Potential distribution around a charged spherical colloidal particle in a medium containing its counterions and a small amount of added salts

A theory is developed for the potential distribution around a charged spherical colloidal particle carrying ionized groups on the particle surface in a medium containing its counterions (i.e., counterions produced from dissociation of the particle surface groups) and a small amount of added salts on the basis of the theory of Imai and Oosawa. Numerical solutions to the Poisson–Boltzmann equation for the potential distribution are obtained for the case of dilute (but not infinitely dilute) particle suspensions of volume fraction 1 for a1 (where is the Debye–Hückel parameter and a is the particle radius). Here we have taken into account the effects of (i) counterions from the particle surface groups, and (ii) the finite particle volume fraction. These effects, which are usually neglected in the conventional Poisson–Boltzmann equation, are found to be important. It is found that, as in the case of completely salt-free media, there is a certain critical value of the particle charge (which is the same as that for the completely salt-free case). When the particle charge is lower than the critical value, the potential is given by a Coulomb potential. If the particle charge is higher than the critical value, then counterions are accumulated in the vicinity of the particle surface (counterion condensation) and the potential becomes less dependent on the particle charge. The above behaviors can be observed even for the case where the electrolyte concentration is higher than the concentration of counterions from the particle surface groups, if the conditions 1 and a1are both satisfied.     

Analysis of functional groups on the surface of plasma-treated carbon nanofibers

Plasma chemically modified carbon nanofibers were characterized by X-ray photoelectron spectroscopy with regard to the content of carbon, oxygen, and nitrogen and the contribution of carboxylic groups or ester, carbonyl and hydroxylic groups or ether on the surface. Unfortunately, X-ray photoelectron spectroscopy only provides an average value of the first 10 to 15 molecular layers. For comparison, depth profiles were measured and wet chemical methods were applied to estimate the thickness of the functionalized layer and the distribution of oxygen-containing functional groups within the near-surface layers. The results indicate that the fiber surface is covered by a monomolecular oxygen-containing layer and that plasma treatment allows a complete oxygen functionalization of the uppermost surface layer. The best conditions for plasma treatment found within the set of parameters applied to generate complete functionalization are: plasma gas O(2)/Ar ratio 1:1, gas pressure 1-1.5 hPa, plasma power 80 W, treatment time >or= 5 min. Additionally, three quick and easy methods are presented to estimate the efficiency of plasma treatment with regard to surface functionalization: pyrolysis, contact angle measurements, and light permeability measurements of aqueous carbon nanofiber suspensions.     

Production of polyacrylonitrile particles by precipitation polymerization in supercritical carbon dioxide

Polyacrylonitrile particles were produced by precipitation polymerization of acrylonitrile (AN) without any colloidal stabilizer in supercritical carbon dioxide as a polymerization medium at about 30 MPa for 24 h at 65 °C at different initiator concentrations (0.8–45.2 mmol/l) and at different AN concentrations (10–40% w/v). An increase in the initiator concentration led to increases in the conversion and in the degree of coagulation and to a decrease in the molecular weight. At AN concentration of 20% w/v, micron-sized, relatively monodisperse polyacrylonitrile particles with clean and uneven surfaces were produced.     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

Synthesis of novel tri-podal mesogenic alkenes and side-chain polysiloxanes

Low molecular weight tri-podal biphenyl- and benzoate-type mesogens [C₆H₅C₆H₄O(CH₂)₅SiMe₂CH₂CH₂SiMe₂]₃CH (4), [C₁₁H₂₃O(C₆H₄)₂O(CH₂)₅SiMe₂]₃CH (5) and [MeOC₆H₄OC(O)C₆H₄O(CH₂)₅SiMe₂]₃CH (6) (C₆H₄ = 1,4-phenylene) were obtained, from branched silyl substituted methane precursors [CH₂CH(Me)₂Si]₃CH (1) and (HMe₂Si)₃CH (2). The biphenyl-containing ones (4) and (5) were converted into terminal alkenes, which were subsequently hydrosilylated with poly(methylsiloxanes). The polymer derived from (5) exhibited mesomorphic properties. Such systems have the potential to significantly increase the density of liquid crystal rod-like structures in side chains of linear polymers (or dendritic liquid crystal polymers).     

Thiol- and disulfide-modified oligonucleotide monolayer structures on polycrystalline and single-crystal Au(111) surfaces

We provide a comprehensive study of single- (ss) and double-strand (ds) oligonucleotides with either 25 or 10 bases or base pairs (bp) immobilized on polycrystalline and single-crystal Au(111) surfaces. The study is based on X-ray photoelectron spectroscopy, cyclic and differential pulse voltammetry, interfacial capacitance data, and electrochemical scanning tunnelling microscopy (in situ STM). The sequences used were the 25-bp sequence from the BRCA1 gene (25-mer), while the 10-bp oligonucleotides contained solely linear adenine and thymine sequences. The oligonucleotides were modified by the dimethoxytrityl group (DMT) via a disulfide group [DMT-S-S-ss25-mer and DMT-S-S-ds(AT)₁₀], a pure disulfide group (A₁₀-S-S-T₁₀), or a thiol group [HS-ss25-mer and HS-ds-(AT)₁₀], all via a hexamethylene linker. The overall pattern suggests strategies for controlled adsorption of DNA-based molecules and recognition of complementary strands or other molecules.     

Access to the structures of fluoromagnesium compounds: synthesis and structural characterization of the β-diketiminato magnesium fluoride [{CH(CMeNAr)2}Mg(μ-F)(THF)]2·toluene

β-Diketiminato magnesium fluoride [{CH(CMeNAr)₂}Mg(μ-F)(THF)]₂·toluene (Ar=2,6-i-Pr₂C₆H₃, 2·toluene) was synthesized. The molecular structure of 2 revealed for the first time, the double fluoro bridge feature between the two magnesium atoms with a typical MgF bond length (average 1.95 Å).     

The synthesis and characterisation of 1′-ethynyl-2,5-dimethylazaferrocene and derivatives

The synthesis of 1′-ethynyl-2,5-dimethylazaferrocene is reported along with its cyclic voltammetry measurements and the X-ray structure determination of its W(CO)₅-complex. Basic coordination and organic chemistry of 1′-ethynyl-2,5-dimethylazaferrocene is also presented via derivatives incorporating cis-Pt(dppe) and Si(Et)₃ units.     

Conformation-dependent change in antitumor activity of linear and branched (1----3)-beta-D-glucans on the basis of conformational elucidation by carbon-13 nuclear magnetic resonance spectroscopy.

The antitumor activity of (1----3)-beta-D-glucans was tested in order to clarify its conformation-dependent response together with conformational elucidation by carbon-13 nuclear magnetic resonance (13C-NMR) spectroscopy. It was shown that the following three conformations, single chain, single helix and triple helix, are readily distinguished by the high-resolution solid-state 13C-NMR method. It turned out that preparations of linear (1----3)-beta-D-glucans of a triple helical conformation were ineffective in the inhibition of tumor growth. These linear (1----3)-beta-D-glucans were converted to an effective form in the inhibition of tumor growth when they were lyophilized from dimethyl sulfoxide (DMSO) solutions as a result of a conformational change from the triple helical to the single chain forms. They were not effective, however, when assayed in DMSO solution. In contrast, it was found that a branched (1----3)-beta-D-glucan is effective not only in either saline solutions of the triple helical sample or the lyophilized sample from DMSO, but also in DMSO solution. The aforementioned drastic change in antitumor activity was interpreted in terms of resulting conformational changes as analyzed by the 13C-NMR method.     

Ein Beitrag zur ?nologie und ?kologie von Selen

Summary Little is known about selenium contents in alcoholic beverages, especially in wine, because no reliable determination method was available so far. A procedure for the detection of selenium in the pg- and low ng-range was developed, which uses the hydride-generation-condensation-AAS (HGC-AAS). Selenium contents in 103 German wines of the year vintages 1950 until 1985 were determined. In mean they range between 0.29 and 0.79 g/l Se and show a certain dependence from the geological soil formation and the wine species. Corresponding vineyard soils from Ingelheim (Rheinhessen, FRG) contain 0.18–0.44 mg/kg Se, mean 0.24 mg/kg Se, 10% of it is available for plants. The distribution of selenium in grape berries shows selenium-rich seeds and — with red wine species — selenium-rich skins. Higher selenium contents by contamination were observed near an industrial location. The behaviour of selenium in the vegetation cycle is pursued. The selenium depletion during fermentation may amount to 60%. All results are summarized in the so-called trace element vinogram. Selenium hence is a regular and natural constituent part of wine.

---

---

Herrn Prof. Dr. R. Neeb zum 60. Geburtstag gewidmet