied by Cu²⁺ cations disordered over several close crystallographic sites. The mixed Bi³⁺/Cu²⁺ nature of certain edge-of-ribbons positions induces a disorder over several configurations of the phosphate groups. The concerned oxygen atoms form the environment of the disordered interstitial Cu²⁺ cations which occupy tunnels formed by the phosphate anions. The high-resolution electron microscope study enables a precise correlation between the observed images and the refined crystal structure, evidencing the polycations visualization. Furthermore, this material being the second example of partially disordered compound similar chemical system, some topological rules can be deduced. The b-axis doubling was observed by ED and HREM and is assigned to the ordering of interstitial Cu²⁺ within tunnels cations. A partial intra-tunnel ordering was also observed.     

Heats of solution of 1∶1 electrolytes in 1-propanol,and derived enthalpies of transfer from water

Heats of solution of 13 11 electrolytes in 1-propanol have been determined calorimetrically at various electrolyte concentrations, and extrapolated to zero concentration to give H _s ^o values for these electrolytes. Together with literature data on three additional 11 electrolytes, these measurements yield a self-consistent set of single-ion enthalpies of transfer from water to 1-propanol. Values are tabulated for 10 univalent cations and five univalent anions. It is shown that the H _t ^o (Ph ₄ As⁺)=H _t ^o (Ph ₄ B^–) assumption yields chemically reasonable single-ion values. Using this assumption, it may be deduced that all the univalent ions studied have about the same enthalpy in 1-propanol as in methanol.     

Preparation and characterization of n-alkanoic acid self-assembled monolayers adsorbed on 316L stainless steel

The electrochemical formation and characterization of decanoic, myristic, palmitic, and stearic acid self-assembled monolayers on a native oxide surface of 316L stainless steel have been studied. This work describes a new approach to surface modification of stainless steel in which the self-assembly of n-alkanoic acids is facilitated by applying a potential to the stainless steel in an organic electrolyte solution. While decanoic acid forms a disorganized monolayer as a result of sweeping the potential in an acetonitrile solution containing 0.1 mM of the respective acid, longer acids, that is, myristic and palmitic acids, form highly ordered closed-packed monolayers. This electrochemical approach results in highly reproducible monolayers that are deposited within a shorter time than the traditional assembly process. The monolayers were characterized by cyclic voltammetry, double-layer capacity (ac voltammetry), contact angle measurements, X-ray photoelectron spectroscopy, and external reflection-absorption Fourier transform infrared spectroscopy. The utilization and implications of this modification technique are discussed.     

Electron transfer from dibenzo[b,f]-1-azapentalene dianion: Attempted synthesis of dibenzo[b,f]-1-azapentalene

When dibenzo[b,f]-1-azapentalene dianion (3) was allowed to react with either iron (III) chloride or ethylene bromide, a one-electron transfer from3 took place readily to give the radical anion11. Further electron transfer from11 did not occur presumably due to the antiaromatic character of dibenzo[b,f]-1-azapentalene (1) that would have resulted. The radical anion11 underwent further transformation by hydrogen abstraction from the solvent to give 5,10-dihydroindeno[1,2-b]indole (2) and by dimerization to themeso and (R,S) isomers of 5,5,10,10-tetrahydro-10,10-biindeno[1,2-b]indole (4 a and4 b) respectively.

---

Elektronentransfer von Dibenzo[b,f]-1-azapentalen-Dianion: Ein Versuch zur Synthese von Dibenzo[b,f]-1-azapentalen

Zusammenfassung Die Reaktion von Dibenzo[b,f]-1-azapentalen-Dianion (3) mit Eisen (III) oder Ethylenbromid ergab einen Ein-Elektronentransfer zum Radikalanion11. Ein weiterer Elektronentransfer fand nicht statt, vermutlich wegen des antiaromatischen Charakters von Dibenzo[b,f]-1-azapentalen (1), das dabei entstehen müßte. Das Radikalanion11 ergab unter Wasserstoffentzug aus dem Lösungsmittel 5,10-Dihydroindeno[1,2-b]indol (2), das weiter zummeso- bzw. (R,S)-5,5,10,10-tetrahydro-10,10-biindeno[1,2-b]indol (4 a bzw.4 b) dimerisierte.