Novel monofunctional and bifunctional boronic acid‐functionalized squarylium dyes as precolumn and on‐column labels for protein analysis by capillary electrophoresis with laser‐induced fluorescence

This article presents a continuous capillary electrophoresis with laser‐induced fluorescence (CE‐LIF) following spectral studies of the noncovalent interactions between novel Squarylium Boronic Acid 4 (SQ‐BA4) & Squarylium Diboronic Acid 2 (SQ‐DBA2) squarylium dyes and human serum albumin (HSA). Two protocols were used wherein the on‐column‐labeling protocol was found to be more sensitive than the precolumn one by showing a better enhancement in the peak area of the HSA–dye complex besides lower limits of detection (LODs) for HSA. Also, stability studies were conducted with or without HSA using precolumn‐labeling mode over one week exhibiting the superiority of SQ‐BA4 to SQ‐DBA2. Then, a mixture containing three model proteins, HSA, β‐lactoglobulin B, and transferrin, was labeled on‐column with both dyes and completely resolved by CE‐LIF after optimization of several parameters. Both dyes provided lower LODs for HSA than those of β‐lactoglobulin B and transferrin with higher sensitivities. In addition, the SQ‐BA4 dye showed again greater sensitivities with all the three proteins than SQ‐DBA2.     

Facile synthesis of 1-(arylimino)naphthalen-2(1H)-ones from anilines and 2-naphthols promoted by NaBr/K2S2O8/CAN

An efficient method has been developed for the synthesis of 1-(arylimino)naphthalen-2(1H)-ones through the cascade reaction of anilines and 2-naphthols promoted by NaBr/K₂S₂O₈/Ce(NH₄)₂(NO₃)₆. Using this protocol, a series of 1-(arylimino)naphthalen-2(1H)-ones was obtained in good to excellent yields (17 examples, 70–92% yields). The reactions may proceed through the following steps: bromination of 2-naphthols by in-situ-generated bromine from NaBr and K₂S₂O₈ to afford 1-bromonaphthalen-2-ols, coupling of 1-bromonaphthalen-2-ols with anilines to afford the corresponding amines, and subsequent oxidation of the amines into the products by Ce(NH₄)₂(NO₃)_6. These newly obtained α-imine ketones have great potentials for synthesis of special optical materials bearing naphthalene moiety.     

Separation of organohalides from their microemulsions by the pervaporation technique: Application to the n-butyl bromide/SDS/n-butanol/water system

An n-butyl bromide/sodium dodecyl sulfate/n-butanol/water microemulsion system was chosen as a model of an organohalide-containing microemulsion. Two systems were prepared using the Bourayne method: a water-rich system and an n-butyl-bromide-rich system. The destabilization of this micro-organized system and the phase separation were investigated. This microemulsion, in which the oil phase in the feed is the lower layer, was successfully destabilized using the pervaporation technique with polydimethylsiloxane and poly(vinyl alcohol) membranes. In this way, different factors governing the separation process were investigated such as the mass transfer and the effect of time and operating temperature on the microemulsion destabilization.     

Reaction of Pyrimidinonethione Derivatives: Synthesis of N‐Methyl‐2‐Hydrizinopyrimidine‐4‐One,Thiazolo[3,4‐b] N‐Methylpyrimidinone; 2‐(1‐Pyrazolonyl) N‐Methylpyrimidine‐4‐one and 2‐Hydrazino‐N‐Methyl Pyrimidine‐4‐One Derivatives

6‐Aryl‐5‐cyano‐4‐pyrimidinone‐2‐thion derivatives 1a‐c reacted with methyl iodide (1:2) to give the corresponding 2‐S,N‐dimethyl pyrimidine‐4‐one derivatives 2a‐c . Compounds 2a‐c were in turn, reacted with hydrazine hydrate to give the sulfur free reaction products 3a‐c . These reaction products were taken as the starting materials for the synthesis of several new heterocyclic derivatives. Reaction of 3a‐c with acetic anhydride and formic acid gave pyrimido triazines 4a‐c and 7a‐c , respectively. Their reactions with active methylene containing reagents gave the corresponding 2‐(1‐pyrazonyl)‐N‐methyl pyrimidine derivatives 9a‐c and 10a‐c , respectively. Their reactions with aromatic aldehydes afforded the corresponding 2‐hydrazono pyrimidine derivatives 11a‐c . The structure of these reactions products were established based on both elemental analysis and spectral data studies.     

Traceless chemical ligations from O-acyl serine sites

Chemical ligation via O- to N-acyl transfer of O-acylated serine containing peptides affords serine containing native peptides via 8- and 11-membered cyclic transition states opening the door to a wide variety of potential applications to peptide elaboration. The feasibility of these traceless chemical ligations is feasible as supported by computation.     

Determination of bromate in drinking water by ultraperformance liquid chromatography-tandem mass spectrometry

Bromate is a byproduct formed as a result of disinfection of bromide-containing source water with ozone or hypochlorite. The International Agency for Research on Cancer has recognized bromate as a possible human carcinogen, thus it is essential to determine in drinking water. Present work highlights a development of sensitive and fast analytical method for bromate determination in drinking water by using ultraperformance liquid chromatography-tandem mass spectrometry. The quality parameters of the developed method were established, obtaining very low limit of detection (0.01 ng/mL), repeatability and reproducibility have been found to be less than 3% in terms of relative standard deviation when analyzing a bromate standard at 0.05 μg/mL with 0.4 min analysis time. Developed method was applied for the analysis of metropolitan and bottled water from Saudi Arabia; 22 samples have been analyzed. Bromate was detected in the metropolitan water samples (from desalinization source) at concentrations ranging between 3.43 and 75.04 ng/mL and in the bottled water samples at concentrations ranging between 2.07 and 21.90 ng/mL. Moreover, in comparison to established analytical methods such as liquid chromatography-tandem mass spectrometry, the proposed method was found to be very sensitive, selective and rapid for the routine analysis of bromate at low level in drinking water.     

Optical band gap and conductivity measurements of polypyrrole-chitosan composite thin films

Electrical conductivity and optical properties of polypyrrole-chitosan（PPy-CHI） conducting polymer composites have been investigated to determine the optical transition characteristics and energy band gap of composite films.The two electrode method and I-V characteristic technique were used to measure the conductivity of the PPy-CHI thin films,and the optical band gap was obtained from their ultraviolet absorption edges.Depending upon experimental parameter,the optical band gap（E_g） was found within 1.30-2.32 eV as estimated from optical absorption data.The band gap of the composite films decreased as the CHI content increased.The room temperature electrical conductivity of PPy-CHI thin films was found in the range of 5.84×10^-7-15.25×10^-7 S·cm^-1 depending on the chitosan content.The thermogravimetry analysis（TGA） showed that the CHI can improve the thermal stability of PPy-CHI composite films.     

Synthesis and Characterization of Aminophosphines,Bis(amino)phosphine Derivatives,and Their Molybdenum(0) Complexes

Functionalized bis(amino)phosphines of the type PhP(NHR)₂ ( 1a–c ) and aminophosphines of the type Ph₂PNHR ( 2a–c ) have been synthesized by treating PhPCl₂ or Ph₂PCl with corresponding primary amines of H₂N-R where R = -CH₂SO₃H, -C₆H₄SO₃H, and benzo-15-crown-5. The molybdenum(0) complex of the aminophosphine ( 3 ) has been obtained by reacting cis-[Mo(CO)₄(bipy)] with aminophosphine ( 2c ). The synthesized aminophosphines, bis(amino)phosphines, and the molybdenum(0) complex have been characterized by IR, ¹H NMR, ³¹P NMR, and MS spectroscopic techniques and by elemental analysis.     

Tri- and pentacalix[4]pyrroles: synthesis, characterization and their use in the extraction of halide salts

Calixpyrrole-based oligomeric compounds were synthesized by "click chemistry" from the corresponding alkyne- and azide-functionalized calix[4]pyrroles. Calix[4]pyrrole 3, possessing an alkyne functional group, was prepared through a mixed condensation of pyrrole with acetone and but-3-ynyl 4-oxopentanoate. Another alkyne-group-containing calix[4]pyrrole 5 was obtained by treatment of 4'-hydroxyphenyl-functionalized calixpyrrole 4 with propargyl bromide. Tetrakis(azidopentyl)-functionalized calix[4]pyrrole 7 was synthesized by reacting NaN(3) with tetrabromopentyltetraethylcalix[4]pyrrole 6, which was prepared through a condensation reaction of pyrrole and 7-bromohept-2-one. Oligomeric calixpyrrole compounds were found to be capable of extracting tetrabutylammonium chloride and fluoride salts from aqueous media. Extraction abilities of the oligomeric compounds were monitored by NMR and UV/Vis spectroscopy and thermogravimetric analysis.     

Time‐Varying Flexible Least Squares for Thermal Desorption of Gases

Time‐varying linear regression via flexible least squares is used to determine temperature‐dependent kinetic parameters during low‐pressure, steady‐state, temperature‐programmed desorption from catalytic surfaces. The flexible least squares approach optimizes time‐varying parameters by minimizing dynamic and measurement discrepancies between a linear theoretical model and experimental data using linear regression. The effectiveness of this approach is demonstrated by calculation of accurate temperature‐dependent activation energies, preexponential factors, and differential conversion functions for the evolution of 3‐methyl‐2‐oxetanone (β‐lactone) during the selective oxidation of isobutane over aluminum phosphomolybdates.