The formation of propylene fumarate oligomers for use in bioerodible bone cement composites

Poly(propylene fumarate) (PPF) oligomers were synthesized by step polymerization using bis(2-hydroxypropyl fumarate) or propylene bis(hydrogen maleate) as starting materials. Oligomers possessing identical degrees of polymerization (DP), but varying in their end group character (either hydroxyl or carboxyl) were first prepared and characterized, then used as part of a bone cement preparation consisting of oligomer, tricalcium phosphate, calcium carbonate, and methyl methacrylate. Compressive strength of the resulting composite appeared to be dependent on both the degree of polymerization of the PPF, and the nature of the oligomers' end groups.     

Micromethod for the analysis of the four commonly used antiepileptic drugs using a jet tube column

We describe a simple method for the determination of phenobarbital, diphenylhydantoin, carbamazepine, and primidone in serum, by use of gas-liquid chromatography with temperature programming. The methylated derivatives of these anticonvulsants were well resolved, as was 5-(p-methylphenyl)-5-phenylhydantoin, the internal standard. In this procedure we used the jet tube for separation of the drug from the serum. The proposed procedure requires only 100 μl of serum and can be done in less than 30 min. The lower limit of detection for each of the drugs is 0.5 mg/liter. Analytical recoveries of drug from serum were excellent and peak height and concentration were linearly related up to twice the toxic concentration for serum.     

An anionic nucleophilic catalyst system for the diastereoselective synthesis of trans-beta-lactams

Trans-disubstituted beta-lactams show increasing utility and prominence in numerous pharmaceutical applications, making their asymmetric synthesis an attractive goal for chemists. We introduce an anionic, nucleophilic catalyst system that provides an efficient, diastereoselective route to trans-disubstituted beta-lactams, a complement to our previously described catalytic methodology for generating the corresponding cis diastereomers. This catalytic, "switch mechanism" process allows for flexibility in the stereoselective synthesis of beta-lactams, producing either cis or trans products as desired from the same substrates. [reaction: see text]     

Characterization of the new Bi∼6.2Cu∼6.2O8(PO4)5 oxyphosphate; a disordered compound containing 2- and 3-O(Bi, Cu)4 tetrahedra—wide polycationic ribbons

The present work is dedicated to the XRD, ED and HREM characterization of a new bismuth copper oxyphosphate Bi_∼6.2Cu_∼6.2O₈(PO₄)₅ (a=11.599(2)Å, , c=37.541(5)Å, R₁=0.0755, Rw₂₌0.174, G.S Pn2₁a). The relatively long size of its c parameter is due to the arrangement along this direction of two kinds of ribbon-like polycations formed by edge sharing O(Bi, Cu)₄ tetrahedra. The existence of such cations is characterized by the b∼5.2 Å value intrinsic to the ribbons structure and commonly found in bismuth oxyphosphate materials. In the title compound, 2-tetrahedra wide [Bi_∼2.4Cu_∼3.6O₄]^6.4+ and 3-tetrahedra wide [Bi_∼5Cu_∼3O₆]⁹⁺ ribbons are isolated by phosphate groups and alternate along c. The interstitial site created between two different sizes ribbons is occupied by Cu²⁺ cations disordered over several close crystallographic sites. The mixed Bi³⁺/Cu²⁺ nature of certain edge-of-ribbons positions induces a disorder over several configurations of the phosphate groups. The concerned oxygen atoms form the environment of the disordered interstitial Cu²⁺ cations which occupy tunnels formed by the phosphate anions. The high-resolution electron microscope study enables a precise correlation between the observed images and the refined crystal structure, evidencing the polycations visualization. Furthermore, this material being the second example of partially disordered compound similar chemical system, some topological rules can be deduced. The b-axis doubling was observed by ED and HREM and is assigned to the ordering of interstitial Cu²⁺ within tunnels cations. A partial intra-tunnel ordering was also observed.     

Heats of solution of 1∶1 electrolytes in 1-propanol,and derived enthalpies of transfer from water

Heats of solution of 13 11 electrolytes in 1-propanol have been determined calorimetrically at various electrolyte concentrations, and extrapolated to zero concentration to give H _s ^o values for these electrolytes. Together with literature data on three additional 11 electrolytes, these measurements yield a self-consistent set of single-ion enthalpies of transfer from water to 1-propanol. Values are tabulated for 10 univalent cations and five univalent anions. It is shown that the H _t ^o (Ph ₄ As⁺)=H _t ^o (Ph ₄ B^–) assumption yields chemically reasonable single-ion values. Using this assumption, it may be deduced that all the univalent ions studied have about the same enthalpy in 1-propanol as in methanol.     

Preparation and characterization of n-alkanoic acid self-assembled monolayers adsorbed on 316L stainless steel

The electrochemical formation and characterization of decanoic, myristic, palmitic, and stearic acid self-assembled monolayers on a native oxide surface of 316L stainless steel have been studied. This work describes a new approach to surface modification of stainless steel in which the self-assembly of n-alkanoic acids is facilitated by applying a potential to the stainless steel in an organic electrolyte solution. While decanoic acid forms a disorganized monolayer as a result of sweeping the potential in an acetonitrile solution containing 0.1 mM of the respective acid, longer acids, that is, myristic and palmitic acids, form highly ordered closed-packed monolayers. This electrochemical approach results in highly reproducible monolayers that are deposited within a shorter time than the traditional assembly process. The monolayers were characterized by cyclic voltammetry, double-layer capacity (ac voltammetry), contact angle measurements, X-ray photoelectron spectroscopy, and external reflection-absorption Fourier transform infrared spectroscopy. The utilization and implications of this modification technique are discussed.     

Electron transfer from dibenzo[b,f]-1-azapentalene dianion: Attempted synthesis of dibenzo[b,f]-1-azapentalene

When dibenzo[b,f]-1-azapentalene dianion (3) was allowed to react with either iron (III) chloride or ethylene bromide, a one-electron transfer from3 took place readily to give the radical anion11. Further electron transfer from11 did not occur presumably due to the antiaromatic character of dibenzo[b,f]-1-azapentalene (1) that would have resulted. The radical anion11 underwent further transformation by hydrogen abstraction from the solvent to give 5,10-dihydroindeno[1,2-b]indole (2) and by dimerization to themeso and (R,S) isomers of 5,5,10,10-tetrahydro-10,10-biindeno[1,2-b]indole (4 a and4 b) respectively.

---

Elektronentransfer von Dibenzo[b,f]-1-azapentalen-Dianion: Ein Versuch zur Synthese von Dibenzo[b,f]-1-azapentalen

Zusammenfassung Die Reaktion von Dibenzo[b,f]-1-azapentalen-Dianion (3) mit Eisen (III) oder Ethylenbromid ergab einen Ein-Elektronentransfer zum Radikalanion11. Ein weiterer Elektronentransfer fand nicht statt, vermutlich wegen des antiaromatischen Charakters von Dibenzo[b,f]-1-azapentalen (1), das dabei entstehen müßte. Das Radikalanion11 ergab unter Wasserstoffentzug aus dem Lösungsmittel 5,10-Dihydroindeno[1,2-b]indol (2), das weiter zummeso- bzw. (R,S)-5,5,10,10-tetrahydro-10,10-biindeno[1,2-b]indol (4 a bzw.4 b) dimerisierte.

     

An approach to estimate the energy and strength of the intramolecular hydrogen bond in different conformers of 4‐methylamino‐3‐penten‐2‐one

The molecular structure and intramolecular hydrogen bond energy of 32 conformers of 4‐methylamino‐3‐penten‐2‐one were investigated at MP2 and B3LYP levels of theory using the standard 6–31G** basis set and AIM analyses. Furthermore, calculations for all the possible conformations of 4‐methylamino‐3‐penten‐2‐one in water solution were also carried out at B3LYP/6–31G** level of theory. The calculated geometrical parameters and conformational analyses in gas phase and water solution show that the ketoamine conformers of this compound are more stable than the other conformers (i.e., enolimine and ketoimine). This stability is mainly due to the formation of a strong N? H···O intramolecular hydrogen bond, which is assisted by π‐electrons resonance. Hydrogen bond energies for all conformers of 4‐methylamino‐3‐penten‐2‐one were obtained from the related rotamers method. The nature of intramolecular hydrogen bond existing within 4‐methylamino‐3‐penten‐2‐one has been investigated by means of the Bader theory of atoms in molecules, which is based on topological properties of the electron density. The results of these calculations support the results which obtained by related rotamers method. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

A photoactivated diazopyruvoyl cross-linking agent for bonding tissue containing type-I collagen

On the basis of the earlier examples of diazopyruvoyl (DAP) groups reported by Lawton for covalent binding and cross-linking of proteins and oligopeptides and our recent demonstration that a coumaryl diazopyruvamide was used to label Type-I collagen, we have extended our investigations to the synthesis and cross-linking capabilities of a bis-DAP polyethylene glycol to cross-link Type-I collagen. The new photoactivated cross-linking agent, N,N'-bis(3-diazopyruvoyl)-2,2'-(ethylenedioxy)bis(ethylamine) (DPD, 2), has been designed and synthesized specifically to "weld" collagenous tissues by cross-linking Type-I collagen. A working model for the photochemical welding studies of collagenous tissues was developed using gelatin strips (gel strips) composed of denatured Type-I collagen. Gel strips are transparent to near-UV and visible light, uniform in thickness, and have reproducible composition. Furthermore, the availability of nucleophilic amine sites in gel strips was demonstrated by reaction with o-phthalaldehyde, producing a fluorescent derivative of the protein. Gel strips were coated with a solution of DPD in chloroform 7 irradiated at 320-390 nm, and the resulting bonded gel strips were tested for the strength of the weld. The welds were generally brittle and had average tensile strengths that exceeded 100 N/cm2. Welds were not formed in the absence of light or DPD. Scanning electron microscopy studies revealed a pockmarked surface from severed welds. Welds of rabbit Achilles tendon were also obtained using the tethered diazopyruvamide. These welds were much weaker, having an average tensile strength of 11.95 N/cm2 for DPD-2,2'-ethylenedioxy(bis)ethylamine comonomers in the cross-linking reaction. In both studies the welds obtained by this method were significantly stronger than the controls.