Batch and continuous fixed-bed column biosorption of thorium(IV) from aqueous solutions: equilibrium and dynamic modeling

Biosorption of thorium(IV) from aqueous solution by Cystoseira indica alga was investigated in batch and fixed-bed column experiments. In the batch study the effects of pH and initial concentration were investigated. The optimum pH for Th(IV) biosorption was found to be 3.5. The experimental isotherms obtained at different pH conditions were analyzed using three two-parameter models and three three-parameter models. Among the two-parameter models the Langmuir model and among the three-parameter models the Redlich–Peterson model vividly described the equilibrium data. The results showed that C. indica alga is a homogeneous biosorbent and Th(IV) biosorption is a favorable and physical process. The maximum biosorption capacity from the Langmuir model was 151.3, 195.7 and 120.6 mg/g at pH 2.5, 3.5 and 4.5, respectively. The continuous isotherm obtained from the column data was modeled by the Langmuir model and the maximum biosorption capacity was 283.8 mg/g. The experimental data were fitted by the use of an analytical and a numerical model, namely Clark and mass transfer models. The results showed that the mass transfer model adequately described the experimental data. Sensitivity analysis revealed that the value of k _in has more effect than the axial dispersion coefficient (D _z) on the shape of breakthrough curve.     

Simultaneous determination of nine lignans from Schisandra chinensis extract using ultra‐performance liquid chromatography with tandem mass spectrometry in rat plasma,urine, and gastrointestinal tract samples: Application to the pharmacokinetic study of Schisandra chinensis

The fruit of Schisandra chinensis is a well‐known herbal medicine and dietary supplement due to a variety of biological activities including antihepatotoxic and antihyperlipidemic activities. However, the simultaneous validation methodology and pharmacokinetic investigation of nine lignans of S. chinensis extract in biological samples have not been proved yet. Thus, the present study was undertaken to develop the proper sample preparation method and simultaneous analytical method of schisandrol A, gomisin J, schisandrol B, tigloylgomisin H, angeloylgomisin H, schisandrin A, schisandrin B, gomisin N, and schisandrin C in the hexane‐soluble extract of S. chinensis to apply for the pharmacokinetic study in rats. All intra‐ and interprecisions of nine lignans were below 13.7% and accuracies were 85.1–115% and it is enough to evaluate the pharmacokinetic parameters after both intravenous and oral administration of hexane‐soluble extract of S. chinensis to rats.     

Construction of a portable sample preparation device with a magnetic poly(methacrylic acid‐co‐ethylene dimethacrylate) monolith as the extraction medium and its application in the enrichment of UV filters in water samples

A portable sample preparation device with a magnetic polymer monolith as the extraction medium was constructed. The monolith was synthesized by polymerizing methacrylic acid and ethylene dimethacrylate around a cylindrical magnet. In this way, the monolith with a magnetic core could be readily attached to the extraction device by magnetism. The constructed device was evaluated for the enrichment of UV filters in water samples, followed by high‐performance liquid chromatographic analysis. The extraction efficiency for the targets was satisfactory with no matrix interference. Good linearities were obtained for the UV filters with the correlation coefficients >0.9986. The limits of detection and quantification for the UV filters were 0.3–0.8 and 1.0–2.4 ng/mL, respectively. The recoveries of the UV filters from the spiked water samples at the concentration of 100 ng/mL were 95.3–101.7%, with relative standard deviations <10%. Accordingly, the proposed portable device was demonstrated to be suitable for on‐site simultaneous sampling, purification, and preconcentration within a single step.     

5‐O‐Caffeoylshikimic acid from Solanum somalense leaves: Advantage of centrifugal partition chromatography over conventional column chromatography

Solanum somalense leaves, used in Djibouti for their medicinal properties, were extracted by MeOH. Because of the high polyphenol and flavonoid contents of the extract, respectively, determined at 80.80 ± 2.13 mg gallic acid equivalent/g dry weight and 24.4 ± 1.01 mg quercetin equivalent/g dry weight, the isolation and purification of the main polyphenols were carried out by silica gel column chromatography and centrifugal partition chromatography. Column chromatography led to 11 enriched fractions requiring further purification, while centrifugal partition chromatography allowed the easy recovery of the main compound of the extract. In a solvent system composed of CHCl₃/MeOH/H₂O (9.5:10:5), 21.8 mg of this compound at 97% purity was obtained leading to a yield of 2.63%. Its structure was established as 5‐O‐caffeoylshikimic acid by mass spectrometry and NMR spectroscopy. This work shows that S. somalense leaves contain very high level of 5‐O‐caffeoylshikimic acid (0.74% dry weight), making it a potential source of production of this secondary metabolite that is not commonly found in nature but could be partly responsible of the medicinal properties of S. somalense leaves.     

Fitting formula for the injection volume of a gas chromatograph for radio‐xenon sampling in the lower troposphere

GC is usually used for xenon concentration and radon removal in the International Monitoring System of the Comprehensive Nuclear‐Test‐Ban Treaty. In a gas chromatograph, the injection volume is defined to calculate the column capacity. In this paper, the injection volume was investigated and a fitting formula for the injection volume was derived and discussed subsequently. As a consequence, the xenon injection volume exponentially decreased with the column temperature increased, but exponentially increased as the flow rate increased.     

Determination of cysteine,homocysteine, cystine,and homocystine in biological fluids by HPLC using fluorosurfactant‐capped gold nanoparticles as postcolumn colorimetric reagents

We have demonstrated for the first time the suitability of fluorosurfactant‐capped spherical gold nanoparticles as HPLC postcolumn colorimetric reagents for the direct assay of cysteine, homocysteine, cystine, and homocystine. The success of this work was based on the use of an on‐line tris(2‐carboxyethyl)phosphine reduction column for cystine and homocystine. Several parameters affecting the separation efficiency and the postcolumn colorimetric detection were thoroughly investigated. Under the optimized conditions, cysteine, homocysteine, cystine, and homocystine in human urine and plasma samples were determined. Detection limits for cysteine, homocysteine, cystine, and homocystine ranged from 0.16–0.49 μM. The accuracy in terms of recoveries ranged between 94.0–102.1%. This proposed method was rapid, inexpensive, and simple.     

Multiresidue method for the fast determination of pesticides in nutraceutical products (Camellia sinensis) by GC coupled to triple quadrupole MS

A method based on QuEChERS (quick, easy, cheap, effective, rugged, and safe) has been developed and validated for the determination and quantification of more than 140 pesticides in nutraceutical products obtained from green tea (Camellia sinensis). Extraction was performed with acidified acetonitrile (acetic acid 1%, v/v) and a clean‐up step using primary secondary amine (50 mg), graphitized black carbon (100 mg) and magnesium sulfate (200 mg) was needed. Pesticide determination was achieved utilizing GC coupled to triple quadrupole MS/MS using the selective‐reaction monitoring mode. The total run time was 23 min. Pesticides were quantified using matrix‐matched calibration. Recoveries ranged from 70 to 120% and relative SD was lower than 25% at 10, 50, and 100 μg/kg. LOQs were lower than 10 μg/kg. 148 pesticides were validated. The validated method was applied to commercial nutraceutical products, detecting 4,4‐dichlorobenzophenone (28 μg/kg), o,p′‐dicofol (38 μg/kg) and p,p‐dicofol (44 μg/kg) in a few samples.     

Ultra‐trace level determination of diquat and paraquat residues in surface and drinking water using ion‐pair liquid chromatography with tandem mass spectrometry: A comparison of direct injection and solid‐phase extraction methods

Direct injection and solid‐phase extraction methods for the determination of diquat and paraquat in surface and drinking water were developed using liquid chromatography with tandem mass spectrometry. The signal intensities of analytes based on six ion‐pairing reagents were compared with each other, and 12.5 mM nonafluoropentanoic acid was selected as the best suited amongst them. A clean‐up method was developed using Oasis hydrophilic–lipophilic balance; this was compared to the direct injection method, with respect to limits of detection, interference, precision, and accuracy. Limits of quantification of diquat and paraquat were 0.03 and 0.01 μg/L using the direct injection method, and 0.002 and 0.001 μg/L using the hydrophilic–lipophilic balance method. When the hydrophilic–lipophilic balance method was used to analyze target compounds in 114 surface water and 30 drinking water samples, paraquat and diquat were detected within a concentration range of 0.001–0.12 and 0.002–0.038 μg/L in surface water, respectively. When the direct injection method was used to analyze target compounds in the same samples, the detected concentrations of paraquat and diquat were within 25% in samples being >0.015 μg/L using the hydrophilic–lipophilic balance method. The liquid chromatography with tandem mass spectrometry method using direct injection can thus be used for routine monitoring of paraquat and diquat in surface and drinking water.     

Extraction of methocarbamol from human plasma with a polypyrrole/multiwalled carbon nanotubes composite decorated with magnetic nanoparticles as an adsorbent followed by electrospray ionization ion mobility spectrometry detection†

In this work, a polypyrrole/multiwalled carbon nanotubes composite decorated with Fe₃O₄ nanoparticles was chemically synthesized and applied as a novel adsorbent for the extraction of methocarbamol from human plasma. Electrospray ionization ion mobility spectrometry was used for the determination of the analyte. The properties of the magnetic‐modified adsorbent were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform IR spectroscopy, and X‐ray diffraction. The effects of experimental parameters on the extraction efficiency of the sorbent were investigated. Under the optimized conditions, the linear dynamic range was found to be 2–150 ng/mL with the detection limit of 0.9 ng/mL. The relative standard deviation was 5.3% for three replicate measurements of methocarbamol in plasma sample. The extraction efficiency of the sorbent for the determination of different drugs with various polarities was also compared to that of Fe₃O₄‐polypyrrole and Fe₃O₄‐multiwalled carbon nanotubes sorbents. Finally, the method was used for the determination of methocarbamol in blood samples.     

Loading characteristics and chemical stability of headgroup‐functionalized poly(ethylene glycol)‐lipid ligand tethers on polypropylene capillary‐channeled polymer fibers

Polypropylene capillary‐channeled polymer fibers have been modified by adsorption of headgroup‐functionalized poly(ethylene glycol)‐lipids to generate a species‐specific stationary phase. In order to study ligand binding characteristics, a fluorescein‐labeled poly(ethylene glycol)‐lipid was used as a model system. Breakthrough curves and frontal analysis were employed to characterize the surface loading characteristics across a range of lipid concentrations and mobile phase flow rates. Efficient mass transfer and fluid transport yield a linear adsorption isotherm up to the maximum loading concentration of 3 mg/mL, at a linear velocity of 57.1 mm/s. Under these conditions, the dynamic binding capacity was found to be 1.52 mg/g of fiber support. Variation of the linear velocity from 8.6 to 57.1 mm/s showed only small changes in breakthrough volume. The maximum capacity of 1.8 mg/g is found under conditions of a load velocity of 34.2 mm/s and a concentration of 3 mg/mL lipid. Exposure of the lipid modified fibers to several challenge solvents reveals a chemically robust system, with only 50% acetonitrile and hexanes able to disrupt the lipid adsorption. The straightforward capillary‐channeled polymer fiber surface modification with headgroup‐functionalized lipids provides both a diverse yet practically robust ligand tethering system.