Synthesis and structural characterisation of a novel tris-methylene bridged compound (NO) 4Fe2 Se(μ-CH2)3

The tris-methylene bridged compound (NO)₄Fe₂Se(μ-CH₂)₃ has been isolated. It has been characterised by IR and ¹H, ¹³C, and ⁷⁷Se NMR spectroscopy. Its structure has been determined by single-crystal X-ray diffraction methods. The structure consists of a heavy atom triangle consisting of one Se and two Fe atoms. The Fe-Fe and the two Fe-Se edges are bridged by methylene groups.     

Adsorptive stripping voltammetric determination of chromium in gallium

The electroanalytical chemistry of trace metals has progressed strongly with the development of cathodic stripping voltammetry (CSV) preceded by adsorption collection of organic metal complexes. A sensitive method for the determination of trace amount of chromium in gallium is described. Gallium is dissolved in sodium hydroxide containing hydrogen peroxide. The method is based on the catalytic activity of nitrate ions on the reduction of Cr(III)TTHA (triethylene tetramine-N,N,N',N',N',N'-hexaacetic acid) complex. The sensitivity of this method is further improved by adsorption preconcentration of Cr(III)TTHA complex at a hanging mercury drop electrode (HMDE). The Cr(III) formed at the electrode surface by the reduction of Cr(VI), which is present in the bulk solution, is immediately complexed by TTHA. The adsorbed complex is then reduced at a peak potential of - 1.26 V, and the peak height of Cr(III) reduction is measured. The determination limit was restricted by the amount of chromium present in the reagent blank solution. The method is suitable for the determination of chromium at level as low as 0.2 mug g(-1) (with about 50 mg of sample) and a relative standard deviation of 15%.     

Recovery of plutonium and americium from laboratory acidic waste solutions using tri-n-octylamine and octylphenyl-N-N- diisobutylcarbamoylmethylphosphine oxide

Plutonium from acidic waste solutions has been recovered quantitatively using tri-n-octylamine (TnOA) in xylene and americium using a mixture of octylphenyl-N-N- diisobutylcarbamoylmethylphosphine oxide (CMPO) and TBP in dodecane by extraction and extraction chromatographic methods. The Pu ( IV ) TnOA species extracted into the organic phase from higher nitric acid concentrations has been confirmed as (R(3)NH)(2)Pu(NO(3))(6) (where R(3)N = TnOA by employing slope analysis as well as spectrophotometric studies.     

Extraction of actinides and fission products by octyl(phenyl)-N,N-diisobutylcarbamoylmethyl-phosphine oxide from nitric acid media

Extraction of promethium(III), uranium(VI), plutonium(IV), americium(III), zirconium(IV), ruthenium(III), iron(III) and palladium(II) has been carried out with a mixture of octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) and tributyl phosphate (TBP) in dodecane. The effects of nitric acid, TBP and CMPO concentrations on the extraction of these metal ions have been studied. The nature of the species of the above metal ions extracted into the organic phase has been suggested.     

Extraction of U(VI) by cyanex-272

Extraction of U(VI) from HNO₃, HCl and HClO₄ media using cyanex-272 (bis[2,4,4 trimethyl pentyl] phosphinic acid)/n-dodecane has been carried out. In the case of HNO₃ and HClO₄ media, the distribution ratio (D) value first decreases and then increases, whereas from HCl medium it first decreases and then remains constant with increase in H⁺ ion concentration. At lower acidities, U(VI) was extracted as UO₂(HA₂)₂ by an ion exchange mechanism, whereas at higher acidities as UO₂(NO₃)₂ ^.2(H₂A₂) following a solvation mechanism. The D for U(VI) by cyanex-272, PC-88A and DEHPA at low acidities follows the order cyanex-272 > PC-88A > DEHPA. Also, cyanex-272 was found to extract U(VI) more efficiently than TBP at 2M HNO₃. The effect of diluents on the extraction of U(VI) by cyanex-272 followed the order cyclohexane > n-dodecane > CCl₄ > benzene. The loading of U(VI) into cyanex-272/n-dodecane from 2M HNO₃ has shown that at saturation point, cyanex-272 was 78% loaded. No third phase was observed at the saturation level. The stripping of U(VI) from the loaded organic phase was not possible with water, it was poor with acetic acid and sodium acetate but quantitative with oxalic acid, ammonium carbonate and sodium carbonate.     

Iron(III) complexes of a tetradentate tripodal ligand N,N′,N″-tris (2-benzimidazolyl-methyl)amine

Summary Fe^III complexes of a tetradentate ligand with pendant benzimidazolyl groups have been synthesized and characterized. Room temperature Mössbauer spectra depict a quadruple split doublet in the case of NO _inf3 ^p– as co-ligand, while a nearly symmetrical one line spectrum is obtained for complexes with Cl^–as co-ligand. The isomer shift values are towards the lower end of the range found for other high spin Fe^III complexes. ¹H-n.m.r. spectra of the complexes reveal relatively broad linewidths with large isotropic shifts. Paramagnetically shifted resonances are observed in the range of –10.0–+70.0 p.p.m.Author to whom all correspondence should be directed.     

New iso-propoxides, tert-butoxides and neo-pentoxides of niobium(V): synthesis, structure, characterization and stabilization by trifluoroheteroarylalkenolates and pyridine ligands

The synthesis and characterization of nine new heteroleptic alkoxides of niobium is described. Metathesis reactions of Nb(2)Cl(10) with (t)BuCH(2)OH and pyridine (py) or 4-dimethylaminopyridine (DMAP) affords monomeric octahedral complexes Nb(OCH(2)(t)Bu)(5)py (1) and Nb(OCH(2)(t)Bu)(5)DMAP (2), respectively, in high yields (>60%). The same reaction with (t)BuOH resulted in a chloro functionalized alkoxide Nb(O(t)Bu)(4)pyCl (3) and could not be pushed to complete removal of remaining Cl(-) ligand. The introduction of a chelating bidental ligand 3,3,3-trifluoro-1-(pyridine-2-yl)propen-2-ol (2-PyCHCOHCF(3)) (4') in the dimeric framework of Nb(2)(O(i)Pr)(10) (4') produced a heteroleptic, monomeric niobium complex Nb(O(i)Pr)(4)(2-PyCHCOCF(3)) (4) with significantly enhanced stability and volatility. As a comparison to (4), five different heteroaryl systems (5-9) with the same side chain have been synthesized and examined in order to understand the influence upon physio-chemical properties. All the new compounds (1-9) have been characterized by microanalysis, variable temperature multinuclear NMR spectroscopy, mass spectrometry, thermal analysis and single crystal X-ray diffraction studies ((3), (4) and (9)). The molecular structure of (3) revealed mononuclear species with Nb atoms present in the distorted octahedral environment of four (t)BuO, one chloride and one pyridine ligand. Compounds (4) and (9) consisting of four (i)PrO and a trifluoroheteroarylenolate exhibited a stronger distortion in the molecular geometry due to the rigidity of chelating β-alkenolate moiety.     

Development of two-step radioimmunoassay (RIA) for the measurement of free triiodothyronine in human serum based on antibody coated tubes

Journal of Radioanalytical and Nuclear Chemistry - We describe a simple, user friendly two-step radioimmunoassay (RIA) based on antibody coated tubes for the measurement of free triiodothyronine in...     

Reactivity of a Cyclopentadienyl Containing Heterobimetallic Alkoxide

The synthesis of the new heteroleptic heterotrimetallic cluster, [(C₅H₅)Sn(μ-OBu^t)₂Ge(OBu^t)Mo(CO)₅] (1) has been achieved by a thermally induced CO substitution of the transition metal derivative, Mo(CO)₆, by the basic germanium atom of the cyclopentadienyl heterobimetallic alkoxide, [(C₅H₅)Sn(μ-OBu^t)₂Ge(OBu^t)]. The microanalysis, molecular weight (monomer in benzene), IR and multinuclear NMR data and X-ray diffraction study is consistent with the formulation of 1. The Sn atom has a trigonal pyramidal coordination environment formed by a aysmmterically π-bonded terminal C₅H₅ ring and two symmetrically bridged tert-butoxy groups. The four-coordinate Ge atom lies at the centre of a distorted tetrahedron and is terminally attached to a tert-butoxy group and a Mo(CO)₅5^? fragment.