Direct numerical simulation of stationary particles in homogeneous turbulence decay: Application of the k–ε model

This study focuses on understanding how the presence of particles, in homogeneous turbulence decay, affects the dissipation of dissipation coefficient within the volume averaged dissipation transport equation. In developing this equation, the coefficient for dissipation of dissipation was assumed to be the sum of the single phase coefficient and an additional coefficient that is related to the effects of the dispersed phase. Direct numerical simulation was used to isolate the effect of stationary particles in homogeneous turbulent decay at low Reynolds numbers (Re_L = 3.3 and 12.5). The particles were positioned at each grid point and modeled as point forces and a comparison was made between a 64³ and 128³ domain. The results show that the dissipation of dissipation coefficient correlates well with a dimensionless parameter called the momentum coupling factor.     

Effect of trivalent iron substitution on structure and properties of PLZT ceramics

Polycrystalline samples of Fe-modified PLZT (lead lanthanum zirconate titanate) are prepared by a mixed-oxide reaction technique. The formation of the compound has been confirmed by X-ray powder diffraction studies. The unit cell structure of the material has been found to be rhombohedral. Fourier-transform infrared reflection (FTIR) spectra have been recorded to correspond the structural changes associated with the phase formation. The effects of Fe concentration on the microstructure and dielectric constant of PLZT materials have been investigated. The ferroelectric phase transition of PLFZT materials is studied using dielectric measurements, which shows a shift in the transition temperature towards the higher-temperature side with increased Fe ion concentration. The piezoelectric constants of this system are investigated by the same way of changed contents of Fe ion in the main PLZT compound. The optimum values of Q_m, k_p, and d₃₃ are 73, 0.32 and 406. The electrical conductivity increases with the increase in Fe ion concentration. PACS 77.80.Bh; 77.84.Dy; 77.22.Ch; 72.15.Eb; 06.60.Ei; 39.30.+w     

Sulfonation of metallocene‐based polyolefinic elastomers and its influence on physicomechanical properties: Effect of reaction parameters,styrene grafting,and pendant chain length

Direct sulfonation and styrene‐mediated sulfonation were carried out onto metallocene‐based poly(ethylene‐co‐octene) (POE) and poly(ethylene‐co‐butene) (PBE) elastomers to impart polarity on the completely nonpolar rubbery matrices and to prepare a new class of elastomer. The influence of styrene‐grafting and pendant chain length on the degree of sulfonation was also studied. The effects of sulfonation, styrene grafting and styrene‐mediated sulfonation at their optimized levels on various physicomechanical properties were thoroughly investigated, and the resultant properties were correlated with structures of the modified elastomers. Higher extent of sulfonic acid groups were introduced through direct sulfonation in comparison with the styrene‐mediated sulfonation, whereas better thermal and mechanical properties were obtained through styrene‐mediated sulfonation in comparison with the direct sulfonation process. PBE had shown higher degree of sulfonation and percentage grafting than POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8023–8040, 2008     

Effect of sol concentration on the properties of ZnO thin films prepared by sol-gel technique

ZnO thin films are deposited on the glass substrates by sol-gel drain coating technique by varying the concentration of the sol. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis were used to investigate the effect of sol concentration on the crystallinity and surface morphology of the films. The results show that with increase in sol concentration, the value of full width at half maximum (FWHM) of (0 0 2) peak decreases while the strain first increases and then decreases. The sol with higher concentration results in the increase in the grain size. The studies on the optical properties show that the band gap value increases from 3.27 to 3.3 eV when the sol concentration changes from 0.03 to 0.1 M. The photoconductivity studies reveal that the film for 0.05 M sol shows the maximum photoresponse for ultraviolet (UV) wavelength (<400 nm) which is co-related with the deep-level defects. The growth and decay of the photocurrent is found to be slowest for the same film.     

Period adding bifurcation in a logistic map with memory

We introduce a single step memory dependence in the fully chaotic logistic map. This makes it a two dimensional system in general. However, we show that by using composite functions to define two one dimensional maps, it is possible to obtain some analytic results for the bifurcation structure. Numerical results support the calculated bifurcation scheme and, in addition, yield a further insight which allows the calculation of the convergence ratio for a new period adding scenario.     

Dehydration kinetics of an Indian clay

Decomposition of clay from Garo Hills of Meghalaya (India) was studied by dynamic thermogravimetry. A fourteen kinetic equation procedure was applied for analysis of non-isothermal weight change upto a temperature of 1223 K. Two stages of decomposition were clearly distinguised i.e. the initial dehydration period at temperature 373 K to 673 K and the dehydroxylation period in the temperature range 723 K to 1073 K. First order decomposition mechanism was found to be applicable to both dehydration and dehydroxylation steps. Activation energies of 67 kJ/mol and 278 kJ/mol are estimated for the first and second steps with frequency factors of 16.3 s^–1 and 5.16×10⁶s^–1 respectively. The weight loss relating to the steps in TG curves allows determination of the contents of the basic mineral in the clay. Percentages of Al₂O₃.SiO₂ and total volatiles as calculated from weight loss data are in accordance with the results of classical chemical analysis.

---

Zusammenfassung Mittels DTG wurde die thermische Zersetung von Ton aus der Garo-Hills-Gegend bei Meghalaya (Indien) untersucht. Zur Analyse der nicht-isothermen Gewichtsveränderungen bis zu einer Temperatur von 1223 K wurde ein Verfahren mit vierzehn kinetischen Gleichungen angewendet. Zwei Teilschritte der Zersetzung können eindeutig unterschieden werden, nämlich die anfängliche Dehydratationsperiode bei Temperaturen von 373 bis 673 K und die Dehydroxylierungsperiode bei Temperaturen zwischen 723 K un 1073 K. Für beide Vorgänge konnte als Reaktionsmechanismus eine Zersetzung erster Ordnung angewendet werden. Für den ersten un zweiten Teilschritt konnten Aktivierungsenergien von 67 kJ/mol bzw. 278 kJ/mol un Frequenzfaktoren von 16.3s^–1 bzw. 5.16×10⁶s^–1 ermittelt werden. Der aus den TG-Kurven hervorgehende Gewichtsverlust läßt auf den Gehalt des Tones an Basismineral schließen. Der prozentuelle Gehalt an Al₂O₃, SiO₂ und der gesamten flüchtigen Bestandteile, berechnet aus den Gewichtsverlusdaten, stimmt mit den Ergebnissen aus herkömmlichen chemischen Analysen überein.

     

Transition metal catalysed Grignard-like allylic activation across tetragonal tin(II) oxide

The reaction of allyl halide and a carbonyl compound under the aegis of tetragonal tin(II) oxide and catalyticd ⁸,d¹⁰ metal complexes provides the corresponding homoallylic alcohol, via a novel allyl tin intermediate.     

Synthesis of highly functionalized indeno[1,2-b]furans

Some novel functionalized indeno[1,2-b]furans were synthesized from the reaction of indandione/indanone and aldehydes at room temperature followed by the reaction of the Knoevenagel condendensed intermediate with 4-hydroxycoumarins in the presence of iodine as catalyst in dimethyl sulfoxide (DMSO) under thermal conditions. The reaction involved in a condensation and Michael addition followed by lactone ring opening and intramolecular cyclization process to afford the product in high yield in easy work-up procedure.     

Atomically flat single terminated oxide substrate surfaces

Scientific interest in atomically controlled layer-by-layer fabrication of transition metal oxide thin films and heterostructures has increased intensely in recent decades for basic physics reasons as well as for technological applications. This trend has to do, in part, with the coming post-Moore era, and functional oxide electronics could be regarded as a viable alternative for the current semiconductor electronics. Furthermore, the interface of transition metal oxides is exposing many new emergent phenomena and is increasingly becoming a playground for testing new ideas in condensed matter physics. To achieve high quality epitaxial thin films and heterostructures of transition metal oxides with atomically controlled interfaces, one critical requirement is the use of atomically flat single terminated oxide substrates since the atomic arrangements and the reaction chemistry of the topmost surface layer of substrates determine the growth and consequent properties of the overlying films. Achieving the atomically flat and chemically single terminated surface state of commercially available substrates, however, requires judicious efforts because the surface of as-received substrates is of chemically mixed nature and also often polar. In this review, we summarize the surface treatment procedures to accomplish atomically flat surfaces with single terminating layer for various metal oxide substrates. We particularly focus on the substrates with lattice constant ranging from 4.00 Å to 3.70 Å, as the lattice constant of most perovskite materials falls into this range. For materials outside the range, one can utilize the substrates to induce compressive or tensile strain on the films and explore new states not available in bulk. The substrates covered in this review, which have been chosen with commercial availability and, most importantly, experimental practicality as a criterion, are KTaO₃, REScO₃ (RE = Rare-earth elements), SrTiO₃, La_0.18Sr_0.82Al_0.59Ta_0.41O₃ (LSAT), NdGaO₃, LaAlO₃, SrLaAlO₄, and YAlO₃. Analyzing all the established procedures, we conclude that atomically flat surfaces with selective A- or B-site single termination would be obtained for most commercially available oxide substrates. We further note that this topmost surface layer selectivity would provide an additional degree of freedom in searching for unforeseen emergent phenomena and functional applications in epitaxial oxide thin films and heterostructures with atomically controlled interfaces.     

CoFe2O4–SiO2–SO3H nanocomposite as a magnetically recoverable catalyst for oxidative bromination of alkynes

A hybrid catalyst has been prepared by incorporating sulfonic acid onto cobalt ferrite magnetic nanoparticles. The catalyst was successfully applied for rapid (20?min) synthesis of α,α-dibromoketones directly from alkynes and NBS. The reaction works well in the presence of 10?wt% of the catalyst at room temperature to produce the desired products in high yield. The catalyst could be recovered using an external magnet and reused without appreciable change in activity.