Synthesis of novel tricyclic and tetracyclic sultone scaffolds via intramolecular 1,3-dipolar cycloaddition reactions

The initially prepared 2-formylphenyl-(E)-2-phenylethenesulfonates from the condensation of (E)-2-phenylethenesulfonyl chloride with 2-hydroxybenzaldehyde derivatives underwent intramolecular [3+2] cycloaddition with methyl or phenylhydroxylamine, sarcosine, and l-proline, affording the corresponding novel isoxazolidine, pyrrolidine and pyrrolizidine-annulated γ,δ-benzo-δ-sultones, respectively, in good yields. Unambiguous assignment of the molecular structures was carried out by single-crystal X-ray diffraction.     

Pulse electrodeposition of Co1−xZnx nanowire arrays: Magnetic improvement through electrolyte concentration,off-time between pulses and annealing

Using different electrolyte compositions and varying the off-time between pulses, Co_1xZn_x nanowire arrays were fabricated by ac pulse electrodeposition. The effect of deposition parameters on alloy contents was investigated by studying the microstructures and magnetic properties of as-deposited and annealed Co_1xZn_x nanowires. It is shown that Zn content in CoZn nanowires exponentially increases by increasing the zinc ions in the electrolyte. The Zn content initially increases to a maximum by increase in off-time between pulses and then falls off. Adding a certain amount of Zn to Co led to form amorphous CoZn nanowires. A significant increase in magnetization, coercivity and squareness of CoZn nanowires was observed after annealing. The rate of increase in magnetization of annealed samples was seen to be inversely proportional to their initial magnetization. Improvement of magnetic properties of annealed samples may be caused by magnetic cluster formation and pinning effect.     

Preconcentration and determination of ultra-trace amounts of U(VI) and Th(IV) using titan yellow-impregnated Amberlite XAD-7 resin

A simple and sensitive method for the determination of ultra trace amounts of U(VI) and Th(IV) ions by spectrophotometric method after solid-phase extraction on a new extractant-impregnated resin (EIR) has been reported. The new EIR was synthesised by impregnating a weakly polar polymeric adsorbent, Amberlite XAD-7, with titan yellow (TY) as extractant. The analytical method is based on the simultaneous adsorption of analyte ions in a mini-column packed with TY/XAD-7 and performing sequential elution with 0.5% (w/v) Na₂CO₃ for uranium and 2.0 M HCl for thorium. The influences of the analytical parameters including pH, salting out agent and sample volume were investigated. The interference effects of foreign ions on the retention of the analyte ions were also explored. The limits of detection for U(VI) and Th(IV) were as low as 50 and 25 ng L^?1, respectively. Relative standard deviations (n = 7) for U(VI) and Th(IV) were 3.1% and 2.9%, respectively. The method was successfully applied to the determination of ultra trace amounts of U(VI) and Th(IV) in different real matrices including industrial wastewater samples and environmental waters. The proposed method was validated using three certified reference materials and the results were in good agreement with the certified values.     

Structural and Solution Studies of two Mercury(II) Complexes with [1,3‐Bis(2‐ethoxy)benzene]triazene

The reaction of [1,3‐bis(2‐ethoxy)benzene]triazene, [ HL ], with Hg(SCN)₂ and Hg(CH₃COO)₂, resulted in the formation of the complexes [Hg L (SCN)] ( 1 ) and [Hg L ₂] · CH₃OH ( 2 ). They were characterized by means of X‐ray crystallography, CHN analysis, FT‐IR, ¹H NMR, and ¹³C NMR spectroscopy. The structure of compound 1 consists of two independent complexes in which the Hg^II atoms are stacked along the crystallographic a axis to form infinite chains. Each Hg^II atom is chelated by one L ligand and one SCN ligand, whereas in compound 2 , the Hg^II atom is surrounded by two L ligands. In addition, 1D chains formed by metal–π interactions are connected to each other by C–H ··· π stacking interactions in the structure of 1 , which results in a 2D architecture. An interesting feature of compound 2 is the presence of C–H ··· π edge‐to‐face interactions.     

Co(III) complexes of Me-salpn and Me-salbn and the ring size effect on the coordination modes and electrochemical properties: The crystal structures of trans-[Co(Me-salpn)(py)2]PF6 and cis-α-[Co(Me-salbn)(4-Mepy)2]BPh4 · 4-Mepy

The synthesis and characterization of a series of cobalt(III) complexes of the general type [Co(N₂O₂)(L₂)]⁺ are described. The N₂O₂ Schiff base ligands used are Me-salpn (H₂Me-salpn = N,N′-bis(methylsalicylidene)-1,3-propylenediamine) (1–3) and Me-salbn (H₂Me-salbn = N,N′-bis(methylsalicylidene)-1,4-butylenediamine) (4–5). The two ancillary ligands L include: pyridine (py) 1, 3-metheylpyridine (3-Mepy) 2, 1-methylimidazole (1-MeIm) 3, 4-methylpyridine (4-Mepy) 4 and pyridine (py) 5. These complexes have been characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structures of trans-[Co^III(Me-salpn)(py)₂]PF₆, 1, and cis-α-[Co^III(Me-salbn)(4-Mepy)₂]BPh₄ · 4-Mepy, 4, have been determined by X-ray diffraction. Examination of the solution and crystalline structures revealed that the outer coordination sphere of the complexes exerts a noticeable influence on the inner coordination sphere of the Co(III) ion. The electrochemical reduction of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Co^III–Co^II is electrochemically irreversible, which is accompanied by the dissociation of the axial (R-py)–cobalt bonds. It has also been observed that the Co(III) state is stabilized with increasing the flexibility of the ligand environment.     

Degradation kinetics of electron beam irradiated poly(propylene-co-ethylene) heterophasic copolymer

This study considers the effects of electron beam radiation on degradation kinetics of a poly(propylene-co-ethylene) heterophasic copolymer. Polypropylene heterophasic copolymers are composed of ethylene–propylene rubbery phase dispersed in crystalline polypropylene homopolymer matrix. Electron beam radiation can affect both polypropylene homopolymer matrix and ethylene–propylene dispersed phases simultaneously. Both phases undergo degradation and crosslinking reactions, but degradation is more probable in the polypropylene homopolymer matrix. The aim of this work is to study kinetics of degradation in this material. A high power electron accelerator irradiated raw samples under nitrogen atmosphere. The samples are analyzed using TGA in non-isothermal mode, and the degradation kinetic parameters were determined using Kissinger, Flynn–Wall–Ozawa and Coats–Redfern methods. The kinetic parameters resulted from these methods are compared. Results of kinetics studies show that orders of degradation reactions occurring in nitrogen atmosphere are all less than one. It indicates degradation takes place due to thermal dissociation of the chemical bonds.     

Synthesis,Characterization and Fluorescence Properties of Novel Porous Fe/ZnO Nano-Hybrid Assemblies by Using Berberis thunbergii Extract

Journal of Fluorescence - In this work, novel Fe/ZnO nanocomposites (NCs) and Fe nanoparticles loaded onto porous ZnO nanostructures have been synthesized via a simple biotechnological route by...     

Synthesis and characterization of ultrafine γ-Al2O3:Cr nanoparticles and their performance in antibacterial activity

Journal of Sol-Gel Science and Technology - Preventing the growth of potentially deadly bacteria by newly synthesized nanoparticles (NPs) is of great importance in the development of future drugs....     

Synthesis,crystal structures and antibacterial studies of oxidovanadium(IV) complexes of salen-type Schiff base ligands derived from meso-1,2-diphenyl-1,2-ethylenediamine

A series of new derivatives and previously reported Schiff base ligands and their oxidovanadium(IV) complexes were synthesized, characterized and tested as potential antibacterial agents against four human pathogenic bacteria. These N₂O₂ type Schiff base ligands were derived from the condensation of meso-1,2-diphenyl-1,2-ethylenediamine with different salicylaldehyde derivatives, and their metal complexes were obtained from the reaction of these ligands with bis(acetylacetonato)oxidovanadium(IV). Our studies showed that the metal complexes had moderate antibacterial activity, and this activity was higher than that of the free ligands against both Gram-positive and Gram-negative bacteria. Besides, it was found that the presence of more substituents on the ligands increases the antibacterial activities of both the free ligands and their complexes. The crystal structures of H₂L⁴ and its corresponding complex VOL⁴ were determined by X-ray crystallography.