Synthesis of 6-Heterocyclically Appended Tri-<Emphasis Type="Italic">O</Emphasis>-methyl Protected 6-Desmethyl Emodin Derivatives

Summary. A convenient synthesis of several 6-heterocyclically appended tri-O-methyl 6-desmethyl emodin derivatives including the tetrazolyl, oxazolyl, oxazolinyl, benzimidazolyl, benzoxazolyl, and benzothiazolyl derivatives of potential biological and medicinal interest was achieved starting from the tri-O-methyl protected emodin aldehyde or nitrile. In addition, these derivatives could serve as synthons for heterocyclic hypericin derivatives.     

Synthesis,characterization and metal chelating properties of silica-physisorbed and chemisorbed-2,5-dioxypiperazine

2,5-Dioxypiperazine (DOPZ) was covalenty bonded as a chelating compound to chloropropyltrimethoxysilane (Si–Cl) for the formation of a new chemisorbed silica [Si–(CH₂)₃–DOPZ]. Physisorbed silica-loaded-2,5-dioxypiperazine [Si–DOPZ] was also synthesized via a physical adsorption approach. Elucidation of the chemisorption and physisorption of 2,5-dioxypiperazine onto silica was confirmed on the basis of 70 eV electron impact mass spectrometric (70 eV EI-MS) mode of ionization via a direct insertion probe (DIP) as a promising technique for providing characteristic fragment ion peaks. The metal probe testing method and elemental analysis were applied to determine the surface coverage values and these were found to be 0.179 and 0.160 mmol g⁻¹ for [Si–(CH₂)₃–DOPZ] and 0.251 mmol g⁻¹ for [Si–DOPZ]. [Si–(CH₂)₃–DOPZ] was characterized by high stability in acidic and buffer solutions, pH 1–7, compared to [Si–DOPZ]. Differential scanning calorimetry studies (DSC) for the modified silica were performed to evaluate the various thermodynamic and kinetic parameters of the thermal degradation processes, and these have been enumerated. The results obtained by both EI-MS and DSC are very similar in many respects. Metal chelation and stoichiometric properties of chemically modified silica were evaluated on the basis of the metal binding capacity, distribution coefficient and separation factor for a series of metal ions. The evaluated results refer to the high metal chelating properties of [Si–(CH₂)₃–DOPZ] for cadmium(II), lead(II) copper(II) and mercury(II). These four [Si–(CH₂)₃–DOPZ]–metal complexes were also synthesized and the identified stoichiometric ratios were found to be 1:2 based on the nitrogen and metal analysis. EI-MS via 70-eV ionization was also used as a potential method for further confirmation of the metal complex formation based on structure and fragmentation elucidation. DSC studies of these four metal complexes were also performed and evaluated.     

Effect of positively charged short peptides on stability of cubic phases of monoolein/dioleoylphosphatidic acid mixtures

To elucidate the stability and phase transition of cubic phases of biomembranes with infinite periodic minimal surface is indispensable from biological and physicochemical aspects. In this report, we investigated the effect of positively charged peptide-3K (LLKKK) and poly(L-lysine) on the phase stability of monoolein (MO) membranes containing negatively charged dioleoylphosphatidic acid (DOPA) (i.e., DOPA/MO membranes) using small-angle X-ray scattering. At first, the effect of peptide-3K on 10% DOPA/90% MO membrane in excess water, which is in the Q229 phase, was investigated. At 3.4 mM peptide-3K, a Q229 to Q230 phase transition occurred, and at >3.4 mM peptide-3K, the membrane was in the Q230 phase. Poly(L-lysine) (M(w) 1K-4K) also induced the Q230 phase, but peptide-2K (LLKK) could not induce it in the same membrane. We also investigated the effect of peptide-3K on the multilamellar vesicle (MLV) of 25% DOPA/75% MO membrane, which is in L(alpha) phase. In the absence of peptide, the spacing of MLV was very large (11.3 nm), but at > or = 8 mM peptide-3K, it greatly decreased to a constant value (5.2 nm), irrespective of the peptide concentration, indicating that peptide-3K and the membranes form an electrostatically stabilized aggregation with low water content. Poly(L-lysine) also decreased greatly the spacing of the 25% DOPA/75% MO MLV, indicating the formation of a similar aggregation. To compare the effects of peptide-3K and poly(L-lysine) with that of osmotic stress on stability of the cubic phase, we investigated the effect of poly(ethylene glycol) with molecular weight 7500 (PEG-6K) on the phase stability of 10% DOPA/90% MO membrane. With an increase in PEG-6K concentration, i.e., with an increase in osmotic stress, the most stable phase changed as follows; Q229 (Schwartz's P surface) --> Q224 (D) --> Q230 (G). On the basis of these results, we discuss the mechanism of the effects of the positively charged short peptides (peptide-3K) and poly(L-lysine) on the structure and phase stability of DOPA/MO membranes.     

Facile regiocontrolled synthesis of trialkyl-substituted pyrazines

[reaction: see text] Alpha-nitro ketones can be transformed selectively into trialkyl-substituted pyrazines via reaction with alpha-amino ketones using octyl viologen as an electron-transfer reagent. The new synthetic method, and the optimal reaction conditions that allow for the regiochemical control, are described.     

Potentiometric determination of silver(I), palladium(II) and gold(III) in mixtures by use of an iodide-selective electrode

Two procedures are proposed for the potentiometric determination of Ag(I), Pd(II) and Au(III) in binary mixtures, by titration with potassium iodide solution, and use of a commercial iodide electrode as sensor. In the first procedure, two aliquots of the mixture are titrated, at pH 2.0 ± 0.2 and 9.0 ± 0.2, adjusted with dilute sulphuric acid and ammonia solution. At pH 2.0, the titrant reacts with both metals, whereas at pH 9.0, Ag(I) is the only reactant. The second procedure utilizes titration of two aliquots of the mixture in the presence and absence of a selective masking agent. The methods have been applied to the determination of these metals in some jewellery alloys.     

Synthesis,spectroscopic characterization and biological evaluation of a novel chemosensor with different metal ions

A novel chemosensor, namely 3‐(4‐chlorophenyl)‐1‐(pyridin‐2‐yl)prop‐2‐en‐1‐one, CPPEO, and its metal complexes have been synthesized and characterized by using sets of chemical and spectroscopic techniques, such as elemental analysis, mass, Fourier transform‐infrared and UV–Vis spectral analysis. The thermal properties of the metal complexes have been investigated by thermogravimetric techniques. The decomposition mechanism of the titled complexes was suggested. The results showed that the Co²⁺ and Mn²⁺ complexes have an octahedral geometry, while Zn²⁺ and Cd²⁺ complexes have tetrahedral geometry. The kinetic and thermodynamic parameters of the thermal decomposition stages have been evaluated using the Coats–Redfern method. The optical sensing response of the investigated chemosensor to the different metal ions was investigated. It responds well to the tested metal ions as reflected from the significant change in both absorption and emission spectra upon adding different concentrations of the metal salts, confirming the intramolecular charge transfer of the chemosensor upon effective coordination with the used metal ions. This leads to enhancing ICT interaction, causing a significant shift in the presence of strongly complexing metal ions. This was fully reversible, where the solution of dye‐metal ion complex was decomplexed by adding an EDTA solution to revert the original spectrum of the dye. The stability constants, K, for the complexes of the investigated chemosensor with the mentioned metal ions were calculated, indicating that Co²⁺ is the most effectively detected, and the potential of the novel dye was highly efficient switchers for Co²⁺ ions. Additionally, the molecular modeling was carried out for the chemosensor and its metal complexes. Finally, the solid complexes have been tested for their in vitro antimicrobial activities against some bacterial strains (Gram +ve and Gram ?ve bacteria), as well as antifungal strains.     

Comprehensive stability‐indicating high‐performance liquid chromatography coupled with diode array detection method for simultaneous determination of amprolium hydrochloride and ethopabate in powder dosage form for veterinary use

This research deals with the development of a stability‐indicating high‐performance liquid chromatography method for simultaneous determination of amprolium hydrochloride and ethopabate. To the best of our knowledge, no comprehensive stability‐indicating method has been reported for analysis of this mixture. Separation was achieved using Kromasil cyano column with gradient elution of the mobile phase composed of sodium hexane sulfonate solution and methanol. Quantification was based on measuring peak areas at 266 nm. Amprolium and ethopabate peaks eluted at retention times 10.42 and 18.53 min, respectively. The proposed procedure was validated with respect to system suitability, linearity, ranges, precision, accuracy, specificity, robustness, detection, and quantification limits. Linearity ranges for amprolium and ethopabate were 1.5–240 and 1–160 μg/mL, respectively. Analytes were subjected to stress conditions of hydrolysis, oxidation and thermal degradation. The proposed method enabled resolution of drugs from their forced‐degradation products and amprolium related substance (2‐picoline). Moreover, specificity was verified by resolution of the analytes from about 22 drugs used in antimicrobial veterinary products. The validated method was successfully applied to assay of the combined veterinary powder dosage form, additionally it was implemented in the accelerated stability study of the dosage form when stored for six months at 40°C and 75% relative humidity.     

Preparation of high molecular weight polybenzoxazine prepolymers containing siloxane unites and properties of their thermosets

High‐molecular‐weight polybenzoxazine prepolymers containing polydimethylsiloane unit in the main‐chain have been synthesized from α,ω‐bis(aminopropyl)polydimethylsiloxane (PDMS) (molecular weight = 248, 850, and 1622) and bisphenol‐A with formaldehyde. Moreover, another type of prepolymers was prepared using methylenedianiline (MDA) as codiamine with PDMS. The weight average molecular weight of the obtained prepolymers was estimated from size exclusion chromatography to be in the range of 8000–11,000. The chemical structures of the prepolymers were investigated by ¹H NMR and IR analyses. The prepolymers gave transparent free standing films by casting their dioxane solution. The prepolymer films after thermally cured up to 240 °C gave brown colored transparent and flexible polybenzoxazine films. Tensile test of the films revealed that the elongation at break increased with increasing the molecular weight of PDMS unit. Dynamic mechanical analysis of the thermosets showed that the T_gs were as high as 238–270 °C. The thermosets also revealed high thermal stability as evidenced by the 5% weight loss temperatures in the range of 324–384 °C from thermogravimetic analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Low temperature deposition of zinc oxide nanoparticles via zinc-rich vapor phase transport and condensation

ZnO nanoparticles as small as 80 nm were successfully synthesized using a modified vapor phase transport (VPT) process at substrate temperatures as low as 222 °C. Particle size distribution and morphology were characterized by scanning electron microscopy and atomic force microscopy. Energy dispersive X-ray spectroscopy and X-ray diffraction indicate the synthesis of high quality crystalline ZnO structures. Low temperature (4.2 K) photoluminescence (PL) spectroscopy was used to characterize the optical quality of the nanoparticles. Ultraviolet emission and a nanostructure specific feature at 3.366 eV are strong in the PL spectra. The 3.366 eV feature is observed to predominate the spectrum with decrease in particle size. This size effect corroborates the luminescence as a nanostructure-specific surface related exciton feature as previously speculated in the literature. In addition, self-assembled ZnO mesoparticles (>100 nm) were realized by increasing the growth time. Low growth temperatures of the particles allow for their potential utilization in flexible organic hybrid optoelectronics. However, this work focuses mainly on the modified synthesis and optical characterization of nanoparticles.     

Electrochemical and Spectroscopic Studies on the Interaction of Gatifloxacin,Moxifloxacin and Sparfloxacin with DNA and Their Analytical Applications

The electrochemical oxidation of the three fluoroquinolone drugs FQs: gatifloxacin GTF, moxifloxacin MXF and sparfloxacin SPF, at the bare and DNA‐modified glassy carbon electrodes has been studied by voltammetric techniques. The three FQs showed one irreversible oxidation peak at potential range 0.85–0.91 V vs. Ag‐AgCl, in phosphate buffer of pH 7.0. Differential pulse voltammetry (DPV) and UV‐absorption spectroscopic techniques were employed to probe the interaction between the FQs and calf thymus double stranded deoxyribonucleic acid (ds CT‐DNA). From electrochemical data, the binding constant between DNA and the gatifloxacin, moxifloxacin and sparfloxacin are calculated to be 3228, 2596 and 2857 M^?1 respectively. Based on electrochemical and spectroscopic results, the mode of binding of fluoroquinolone to DNA through combined effect of intercalation and electrostatic interaction was concluded. A detection scheme based on a preconcentration and differential pulse voltammetric (DPV) determination at dsDNA modified glassy carbon electrode (DNA/GCE) was proposed for the trace determination of the studied analytes. The developed method was successfully applied to the determination of the FQs in pharmaceutical formulations.