X-ray attenuation around <Emphasis Type="Italic">K</Emphasis>-edge of Zr,Nb, Mo and Pd: A comparative study using proton-induced X-ray emission and <Superscript>241</Superscript>Am gamma rays

Mass attenuation coefficients (μ/ρ) for Zr, Nb, Mo and Pd elements around their K-edges are measured at 14 energies in the range 15.744–28.564 keV using secondary excitation from thin Zr, Nb, Mo, Rh, Pd, Cd and Sn foils. The measurements were carried out at the K _α and K _β energy values of the target elements by two techniques: (1) Proton-induced X-ray emission (PIXE) and (2) ²⁴¹Am (300 mCi) source. In PIXE, 2 MeV proton-excited X-rays were detected by a Si(Li) detector. In the second case, X-rays excited by 59.54 keV photons from the targets were counted by an HPGe detector under a narrow beam good geometry set-up with sufficient shielding. The results are consistent with theoretical values derived from the XCOM package and indicate that the PIXE data have better statistical accuracy.     

Low operating temperature of oxygen gas sensor based on undoped and Cr-doped ZnO films

Undoped and doped ZnO with 1 at.% (atomic percentage) chromium (Cr) was synthesized by RF reactive co-sputtering for oxygen gas sensing applications. The prepared films showed a highly c-oriented phase with a dominant (0 0 2) peak at a Bragg angle of around 34.2°. The operating temperature of the prepared ZnO sensor was around 350 °C and shifted to around 250 °C for the doped ZnO sensor which is lower than that of previously reported work. The sensitivity of the sensor toward oxygen gas was enhanced by doping ZnO with 1 at.% Cr. Good stability and repeatability of the sensor were demonstrated when tested under different concentration of oxygen atmosphere.     

Adsorption and photocatalytic degradation of methylene blue using high surface area titanate nanotubes (TNT) synthesized via hydrothermal method

Removal of methylene blue (MB) via adsorption and photocatalysis using titanate nanotubes (TNTs) with different surface areas were investigated and compared to commercial titanium dioxide (TiO₂) P25 Degussa nanoparticles. The TNTs with surface area ranging from 20 m²/g to 200 m²/g were synthesized via hydrothermal method with different reaction times. TEM imaging confirmed the tubular structure of TNT while XRD spectra indicated all TNTs exhibited anatase crystallinity. Batch adsorption rate showed linearity with surface properties of TNTs, where materials with higher surface area showed higher adsorption rate. The highest MB adsorption (70%) was achieved by TNT24 in 60 min whereas commercial TiO₂ exhibited the lowest adsorption of only 10% after 240 min. Adsorption isotherm studies indicated that adsorption using TNT is better fitted into Langmuir adsorption isotherm than Freundlich isotherm model. Furthermore, TNT24 was able to perform up to 90% removal of MB within 120 min, demonstrating performance that is 2-fold better compared to commercial TiO₂. The high surface area and surface Bronsted acidity are the main reasons for the improvement in MB removal performance exhibited by TNT24. The improvement in surface acidity enhanced the adsorption properties of all the nanotubes prepared in this study.     

Effects of photon field on heat transport through a quantum wire attached to leads

We theoretically investigate photo-thermoelectric transport through a quantum wire in a photon cavity coupled to electron reservoirs with different temperatures. Our approach, based on a quantum master equation, allows us to investigate the influence of a quantized photon field on the heat current and thermoelectric transport in the system. We find that the heat current through the quantum wire is influenced by the photon field resulting in a negative heat current in certain cases. The characteristics of the transport are studied by tuning the ratio, $?{\omega }_{\gamma }/k_{\mathrm{B}}\mathrm{\Delta }T$, between the photon energy, $?{\omega }_{\gamma }$, and the thermal energy, $k_{\mathrm{B}}\mathrm{\Delta }T$. The thermoelectric transport is enhanced by the cavity photons when $k_{\mathrm{B}}\mathrm{\Delta }T>?{\omega }_{\gamma }$. By contrast, if $k_{\mathrm{B}}\mathrm{\Delta }T<?{\omega }_{\gamma }$, the photon field is dominant and a suppression in the thermoelectric transport can be found in the case when the cavity-photon field is close to a resonance with the two lowest one-electron states in the system. Our approach points to a new technique to amplify thermoelectric current in nano-devices.     

Importance of Darcy–Forchheimer porous medium in 3D convective flow of carbon nanotubes

This article explores Darcy–Forchheimer 3D flow of water-based carbon nanomaterial (CNTs). A bi-directional linear stretchable surface has been used to create the flow. Flow in porous space is represented by Darcy–Forchheimer expression. Heat transfer mechanism is explored through convective heating. Results for single-wall (SWCNTs) and multi-wall (MWCNTs) carbon nanotubes have been presented and compared. The reduction of partial differential system into nonlinear ordinary differential system is made through suitable variables. Optimal homotopic scheme is used for solutions development of governing flow problem. Optimal homotopic solution expressions for velocities and temperature are studied through graphs by considering various estimations of physical variables. Skin friction coefficients and local Nusselt number are analyzed through plots. Our findings show that the skin friction coefficients and local Nusselt number are enhanced for larger values of nanoparticles volume fraction.     

Stark Hole-Burning Spectroscopy of Cresylviolet Perchlorate in Amorphous Hosts

Stark hole-burning spectroscopy is used to investigate the effective dipole moment change of cresylviolet perchlorate (CVP) in various glass and polymer hosts such as ethanol:methanol (EM), polyvinyl alcohol (PVA), poly (2-hydroxyethyl) methacrylate (PHEMA), polyvinylbutyral (PVB), and formamide. The strong correlation between effective dipole moment change of the guest molecule and the holeburning efficiencies of the host matrices illustrates the sensitivity of the dipole moment change as a direct measure of guest-host interactions. Hole-burning is found to be more efficient as the dipole induced reaction field increases. This relationship is discussed in terms of the unusual hole-burning mechanism suggested for this molecule. The effective dipole moment change of cresylviolet perchlorate ranges from 0.14 to 0.59 Debye.     

Raman spectroscopic studies of vibrational relaxation and non‐coincidence effect in substituted benzaldehyde binary mixtures

The molecular interaction in the binary mixture of 3‐phenoxybenzaldhyde (3Phbz) and 4‐ethoxybenzaldehyde (4Etob) was analysed in four different solvents. The concentration dependence of vibrational relaxation of the CO stretching band of 3Phbz in different solvents was investigated by varying the concentration of the solute molecule in the solvents by performing Raman spectroscopic measurements. The self‐associated nature and the formation of hydrogen‐bonded complexes in the solute molecule, 4Etob, were considered to analyse the wavenumber separation between the peaks of hydrogen‐bonded and free carbonyl groups. Copyright © 2009 John Wiley & Sons, Ltd.     

Flexible carbon nanostructures with electrospun nickel oxide as a lithium-ion battery anode

Carbon nanostructures (CNS) with high electrical conductivity and unique branched structure of carbon nanotubes combined with NiO nanofibers (NFs) were used as anode for lithium-ion batteries. CNS works as a framework substrate for the anodic conversion reaction of nickel oxide (NiO). Electrochemical performance and behavior of CNS/NiO anodes is compared with the conventional carbon (C)/NiO anodes. CNS/NiO NF-based anode retains high specific capacity under different current densities compared to C/NiO anode. Moreover, specific capacity as high as 450 mAh/g for CNS/NiO NF anode is observed compared to only 90 mAh/g for C/NiO NFs using a current density of 500 mA/g after 500 cycles. This improved performance is attributed to the highly conductive network of CNS leading to efficient charge transfer. The high porosity, electrical conductivity as well as the branched and networked nature of CNS reveal to be of critical importance to allow the electrochemical conversion reactions.     

Antibacterial Activity of a Novel Oligosaccharide from Streptomyces californics against Erwinia carotovora subsp. Carotovora

The present study aims to characterize and predict models for antibacterial activity of a novel oligosaccharide from Streptomyces californics against Erwinia carotovora subsp. carotovora using an adaptive neuro-fuzzy inference system and an artificial neural network. The mathematical predication models were used to determine the optimal conditions to produce oligosaccharide and determine the relationship between the factors (pH, temperature, and time). The characteristics of the purified antibacterial agent were determined using ultraviolet spectroscopy (UV/Vis), infrared spectroscopy (FT-IR), nuclear magnetic resonance spectroscopy (¹H- and ¹³C-NMR), and mass spectrometry (MS). The best performances for the model were 39.45 and 35.16 recorded at epoch 1 for E. carotovora Erw₅ and E. carotovora EMCC 1687, respectively. The coefficient (R²) of the training was more than 0.90. The highest antimicrobial production was recorded after 9 days at 25 °C and a pH of 6.2, at which more than 17 mm of the inhibition zone was obtained. The mass spectrum of antimicrobial agent (peak at R.T. = 3.433 of fraction 6) recorded two molecular ion peaks at m/z = 703.70 and m/z = 338.30, corresponding to molecular weights of 703.70 and 338.30 g/mol, respectively. The two molecular ion peaks matched well with the molecular formulas C₂₉H₅₃NO₁₈ and C₁₄H₂₆O₉, respectively, which were obtained from the elemental analysis result. A novel oligosaccharide from Streptomyces californics with potential activity against E. carotovora EMCC 1687 and E. carotovora Erw₅ was successfully isolated, purified, and characterized.