A polyaniline-containing filter paper that acts as a sensor, acid, base, and endpoint indicator and also filters acids and bases

In this paper we report a new idea for synthesizing polyaniline in an ordinary filter paper. The synthesis was carried out by a process in which aqueous acidic aniline solution and the oxidizing agent H(2)O(2) was added to the paper drop by drop and in sequence. Uniform polymerization could be obtained with the addition of reagents in either sequence. The polymer formation led to a green coloration of the paper. Formation of the emeraldine salt of polyaniline was confirmed by UV-vis and FTIR spectroscopy. Scanning electron microscopic measurements were made for surface characterization of the polymer formed in the paper. The same paper was used as a sensor for ammonia in vapor and in solution, for acid and base as well as endpoint indication, and also to filter acids and bases. We found that, using the polymer-containing paper, ammonia concentrations in a solution as low as 14 ppm could be measured.     

Das Hexagallan [Ga6{SiMe(SiMe3)2}6] und das closo‐Hexagallanat [Ga6{Si(CMe3)3}4(CH2C6H5)2]2— — der Übergang zu einem ungewöhnlichen precloso‐Cluster

The Hexagallane [Ga₆{SiMe(SiMe₃)₂}₆] and the closo‐Hexagallanate [Ga₆{Si(CMe₃)₃}₄ (CH₂C₆H₅)₂]^2— — the Transition to an Unusual precloso‐Cluster The closo hexagallanate [Ga₆R₄(CH₂Ph)₂]^2— (R = Si^tBu₃) as well as the hexagallane Ga₆R₆ (R = SiMe(SiMe₃)₂) with only six cluster electron pairs were isolated from reactions of “GaI” with the corresponding silanides. The structure of the latter is derived from an octahedron by a Jahn‐Teller‐distortion and is different from the capped trigonal bipyramidal one expected by the Wade‐Mingos rules. Both compounds were characterized by X‐ray crystallography. The bonding is discussed with simplified Ga₆H₆ and Ga₆H₆^2— models via DFT methods.     

Model Compounds for Iron Proteins. Structures and Magnetic, Spectroscopic, and Redox Properties of Fe(III)M(II) and [Co(III)Fe(III)](2)O Complexes with (&mgr;-Carboxylato)bis(&mgr;-phenoxo)dimetalate and (&mgr;-Oxo)diiron(III) Cores

A series of heterobimetallic complexes of the type [Fe(III)M(II)L(&mgr;-OAc)(OAc)(H(2)O)](ClO(4)).nH(2)O (2-5) and [{Fe(III)Co(III)L(&mgr;-OAc)(OAc)}(2)(&mgr;-O)](ClO(4))(2).3H(2)O (6) where H(2)L is a tetraaminodiphenol macrocyclic ligand and M(II) = Zn(2), Ni(3), Co(4), and Mn(5) have been synthesized and characterized. The (1)H NMR spectrum of 6 exhibits all the resonances between 1 and 12 ppm. The IR and UV-vis spectra of 2-5 indicate that in all the cases the metal ions have similar coordination environments. A disordered crystal structure determined for 3 reveals the presence of a (&mgr;-acetate)bis(&mgr;-phenoxide)-Ni(II)Fe(III) core, in which the two metal ions have 6-fold coordination geometry and each have two amino nitrogens and two phenolate oxygens as the in-plane donors; aside from the axial bridging acetate, the sixth coordination site of nickel(II) is occupied by the unidentate acetate and that of iron(III) by a water molecule. The crystal structure determination of 6 shows that the two heterobinuclear Co(III)Fe(III) units are bound by an Fe-O-Fe linkage. 6 crystallizes in the orthorhombic space group Ibca with a = 17.577(4) ?, b = 27.282(7) ?, c = 28.647(6) ?, and Z = 8. The two iron(III) centers in 6 are strongly antiferromagnetically coupled, J = -100 cm(-1) (H = -2JS(1).S(2)), whereas the other two S(1) = S(2) = (5)/(2) systems, viz. [Fe(2)(III)(HL)(2)(&mgr;-OH)(2)](ClO(4))(2) (1) and the Fe(III)Mn(II) complex (5), exhibit weak antiferromagnetic exchange coupling with J = -4.5 cm(-1) (1) and -1.8 cm(-1) (5). The Fe(III)Ni(II) (3) and Fe(III)Co(II) (4) systems, however, exhibit weak ferromagnetic behavior with J = 1.7 cm(-1) (3) and 4.2 cm(-1) (4). The iron(III) center in 2-5 exhibits quasi-reversible redox behavior between -0.44 and -0.48 V vs Ag/AgCl associated with reduction to iron(II). The oxidation of cobalt(II) in 4 occurs quasi-reversibly at 0.74 V, while both nickel(II) and manganese(II) in 3 and 5 undergo irreversible oxidation at 0.85 V. The electrochemical reduction of 6 leads to the generation of 4.     

Spectrofluorimetric determination of molybdenum in some real and environmental samples

A very simple, highly-sensitive and selective quenchofluorimetric method for the rapid determination of molybdenum(VI) in aqueous media is described. The method is based on the instantaneous quenching action by the metal-ion upon the native fluorescence of bathophenanthrolinedisulphonate (4,7-diphenyl-1,10-phenanthrolinedisulphonate) solution [lambda(ex) (max) 288 nm; lambda(em) (max) 444.8 nm] in the optimum pH-range of 3.0-3.7 at room temperature (25 +/- 5 degrees ). The fluorescence quenching is co-linear in the range of 0.01-1.0 ppm molybdenum. Large excesses of over 50 cations, anions and some common complexing agents were found to have no interference. Cu, Ni, Co, Fe and V can be tolerated only up to the corresponding amount of molybdenum. Interference from greater amounts can however be removed by a one-step ion-exchange separation process. The developed method was successfully tested over several standard alloys, synthetic mixtures of various compositions, factory effluents and in spiked environmental waters.     

Adsorption of several tracer cations and separation of234Th from238U and113mIn from113Sn on tin dioxide

The uptake of 22 cations at tracer concentrations has been studied over hydrous tin dioxide exchanger material. A granular variety of tin dioxide was prepared from the reaction of tin(IV) chloride with NaOH solution, and the formula of the material was ascertained to be SnO₂·1.7 H₂O. Radiochemical separation of carrier-free²³⁴Th from²³⁸U and^113mIn from¹¹³Sn was achieved over a tin dioxide column. The separated products were of high radionuclidic purity. The overall separation procedures are very simple and quick with quantitative yield.     

Simple methods for the direct assembly, functionalization, and patterning of acid-terminated monolayers on Si111

This article describes mild methods to directly assemble, functionalize, and pattern monolayers of undecylenic acid on hydrogen-terminated Si(111). These monolayers were assembled under very mild conditions from a neat solution of undecylenic acid containing 0.1 mol % 4-(decanoate)-2,2,6,6-tetramethylpiperidinooxy at room temperature without the need for UV light. Because of these mild conditions, monolayers exposing carboxylic acids could be assembled in one step without the need to protect the acid prior to its assembly. The monolayers were extensively characterized by horizontal attenuated total reflection infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle goniometry. The monolayers bonded to the silicon surface preferentially through the olefin with no detectable bonds between the carboxylic acids and silicon. The crystallinity of the monolayer was studied by infrared spectroscopy through the antisymmetric--v(a)(CH(2))--and symmetric--v(s)(CH(2))--stretches for methylene. Because it is important for future applications to assemble functional surfaces, methods to react the acid-terminated monolayers with trifluoroacetic anhydride and triethylamine to yield a symmetric anhydride on the monolayer were studied. These anhydrides were reacted with a variety of milligram-quantity amines to yield amide-terminated surfaces. This method was general, and a variety of amines could be bonded to the monolayer. The stabilities of these monolayers upon exposure to ambient conditions and under a variety of solvents were described. Because patterned monolayers have found wide applications, we have developed methods to pattern 1-octadecylamine and poly(ethylenimine) on the micrometer scale using soft lithography. In addition, polymer brushes of polynorbornene with thicknesses from 32 to 150 nm were grown from monolayers patterned with the Grubbs' catalyst. The patterned surfaces were imaged by scanning electron microscopy, scanning probe microscopy, and ellipsometry to determine the thicknesses of the patterns and the fidelity of the method.     

A facile one‐pot synthesis of novel substituted 1,2,3,4‐tetrahydropyrimidine,part 2: Synthesis of 1‐(aralkyl/aryl)‐3‐(alkyl/aralkyl/aryl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines

1‐(Aralkyl/aryl)‐3‐(alkyyaralkyl)‐5‐aroyl‐1,2,3,4‐tetrahydropyrimidines ( 2a‐c ) have been synthesized by dethiomethylation of 5‐aroyl‐6‐methylthio‐1,2,3,4‐tetrahydropyrimidines ( 1a‐c ). An alternative one‐pot synthetic strategy has been developed for the title compounds 2a‐t by the reaction of enaminones 3 with pri mary amine and formaldehyde in refluxing methanol in good yields.     

Nuclear moments and the change in the mean square charge radius of neutron deficient thallium isotopes

The hyperfine structure, isotope and isomeric shifts in the atomic transition 6p ² P _3/2–7s ² S _1/2, =535 nm have been measured for theI=7 andI=2 states of^{190, 192, 194, 196}Tl; theI=1/2 andI=9/2 states of¹⁹¹Tl and the I=7 isomer of¹⁸⁸Tl. The thallium isotopes were prepared as fast atomic beams at the GSI on-line mass separator following fusion reactions and — in some cases — subsequent-decay. The nuclear dipole moments, electric quadrupole moments and the change in the nuclear mean square charge radius are evaluated. Theuu-isotopes show an isomeric shift which changes sign between¹⁹²Tl and¹⁹⁴Tl.Dedicated to P. Armbruster on the occasion of his 60th birthday