Selective preconcentration of Lanthanum(III) by Coriolus versicolor immobilised on Amberlite XAD-4 and its determination by ICP-OES

Coriolus versicolor, a wood fungus, was immobilised on Amberlite XAD-4 and used as solid-phase biosorbent for preconcentrations of rare earth elements. La(III), Th(IV), U(IV) and Ce(III) were subjected to solid-phase extraction procedure. We observed that La(III) was selectively preconcentrated, while other ions remained in solution at pH 6.0. 5.0 mL of 1.0 mol L^?1 HCl was used to elaute La(III) from column. 250 mg of C. versicolor loaded on 1000 mg of XAD-4 was optimised as solid-phase matrix. Concentrations of ions in solutions were determined by inductively coupled plasma– optical emission spectrometry (ICP-OES). The calibration plot after preconcentration was linear in the range from 1.0 to 50.0 ng mL^?1 for La(III). Limit of detection was found as 0.27 ng mL^?1 for La(III) by SPE method. Relative standard deviation was found lower than 6.7% for 1.0 ng mL^?1 of La(III) solution (n = 10). The sensitivity of ICP-OES was improved by a factor of 46.8. The applicability of the method was validated through the analysis of certified reference samples of tea (NCS ZC-73014) and spinach (NCS ZC-73013).     

Determination of mineral phosphate species in sedimentary phosphate rock in Mardin, SE Anatolia, Turkey by sequential extraction

The importance of the effect of phosphate rock depends on the chemical form of phosphorus in which this element is combined. The paper presents the results of inorganic and organic forms of phosphorus in the phosphate rock from Mazidag-Derik, Semikan deposit located at Mardin city at SE Anatolia of Turkey. Total phosphorus concentration in the rock is an average 18.5%. The inorganic phosphorus mean % contents were 99.98% for studied sedimentary phosphate rock. Speciation of inorganic phosphorus was carried out using a method based on sequential extractions of the sedimentary phosphate rock each releasing four forms of inorganic phosphorus: loosely sorbed phosphorus, phosphorus bound to aluminium (P-Al), phosphorus bound to calcium (P-Ca) and phosphorus bound to iron (P-Fe). Calcium bound phosphorus is the dominant form of inorganic phosphorus in the studied sedimentary phosphate rock. Aluminium bound phosphorus is the second, iron bound phosphorus is the third most prevailing form. Loosely bound phosphorus is present in the lowest amounts. Analyses of phosphorus forms in sedimentary phosphate rock using a UV spectrophotometric method and ICP-AES are reported here. For the phosphorus the two methods give the same results and the concentrations are in good agreement with the reference values.     

Towards standardization of external quality assessment schemes by using bias values based on biological variation

The precision and trueness of current instruments and methods in clinical laboratories is much better than in the past. However, the z-score and other comparison variables that are currently used in external quality assessment programs are based on relative data. Thus, they may change from program to program and also change over time within the same program and consequently may not be useful or cost-effective. We therefore devised a test-specific decision limit for accepting or rejecting test results based on a combination of the data of within- and between-subject biological variations. We then applied these limits to a group of tests performed in our laboratory and compared our results with those of external quality assessment programs. In addition, we combined external and internal quality control data on the same graph and prepared a two-dimensional graph for different levels of control sera. Inspection of all results of control sera on this new graph was more useful for decision making. We concluded that the z-score is not reliable for comparisons of test results in external quality assessment. As a substitute for this currently accepted practice, we assert that control limits based on biological variation are more reliable, and can be useful in the evaluation of both external and internal quality assessments and their combination on this new graph.     

Synthesis, interface (Au/M2Pc2/p-Si), electrochemical and electrocatalytic properties of novel ball-type phthalocyanines

The phthalodinitrile derivative (3) was prepared by the reaction of 4,4'-(octahydro-4,7-methano-5H-inden-5-ylidene)bisphenol (1) and 4-nitrophthalonitrile (2) with dry DMF as the solvent in the presence of the base K(2)CO(3) by the method of nucleophilic substitution of an activated nitro group in an aromatic ring. The template reaction of 3 with the corresponding metal salts gave the novel bi-nuclear ball-type metallophthalocyanines, MPcs {M = Co (4), Cu (5), Zn (6)}. Newly synthesized compounds were characterized by elemental analysis, UV-vis, FT-IR (ATR), MALDI-TOF mass and (1)H-NMR spectroscopy techniques. The electronic spectra exhibit an intense π→π* transition of characteristic Q and B bands of the Pc core. The dielectric properties and interface between the spin coated films of 4-6 and a p-type silicon substrate have been studied by fabricating metal-insulator-semiconductor capacitors. The results indicated that the frequency dependence of the dielectric permittivity, ε'(ω), exhibits non-Debye type relaxation for all the temperatures investigated. The ac conductivity results indicated that the conduction mechanism can be explained by a hopping model at low temperatures (<430 K) and a free band conduction mechanism at high temperatures (≥430 K). The density of interface state calculations on these novel compounds showed that the combination of Au/4/p-Si is a promising structure with a high dielectric constant and a low interface trap density suitable for metal-oxide-semiconductor devices. The electrochemical properties of the Pc complexes were examined by cyclic voltammetry, differential voltammetry and controlled potential coulometry on platinum in non-aqueous media. The complexes showed ring-based and/or metal-based mixed-valence behaviours as a result of the remarkable interaction between the two Pc rings and/or metal centres. The mixed-valence splitting values for the complexes suggested that the mixed valence species are considerably stable. The Vulcan XC-72(VC)/Nafion(Nf)/4 modified glassy carbon electrode showed much a higher catalytic performance towards oxygen reduction than those of VC/Nf/5 and VC/Nf/6 modified ones.     

Fatty acid composition of six Centaurea species growing in Konya, Turkey

In this study, fatty acid compositions of six Centaurea species growing in the Konya region were determined. The fatty acid composition of Centaurea balsamita, Centaurea calolepis, Centaurea carduiformis subsp. carduiformis, Centaurea cariensis subsp. maculiceps, C. cariensis subsp. microlepis and Centaurea iberica were analysed. Four species of these six Centaurea are endemic to Turkey. The endemic Centaurea species are C. calolepis, C. carduiformis subsp. carduiformis, C. cariensis subsp. maculiceps and C. cariensis subsp. microlepis. Generally, C 18:2 ω6 linoleic acid, C 16:0 palmitic acid, C 18:3 ω3 linolenic acid and C 18:1 oleic acid were found to be the major fatty acids in all species. Polyunsaturated fatty acids (PUFAs) were found in higher amounts than saturated fatty acids and monounsaturated fatty acids in all species. PUFAs were determined at 55.10%, 50.25%, 51.41%, 41.02%, 46.18% and 58.80% in C. balsamita, C. calolepis, C. carduiformis subsp. carduiformis, C. cariensis subsp. maculiceps, C. cariensis subsp. microlepis and C. iberica, respectively.     

Using a lipase as a high-throughput screening method for measuring the enantiomeric excess of allylic acetates

This report describes a high-throughput method for measuring the enantiomeric excess of allylic acetates. Such methods are useful tools for screening libraries of potential catalysts for enantioselective reactions. This technique, which is called EMDee for an enzymatic method for determining enantiomeric excess, uses the lipase from Pseudomonas cepacia to hydrolyze the (R) enantiomer of an allylic acetate, while the (S) enantiomer does not react. The rate of the reaction is monitored by measuring the acetic acid that is produced during the hydrolysis reaction with a pH indicator. Using the Michaelis-Menten equation, the rate of the reaction can be correlated with the concentration of the (R) enantiomer. This method can process 88 samples in less that 30 min.