Sulfonation of metallocene‐based polyolefinic elastomers and its influence on physicomechanical properties: Effect of reaction parameters,styrene grafting,and pendant chain length

Direct sulfonation and styrene‐mediated sulfonation were carried out onto metallocene‐based poly(ethylene‐co‐octene) (POE) and poly(ethylene‐co‐butene) (PBE) elastomers to impart polarity on the completely nonpolar rubbery matrices and to prepare a new class of elastomer. The influence of styrene‐grafting and pendant chain length on the degree of sulfonation was also studied. The effects of sulfonation, styrene grafting and styrene‐mediated sulfonation at their optimized levels on various physicomechanical properties were thoroughly investigated, and the resultant properties were correlated with structures of the modified elastomers. Higher extent of sulfonic acid groups were introduced through direct sulfonation in comparison with the styrene‐mediated sulfonation, whereas better thermal and mechanical properties were obtained through styrene‐mediated sulfonation in comparison with the direct sulfonation process. PBE had shown higher degree of sulfonation and percentage grafting than POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8023–8040, 2008     

Markov property of continuous dislocation band propagation

Tensile tests were carried out by deforming polycrystalline samples of substitutional Al–2.5%Mg alloy at room temperature for a range of strain rates. The Portevin–Le Chatelier (PLC) effect was observed throughout the strain rate regime. The deformation bands in this region are found to be of type A in nature. From the analysis of the experimental stress time series data we could infer that the dynamics of type A dislocation band propagation is a Markov process.     

A crystal field investigation of the properties of RCuAs2 (R=Pr, Nd, Sm, Tb, Dy, Ho, Er and Yb)

A crystal field (CF) investigation of the magnetic properties and heat capacities of RCuAs₂ (R=Pr, Nd, Sm, Tb, Dy, Ho, Er and Yb) has been carried out using the observed average magnetic susceptibilities (1.8-300 K) of the title compounds. The CF parameters proposed for the systems show a systematic variation throughout the rare-earth series. Other physical properties dependent on the CF are also computed and compared with available experimental data. The experimental heat capacity data reported for a limited range of temperature agree well with computed heat capacity for all the compounds (except SmCuAs₂ and YbCuAs₂). CF J mixing was found to be appreciable for all the samples except YbCuAs₂.     

Transition metal catalysed Grignard-like allylic activation across tetragonal tin(II) oxide

The reaction of allyl halide and a carbonyl compound under the aegis of tetragonal tin(II) oxide and catalyticd ⁸,d¹⁰ metal complexes provides the corresponding homoallylic alcohol, via a novel allyl tin intermediate.     

Search designs for searching for one among the two-and three-factor interaction effects in the general symmetric and asymmetric factorials

This paper describes the construction of search designs which permit the estimation of the general mean and main-effects, and allow the search for and estimation of one possibly unknown non-zero effect among the two-and three-factor interactions in the general symmetric and asymmetric factorial set-up.     

Atomically flat single terminated oxide substrate surfaces

Scientific interest in atomically controlled layer-by-layer fabrication of transition metal oxide thin films and heterostructures has increased intensely in recent decades for basic physics reasons as well as for technological applications. This trend has to do, in part, with the coming post-Moore era, and functional oxide electronics could be regarded as a viable alternative for the current semiconductor electronics. Furthermore, the interface of transition metal oxides is exposing many new emergent phenomena and is increasingly becoming a playground for testing new ideas in condensed matter physics. To achieve high quality epitaxial thin films and heterostructures of transition metal oxides with atomically controlled interfaces, one critical requirement is the use of atomically flat single terminated oxide substrates since the atomic arrangements and the reaction chemistry of the topmost surface layer of substrates determine the growth and consequent properties of the overlying films. Achieving the atomically flat and chemically single terminated surface state of commercially available substrates, however, requires judicious efforts because the surface of as-received substrates is of chemically mixed nature and also often polar. In this review, we summarize the surface treatment procedures to accomplish atomically flat surfaces with single terminating layer for various metal oxide substrates. We particularly focus on the substrates with lattice constant ranging from 4.00 Å to 3.70 Å, as the lattice constant of most perovskite materials falls into this range. For materials outside the range, one can utilize the substrates to induce compressive or tensile strain on the films and explore new states not available in bulk. The substrates covered in this review, which have been chosen with commercial availability and, most importantly, experimental practicality as a criterion, are KTaO₃, REScO₃ (RE = Rare-earth elements), SrTiO₃, La_0.18Sr_0.82Al_0.59Ta_0.41O₃ (LSAT), NdGaO₃, LaAlO₃, SrLaAlO₄, and YAlO₃. Analyzing all the established procedures, we conclude that atomically flat surfaces with selective A- or B-site single termination would be obtained for most commercially available oxide substrates. We further note that this topmost surface layer selectivity would provide an additional degree of freedom in searching for unforeseen emergent phenomena and functional applications in epitaxial oxide thin films and heterostructures with atomically controlled interfaces.     

Montmorillonite K-10 clay catalyzed solvent-free synthesis of bis-indolylindane-1,3-dione, 2-(1′,3′-dihydro-1H-[2,3′]biindolyl-2′-ylidene)-indan-1,3-dione and bisindolylindeno[1,2-b]quinoxaline under microwave irradiation

An environmentally benign protocol has been described for the synthesis of novel 2-(1′,3′-dihydro-1H-[2,3′]biindolyl-2′-ylidene)-indan-1,3-diones/bis-indolylindane-1,3-diones from ninhydrin and 3-substituted/unsubstituted indoles. It uses montmorillonite K-10 as catalyst in a solvent-free condition under microwave irradiation. The method was also used for the synthesis of novel bisindolylindeno[1,2-b]quinoxaline derivatives.     

Enzyme-mediated biodegradation of heat treated commercial polyethylene by Staphylococcal species

Extruded low-density polyethylene (LDPE) films commonly available in the market as 20-micron thick carrier bags were autoclaved, overlaid on nutrient agar plates and inoculated with BP/SU1 strain of Staphylococcus epidermis. The nutrient agar plate showed growth of the organism within two to three days. The polymer film supporting the growth of the organism showed pore formation as recorded by SEM analysis. The growth of BP/SU1 is supported by the presence of shredded LDPE as its only carbon source in inorganic salt minimal nutrient medium. The organism survives even after three months of inoculation and this is accompanied by gradual breakdown of the size of the shredded plastic as seen by light scattering. The cell-free supernatant of the organism, grown with the help of shredded plastic shows the presence of the over expressed proteins with approximate molecular weight of about 55 kDa and 35 kDa, through SDS-PAGE analysis.     

Simultaneous occurrence of energy transfer and photoinduced electron transfer in interactions of hen egg white lysozyme with 4-nitroquinoline-1-oxide

The carcinogenic drug 4-nitroquinoline-1-oxide (4NQO) has been found to bind with the protein hen egg white lysozyme as evident from fluorescence quenching experiments. The binding constant and stoichiometry have been determined. The values of the thermodynamic parameters indicate that the interaction is an enthalpy-driven spontaneous phenomenon. The experimental value of change in free energy is similar to that obtained from the docking study. The far UV circular dichroism spectra show some changes in the secondary structure of protein. The high value of bimolecular quenching constant leads to the possibility of Förster resonance energy transfer (FRET). Along with FRET, the photoinduced electron transfer (PET) from tryptophan residue of protein to 4NQO has also been evident from the transient absorption spectra obtained in laser flash photolysis experiments. The simultaneous occurrence of FRET and PET is the key factor for quenching of intrinsic fluorescence of the protein as it binds with the drug.