Mixtures of antidepressant amphiphilic drug imipramine hydrochloride and anionic surfactant: Micellar and thermodynamic investigation

Aggregation as well as thermodynamic behavior of amphiphilic imipramine hydrochloride (IMH) drug (antidepressant) and anionic surfactant (sodium dodecyl sulfate [NaDS] as well as sodium dodecylbenzenesulfonate [NaDBS]) mixtures as a function of solution composition in aqueous solutions have been evaluated by conductometry method at different temperatures. Surfactant (NaDS and NaDBS) employed in the current study is anionic in nature. Various theoretical models such as Clint, Rubingh, Motomura, and Rodenas were employed to gain information regarding the type of interaction between the components in the solution mixtures. The value of micellar mole fraction evaluated by different utilized models is found to be more for IMH‐NaDBS mixtures in comparison with IMH‐NaDS mixtures, signifying that participation of NaDBS is more in mixed micelles as compared with NaDS. Owing to the different charge of employed drug and surfactant, which sources high synergistic results in the mixed system comparative to the possessions of their pure compounds, means here anionic surfactants were elected in favor of the quantitation of cationic drug. The value of interaction parameters (β) was also evaluated by employing the Rubingh's model. The values of Gibbs free energy (?G⁰_m) for all systems attained to be negative in all studied systems showing that the systems are spontaneous in nature.     

Carpet oscillator: A new megastable nonlinear oscillator with infinite islands of self-excited and hidden attractors

Polarisation of the particle spin can be an important problem for different plasmas. In this article, the contribution of the electron spin on the growth rate of the temperature anisotropy of electromagnetic instabilities has been investigated. Results show that polarisation of the electron spin will restrict the instability growth rate while instability can survive due to the spin-depolarised electrons even when the requested temperature anisotropy is vanished. Instability can reach the damping state exponentially due to the spin-polarised electrons while it can grow linearly due to the spin-depolarised (the semi-classical) electrons.     

Self-consistent treatment of spin and magnetization dynamic effect in spin transfer switching

The effect of itinerant spin moment (m) dynamic in spin transfer switching has been ignored in most previous theoretical studies of the magnetization (M) dynamics. Thus in this paper, we proposed a more refined micromagnetic model of spin transfer switching that takes into account in a self-consistent manner of the coupled m and M dynamics. The numerical results obtained from this model further shed insight on the switching profiles of m and M, both of which show particular sensitivity to parameters such as the anisotropy field, the spin torque field, and the initial deviation between m and M.     

Numerical calculations of temperature distribution of double layer metallic surface treated by laser beams

A mathematical model of laser beam treatment of double layer alloys (Ni/Fe, Al/Fe and Cr/Fe systems) describing the effect of laser beam on different physical and geometrical parameters of coated layer system has been adapted. The numerical solutions of the non-homogeneous heat-transport differential equation could estimate the temperature of the treated region.The suggested model allows investigation of the temperature distribution as a function of treated surface and laser parameters. The physical parameters of the treated materials were taken as functions of temperature due to the change in the temperature of the treated double layer materials.     

Electrical and optical characteristics of porous silicon impregnated with LaF3 by a novel chemical bath technique

The structural, electrical and optical characteristics of porous silicon (PS) due to the impregnation of LaF₃ into PS by a novel chemical-bath deposition (CBD) technique have been investigated in this article. Without removing the PS from the anodization chamber the impregnation with LaF₃ has been done by reacting LaCl₃ with HF in the same chamber at room temperature. The impregnation of LaF₃ was confirmed by the SEM on the cross-section of the LaF₃/PS/Si system and EDX. The modification of PS surface by LaF₃ had direct influence on the electrical and optical properties of PS. Electrical properties of Ag/LaF₃/PS/p-Si/Ag structures were studied through the current-voltage (I-V) and capacitance-voltage (C-V) characteristics. Formation of metal-insulator-semiconductor (MIS) diode was evident whose forward current increased with annealing. A diode factor of about 2.4 has been obtained for the annealed heterostructure indicating a high density of trap states. The C⁻²-V curves of all samples showed negative flat band voltage of around −2 V confirming a large number of fixed positive charges in the LaF₃. The photoluminescence (PL) intensity of the LaF₃-impregnated PS showed aging for the as-deposited samples, but when annealed PS structure recovered the PL intensity. Experimental results show that the optimized chemical bath passivation process for the LaF₃ on porous silicon could enable the porous silicon to be an important material for photonic application.     

Appraisal of radioactivity and associated radiation hazards in sand samples of four rivers of Punjab province, Pakistan

Natural and anthropogenic radioactivity of sand and water samples collected from the four big rivers of Punjab province, Pakistan, was measured using a high-purity germanium detector coupled with a high resolution multichannel analyser. The average concentration of the naturally occurring radionuclides (226)Ra, (232)Th and (40)K in all the sand samples from the rivers Jhelum, Chenab, Ravi and Indus was found to be 22±0.6, 36±1 and 287±10 Bq kg (-1), respectively, while the concentration of the anthropogenic radionuclide (137)Cs was found to be below the minimum detectable activity, i.e. ~1.2 Bq?kg (-1). All the sand samples have Ra(eq) concentrations lower than the limit of 370 Bq kg (-1). Indoor (H (in)) and outdoor (H (out)) radiation hazard indices were calculated for the samples to assess the radiation hazards arising due to the use of this sand in construction, and were found to be less than unity in the study area. Calculated values of the absorbed dose rate were less than the typical world average value of 59 nGy h (-1), and the annual effective dose rate was also less than the typical world value of 70 μSv, except in the Indus river, in which it is slightly higher then the world average. Results show that the measured values are comparable with other global radioactivity measurements. None of the studied riverbeds was considered a radiological hazard, and their sand can be safely used in construction.     

Anisotropic Inflationary Scenario Via Generalized Chaplygin Gas Model

We investigate generalized chaplygin gas for warm inflationary scenario in the context of locally rotationally symmetric Bianchi type I universe model.We assume two different cases of dissipative coefficient,i.e.,constant as well as function of scalar field.We construct dynamical equations as well as a relationship between scalar and radiation energy densities under slow-roll approximation.We also derive slow-roll parameters,scalar and tensor power spectra,scalar spectral index,tensor to scalar ratio for analyzing inflationary background during high dissipative regime.We also use the WMAP7 data for the discussion of our parameters.     

Characteristics of electron beam evaporated nanocrystalline SnO2 thin films annealed in air

Tin oxide (SnO₂) thin films (about 200 nm thick) have been deposited by electron beam evaporation followed by annealing in air at 350-550 °C for two hours. Optical, electrical and structural properties were studied as a function of annealing temperature. The as-deposited film is amorphous, while all other annealed films are crystalline (having tetragonal structure). XRD suggest that the films are composed of nanoparticles of 5-10 nm. Raman analysis and optical measurements suggest quantum confinement effects that are enhanced with annealing temperature. For instance, Raman peaks of the as-deposited films are blue-shifted as compared to those for bulk SnO₂. Blue shift becomes more pronounced with annealing temperature. Optical band gap energy of amorphous SnO₂ film is 3.61 eV, which increases to about 4.22 eV after crystallization. Two orders of magnitude decrease in resistivity is observed after annealing at 350-400 °C due to structural ordering and crystallization. The resistivity, however, increases slightly with annealing temperature above 400 °C, possibly due to improvement in stoichiometry and associated decrease in charge carrier density.     

Low operating temperature of oxygen gas sensor based on undoped and Cr-doped ZnO films

Undoped and doped ZnO with 1 at.% (atomic percentage) chromium (Cr) was synthesized by RF reactive co-sputtering for oxygen gas sensing applications. The prepared films showed a highly c-oriented phase with a dominant (0 0 2) peak at a Bragg angle of around 34.2°. The operating temperature of the prepared ZnO sensor was around 350 °C and shifted to around 250 °C for the doped ZnO sensor which is lower than that of previously reported work. The sensitivity of the sensor toward oxygen gas was enhanced by doping ZnO with 1 at.% Cr. Good stability and repeatability of the sensor were demonstrated when tested under different concentration of oxygen atmosphere.     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.