Interaction of Metal–Dipeptide Complex with Ninhydrin in the Absence and Presence of Conventional CTAB Surfactant

The present work is aimed at studying the interaction between copper-glycyltyrosine [(Cu(II)-Gly-Tyr)]⁺ and ninhydrin in water and in micelles formed by cetyltrimethylammonium bromide (CTAB) using spectrophometric measurements at 80°C and pH 5.0. The order of reaction remains the same in the two systems, that is, first- and fractional-order kinetics with respect to [Cu(II)-Gly-Tyr]⁺ and [ninhydrin], respectively, in the excess of ninhydrin over [Cu(II)-Gly-Tyr]⁺. It was observed that the product formed is same in both the media. The reaction is catalyzed by CTAB, and the maximum rate enhancement is about three fold. Quantitative kinetic analysis of k_ψ–[CTAB] data was explained in terms of pseudo-phase of the micelles (assuming the association/incorporation of both the reactants at the micellar surface).     

Polymers-Copolymer as Flow Improvers for Fuel Oils and Their Electrical Conductivity

In order to find efficient cold flow improvers for fuel oil, polymethylmethacrylate (PMMA), polystyrene (PS), and a copolymer [styrene (S)–methylmethacrylate (MMA) were prepared. The structure of these polymers and the copolymer were characterized by infrared spectral analysis and their molecular weights were measured. These polymers-copolymer were used as additives for fuel oils in order to lower their pour point. Accordingly, they were evaluated as flow improvers for fuel oil. The results indicated that PMMA possesses less performance as pour point depressant. While the addition of PS and the copolymer (S–MMA) yield excellent pour point depressants for fuel oil. Upon studying the prepared additives and their properties, it was found that the electrical properties of the copolymer were changed due to the presence of polar ion in MMA effect on the electrical properties. The highest electrical conductivity was found when styrene:MMA molar ratio was 1:1.     

Flow-injection determination of total iron in freshwater samples with neutralisation chemiluminescence

A flow-injection chemiluminescence method has been established for the determination of total iron in freshwater samples. The enhanced chemiluminescence emission was caused by the iron(II) from the neutralisation reaction of hydrochloric acid and sodium hydroxide without the use of any chemiluminescent reagent. The calibration graph was linear in the concentration range of 2.8–560 µg L^?1 (r ² = 0.9983, n = 8), with relative standard deviation (RSD; n = 4) in the range of 0.8–2.6%. The limit of detection (S/N = 3) was 0.56 µg L^?1 with injection throughput of 180 h^?1. The effect of common anions and cations were studied over their environmentally relevant concentrations in freshwaters. The method was successfully applied to determine total iron in freshwater samples. Iron(III) was reduced to iron(II) by using hydroxylammonium chloride. The proposed method was compared with spectrophotometric method and there was no significant difference between the two methods at the 95% confidence level (t-test). Analysis of river water (certified reference material SLRS-4) for iron(II), after reduction of iron(III) with hydroxylammonium chloride, gave good results (2.17 ± 0.22 µM compared with the certificate value of 1.85 ± 0.1 µM).     

Determination of phosphate in freshwater samples by flow-injection with lucigenin chemiluminescence

Lucigenin chemiluminescence (CL) in conjunction with flow-injection analysis (FIA) is used for the determination of phosphate in freshwater samples. The procedure is based on the formation of molybdophosphoric heteropoly acid (MoP–HPA) by the reaction of phosphate and ammonium molybdate under acidic conditions. CL emission was observed as a result of oxidation of lucigenin in aqueous sodium hydroxide solution in the presence of MoP–HPA. Calibration was linear up to 500?µg?L^?1 (r ^2?=?0.9998; n?=?8), with a detection limit (S/N?=?3) of 0.95?µg?L^?1. An injection throughput of 120 h^?1, and relative standard deviation (RSD; n?=?4) of 1.3–3.2% were achieved in the concentration range studied. An on-line chelating column was used to remove interfering cations. The method was applied to freshwater samples, and the results (51?±?1.0 – 107?±?2.0?µg?L^?1) did not differ significantly from results obtained using a spectrophotometric method (52.5?±?1.0 – 102?±?2.0?µg?L^?1) at 95% confidence level (t-test).     

Assessment of the polluting effects of the Iponri-Alaka Canal,Lagos State,Nigeria

ABSTRACT

The polluting effects of Iponri-Alaka Canal in Surulere area of Lagos State on the environment have been studied using six sampling points. The study aimed at assessing the effects of exposure to pollutants on humans and other life forms. The quality of air, wastewater and sediments was assessed between March and August 2017. The concentrations of SO₂ and H₂S were measured using MSA Altair 5X. Temperature, pH and DO were measured in-situ using Thermometer, pH meter and Winkler method, respectively. TSS, TDS, TS, TA, TH, BOD, chloride Cl^?, PO₄^3-, SO₄^2- and NO₃^? were determined using appropriate standard methods in the laboratory. EC and some heavy metals (Cr, Pb, Mn, Cd and Ni) concentrations were determined using conductivity meter and Atomic Absorption Spectroscopy, respectively. The results showed that pH, TS, DO and TH were well within the WHO and FEPA maximum limits. EC, SO₄^2- and TDS were observed to be higher than guideline values only at one sampling point. The TSS, BOD, TA, NO₃^? and PO₄^3- were higher than WHO and FEPA guideline limits at all sampling points. Cr was seen to be within, while Pb and Mn were higher than WHO and FEPA guideline values. Cd was higher than guideline values only at two sampling points. Ni was below detection concentration at all the sampling points.

The concentration of SO₂ was seen to be higher than WHO and NESREA guideline values at two sampling points, while H₂S concentration was higher than WHO limit at all the six sampling points.     

Solid‐State Structural Transformations and Photoreactivity of 1D‐Ladder Coordination Polymers of PbII

An attempt has been made to design double‐stranded ladder‐like coordination polymers (CPs) of hemidirected Pb^II. Four CPs, [Pb(μ‐bpe)(O₂C‐C₆H₅)₂] ? 2H₂O ( 1 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐C₆H₅)₂(O₂C‐C₆H₅)₂] ( 2 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐p‐Tol)₂(O₂C‐p‐Tol)₂] ? 1.5 H₂O ( 3 ) and [Pb₂(μ‐bpe)₂(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 4 ) (bpe=1,2‐bis(4′‐pyridyl)ethylene), have been synthesised and investigated for their solid‐state photoreactivity. CPs 2 – 4 , having a parallel orientation of bpe molecules in their ladder structures and being bridged by carboxylates, were found to be photoreactive, whereas CP 1 is a linear one‐dimensional (1D) CP with guest water molecules aggregating to form a hydrogen‐bonded 1D structure. The linear strands of 1 were found to pair up upon eliminating lattice water molecules by heating, which led to the solid‐state structural transformation of photostable linear 1D CP 1 into photoreactive ladder CP 2 . In the construction of the double‐stranded ladder‐like structures, the parallel alignment of C?C bonds in 2 – 4 is dictated by the chelating and μ₂‐η²:η¹ bridging modes of the benzoate and toluate ligands. The role of solvents in the formation of such double‐stranded ladder‐like structures has also been investigated. A single‐crystal‐to‐single‐crystal transformation occurred when 4 was irradiated under UV light to form [Pb₂(rctt‐tpcb)(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 5 ).     

Vasicine as tridentate ligand for enantioselective addition of diethylzinc to aldehydes

The first report of natural l-vasicine as tridentate chiral ligand for the enantioselective addition of diethylzinc to a variety of aliphatic and aromatic aldehydes is described. The ligand generates R-isomer of the secondary alcohols upto 98% ee. The quinazoline structure possibly imparts rigidity to the ligand and hence, consistently high enantioselectivity. The importance of the quinazoline ring was also supported by the reaction with other related ligands, partially lacking the structural features, thus resulting in poor enantioselectivity.     

Study of the Interaction Between Promazine Hydrochloride and Surfactant (Conventional/Gemini) Mixtures at Different Temperatures

In the present paper, the micellization of an amphiphilic drug, promazine hydrochloride, and gemini surfactants (16-s-16) with s = 4–6 and the monomeric hexadecyltrimethylammonium bromide (CTAB) counterparts has been examined conductometrically in the pure and mixed states in aqueous solutions at different compositions and temperatures (298.15–308.15 K). Dicationic gemini surfactants provide much better environment for the micellization behavior than the corresponding monocationic counterpart CTAB. The critical micelle concentration (cmc) values are lower than the cmc for ideal mixing, cmc ^id, suggesting attractive interactions between the two components in mixed micelles. The micellar mole fractions of surfactants, evaluated by different models, show greater contributions of surfactants in mixed micelles and increase with increasing concentrations of these surfactants. The negative values of β suggest synergism in the mixtures, which is highly beneficial as it reduces the total amount of surfactants required in a particular application, leading to reductions of cost and environmental impact. Activity coefficients (f ₁ and f ₂) are always less than unity showing nonideality in the systems. The data have been also used for evaluation of thermodynamic parameters.     

Regioselective synthesis of C-2 substituted imidazo[4,5-b]pyridines utilizing palladium catalysed C–N bond forming reactions with enolizable heterocycles

In this Letter we report a rapid and facile access to C2-substituted imidazo[4,5-b]pyridine analogues utilizing palladium mediated Buchwald–Hartwig cross-coupling reactions. The use of enolizable heterocycles as cross-coupling partners resulted in a wide range of imidazo[4,5-b]pyridine analogues which are prone to have medicinal relevance. Xantphos and Pd(OAc)₂ were found to be more effective for the coupling of 2-halo imidazo[4,5-b]pyridines with pyridone nucleophiles. A regioselective approach for the synthesis of 2-substituted 3H-imidazo[4,5-b]pyridine and 1H-imidazo[4,5-b]pyridine is also reported.     

Electrospun copper oxide nanoparticles as an efficient heterogeneous catalyst for N-arylation of indole

The N-arylation of indoles with a variety of aryl bromides is reported using copper oxide nanoparticles as a heterogeneous catalyst. These copper oxide nanoparticles, which were produced in a novel, facile, and scalable fashion via an electrospinning technique, resulted in an excellent product yield under mild conditions. Moreover, the catalyst was easily recovered and reused several times without significant loss of activity.