4-(4'-Methyltetrafluorophenyl)-2,3,5,6-tetrafluorobenzyl bromide: a new electrophoric derivatizing reagent

Commercially-available 4,4'-dimethyloctafluorobiphenyl was converted in a single step to 4-(4'-methyltetrafluorophenyl)-2,3,5,6-tetrafluorobenzyl bromide (MTFP-TFBBr) for the purpose of providing a new electrophoric derivatizing reagent. When reacted with this reagent, 2-fluoro-O6-(2'-hydroxyethyl)hypoxanthine, a model analyte, gave a mixture of isomeric products (apparently substituted at N7 and N9, analogous to its known reaction with pentafluorobenzyl bromide), and 53 femtograms of the mixture was detected at S/N = 10 by gas chromatography electron capture mass spectrometry (GC-EC-MS). As intended, the volatility of the MTFB-TFBBr derivative was much less (two-fold) than that of the corresponding pentafluorobenzyl derivative. It is anticipated that MTFB-TFBBr sometimes will be useful in providing an electrophoric derivative that encounters less background noise in analysis by electrophore derivatization/GC-EC-MS.     

Dendritic cell internalization of foam-structured fluorescent mesoporous silica nanoparticles

In this paper, foam-structured fluorescent mesoporous silica nanoparticles (FMSNs) are produced in a sol-gel method with the introduction of a phosphonate functional group. It is found that the phosphonate functionalized FMSNs with the foam structure minimizes the aggregation of FMSNs in solution. The average particle size of the FMSNs without and with phosphonate functionalization is 46.3 ± 5 nm and 60.5 ± 8 nm in diameter, respectively. The latter one exhibits higher fluorophore loading capacity (~67 ± 2.5%). The excitation wavelength (λ(ex)) of FMSNs is observed at 526 nm, approximate 12 nm larger in the Stoke-shift compared to the free organic dye at 494/514 nm. Furthermore, the photostability of the hydrophobic fluorophore is greatly improved by the FMSNs with the foam structure. In addition, the dose-dependent nature of FMSN uptake is assessed for the immune cells, the bone marrow-derived dendritic immune cells (BMDCs). Our results indicate that approximately 42% of BMDCs are able to take up foam-structured FMSNs (>5 μg/ml) without decreasing the viability of BMDCs. Thus, the phosphonate functionalized FMSNs with the foam structure are suitable to be used for many biomedical applications, especially in cell tracking.     

Longitudinal distribution of trace elements in the atmosphere of an industrial area from neutron activation analysis

Industrial units play a significant role in atmospheric pollution. Industrial exhausts deteriorate the atmospheric quality causing unhygienic environment for the people working in the vicinity. This work presents a study of the longitudinal distribution of trace elements of the Sheikhupura industrial area. Three kinds of distribution patterns were observed and are discussed in detail. The results are based on the neutron activation analysis of 16 trace elements.     

Oxidations with alkaline permanganate using monovalent thallium for the back-titration: Determination of iodate,iodide and ferrocyanide

Iodate, iodide, iodine and ferrocyanide can be estimated by oxidation with KmnO₄ in alkaline media; the excess is back-titrated with TI⁷. I^- and I₂ are oxidized to IO₄^- in the presence of Ba⁺² ions but only to IO₃^- in absence of such ions. The direct titration of IO₃^-, I^- with KmnO₄ proved valueless.Ferrocyanide is oxidized by KmnO₄ in alkaline solutions and MnO₂ is formed. In the presence of telluric acid and 0.025–0.1 N NaOH satisfactory results are obtained. Reduction of MnO₄^- with ferrocyanide gives MnO₄^-2 and the results are variable, depending on the rate of adding the ferrocyanide.     

Capillary gas chromatographic analysis of pyrrolidinedithiocarbamate metal chelates

Pyrrolidinedithiocarbamate (PDTC) chelates of Zn(II), Cu(II), Ni(II), Co(III), Fe(III), Mn(II), Cr(III), and VO(II) were analysed by capillary GC on a DB-1701 column (30 m x 0.25 mm id) with flame ionisation detection (FID). Linear calibrations were attained within "1-30 microg/mL" for Ni(II), Fe(III), Mn(II), Cr(III), Cu(II), and VO(II), and within "2-50 microg/mL" for Co(III) and Zn(II). The limits of detection were in the "150-500 ng/mL" range, corresponding to 15-50 pg amounts reaching the FID system. The optimised method was applied to the determination of Cu(II) and Ni(II) in coins, and that of Zn(II), Cu(II), Ni(II), Fe(III), Mn(II), Cr(III), and VO(II) in pharmaceutical preparations with relative standard deviations within 1.1-5.2%. The results obtained are in good agreement with sewage water samples and the declared values for the pharmaceutical formulations, or with the results of AAS of metal contents in coins, pharmaceutical preparations, and sewage water samples.     

Incorporation of ferrocene into polypyrrole films via an ionic adduct with boron trifluoride

1-(Ferrocenyl)ethanol has been immobilized within polypyrrole films during their electrochemical deposition, or following their deposition, via its adduct with boron trifluoride. Dissociation of H⁺ from this adduct, formed in a solution of boron trifluoride diethyl ether (BFEE) in acetonitrile, produces an anion that can act as a counterion for oxidized polypyrrole. Its subsequent hydrolysis produces a polypyrrole film containing neutral 1-(ferrocenyl)ethanol which was found to be strongly retained. In addition to producing a novel type of polypyrrole–ferrocene composite, this work provides clear evidence to support the efficacy of this methodology for the incorporation of neutral species within conducting polymer films.     

N‐(Ferrocenecarbonyl)‐N′‐(quinolin‐8‐yl)thio­urea

In the title compound, [Fe(C₅H₅)(C₁₆H₁₂N₃OS)], the 8‐am­inoquinoline and acyl­thio­urea moieties are almost planar. There are two perpendicular arrangements of the mol­ecules in the crystal with slightly different conformations. The two cyclo­penta­dienyl rings in each mol­ecule are parallel and eclipsed.     

On the natural convection of nanofluids in diverse shapes of enclosures: an exhaustive review

Journal of Thermal Analysis and Calorimetry - The ultimate goal of the present review paper is to summarize and discuss the findings of the most recently published literature on natural convection...     

Flow and thermal study of MHD Casson fluid past a moving stretching porous wedge

Journal of Thermal Analysis and Calorimetry - This research provides the analysis of an analytical method named Homotopy analysis method which is applied to examine the series solutions/results on...     

Binder-less and free-standing Co–Fe metal nanoparticles-decorated PVdF-HFP nanofiber membrane as an electrochemical probe for enzyme-less glucose sensors

Co–Fe bimetallic nanoparticles-affixed polyvinylidene fluoride-co-hexafluoropropylene (PVdF-HFP) nanofiber membrane is fabricated using the electrospinning and chemical reduction techniques. The semicrystalline polymeric backbone decorated with the highly crystalline Co–Fe bimetallic nanoparticles enunciates the mechanical integrity, while the incessant and swift electron mobility is articulated with the consistent dissemination of bimetallic nanoparticles on the intersected and multi-layered polymeric nanofibers. The diffusion and adsorption of glucose are expedited in the extended cavities and porosities of as-formulated polymeric nanofibers, maximizing the glucose utilization efficacy, while the uniformly implanted Co⁴⁺/Fe³⁺ active centers on PVdF-HFP nanofibers maximize the electrocatalytic activity toward glucose oxidation under alkaline regimes. Thus, the combinative sorts including nanofiber and nanocomposite strategies of PVdF-HFP/Co–Fe membrane assimilate the enzyme-less electrochemical glucose detection concerts of high sensitivity (375.01 μA mM^?1 cm^?2), low limit of detection (0.65 μm), and wide linear range (0.001 to 8 mM), outfitting the erstwhile enzyme-less glucose detection reports. Additionally, the endowments of high selectivity and real sample glucose-sensing analyses of PVdF-HFP/Co–Fe along with the binder-less and free-standing characteristics construct the state-of-the-art paradigm for the evolution of affordable enzyme-less electrochemical glucose sensors.