Mono- and Binuclear Copper(II) and Nickel(II) Complexes with the 3,6-Bis(picolylamino)-1,2,4,5-Tetrazine Ligand

Four new compounds of formulas [Cu(hfac)₂(L)] (1), [Ni(hfac)₂(L)] (2), [{Cu(hfac)₂}₂(µ-L)]·2CH₃OH (3) and [{Ni(hfac)₂}₂(µ-L)]·2CH₃CN (4) [Hhfac = hexafluoroacetylacetone and L = 3,6-bis(picolylamino)-1,2,4,5-tetrazine] have been prepared and their structures determined by X-ray diffraction on single crystals. Compounds 1 and 2 are isostructural mononuclear complexes where the metal ions [copper(II) (1) and nickel(II) (2)] are six-coordinated in distorted octahedral MN₂O₄ surroundings which are built by two bidentate hfac ligands plus another bidentate L molecule. This last ligand coordinates to the metal ions through the nitrogen atoms of the picolylamine fragment. Compounds 3 and 4 are centrosymmetric homodinuclear compounds where two bidentate hfac units are the bidentate capping ligands at each metal center and a bis-bidentate L molecule acts as a bridge. The values of the intramolecular metal···metal separation are 7.97 (3) and 7.82 Å (4). Static (dc) magnetic susceptibility measurements were carried out for polycrystalline samples 1–4 in the temperature range 1.9–300 K. Curie law behaviors were observed for 1 and 2, the downturn of χ_MT in the low temperature region for 2 being due to the zero-field splitting of the nickel(II) ion. Very weak [J = −0.247(2) cm⁻¹] and relatively weak intramolecular antiferromagnetic interactions [J = −4.86(2) cm⁻¹] occurred in 3 and 4, respectively (the spin Hamiltonian being defined as H = −JS₁·S₂). Simple symmetry considerations about the overlap between the magnetic orbitals across the extended bis-bidentate L bridge in 3 and 4 account for their magnetic properties.     

Green and Functional Aerogels by Macromolecular and Textural Engineering of Chitosan Microspheres

Tremendous interest was recently devoted to the preparation of porous and functional materials through sustainable route, including primarily the use of renewable biopolymers instead of petroleum‐sourced synthetic chemicals. Among the biopolymers available in enormous quantity, chitosan – obtained by deacetylation of chitin – stands as the sole nitrogen‐containing cationic amino‐sugar carbohydrate. This distinctively provides chitosan derivatives with plenty of opportunities in materials science. Particularly, its pH switchable solubility allowed the preparation of three‐dimensional entangled nanofibrillated self‐standing microspheres. These porous hydrogels behave as nano‐reactors to confine exogenous nanoobjects within the polysaccharide network, including sol‐gel metal alkoxide species, organometallic derivatives and isotropic and oriented nanoparticles. Besides, the interfacial interplay of chitosan with lamellar clay and graphene oxide allowed the penetration of the biopolymer inside of the galleries, which result in a complete delamination of the layered nanomaterials. The preserved gelation memory of chitosan in these formulations provides a way to access porous microspheres entangling exfoliated nanometric sheets. CO₂ supercritical drying of functional hydrogel beads enabled efficient removal of water and other liquid solvents without wall collapsing, allowing large‐scale preparation of millimetric hydrocolloidal microspheres with an open macroporous network. These functionalized lightweight biopolymer aerogels find applications in heterogeneous catalysis, sensing, adsorption, insulation and for the design of other sophisticated porous nanostructures. Beyond their tailorable molecular and textural‐engineering, the possibility for macroscopic shaping of these intriguing nanostructures opens many new opportunities, especially in additive‐manufacturing for soft and hybrid robotics.     

Controlling the optical and catalytic properties of artificial metalloenzyme photocatalysts using chemogenetic engineering

Visible light photocatalysis enables a broad range of organic transformations that proceed via single electron or energy transfer. Metal polypyridyl complexes are among the most commonly employed visible light photocatalysts. The photophysical properties of these complexes have been extensively studied and can be tuned by modifying the substituents on the pyridine ligands. On the other hand, ligand modifications that enable substrate binding to control reaction selectivity remain rare. Given the exquisite control that enzymes exert over electron and energy transfer processes in nature, we envisioned that artificial metalloenzymes (ArMs) created by incorporating Ru(ii) polypyridyl complexes into a suitable protein scaffold could provide a means to control photocatalyst properties. This study describes approaches to create covalent and non-covalent ArMs from a variety of Ru(ii) polypyridyl cofactors and a prolyl oligopeptidase scaffold. A panel of ArMs with enhanced photophysical properties were engineered, and the nature of the scaffold/cofactor interactions in these systems was investigated. These ArMs provided higher yields and rates than Ru(Bpy)₃²⁺ for the reductive cyclization of dienones and the [2 + 2] photocycloaddition between C-cinnamoyl imidazole and 4-methoxystyrene, suggesting that protein scaffolds could provide a means to improve the efficiency of visible light photocatalysts.

Artificial metalloenzyme visible light photocatalysts possess enhanced optical properties and are competent towards single electron and energy transfer organic transformations.     

Antioxidant,Antimicrobial, and Insecticidal Properties of a Chemically Characterized Essential Oil from the Leaves of Dittrichia viscosa L.

Since some synthetic insecticides cause damage to human health, compounds in plants can be viable alternatives to conventional synthetic pesticides. Dittrichia viscosa L. is a perennial Mediterranean plant known to possess biological activities, including insecticidal properties. The chemical composition of an essential oil (EOD) from D. viscosa, as well as its antioxidant, antimicrobial, and insecticidal effects on the cowpea weevil (Callosobruchus maculatus) were determined. Forty-one volatile compounds were identified in EOD, which accounted for 97.5% of its constituents. Bornyl acetate (41%) was a major compound, followed by borneol (9.3%), α-amorphene (6.6%), and caryophyllene oxide (5.7%). EOD exhibited significant antioxidant activity in all tests performed, with an IC₅₀ of 1.30 ± 0.05 mg/mL in the DPPH test and an EC₅₀ equal to 36.0 ± 2.5 mg/mL in the FRAP assay. In the phosphor-molybdenum test, EOD results ranged from 39.81 ± 0.7 to 192.1 ± 0.8 mg AAE/g E. EOD was active on E. coli (9.5 ± 0.5 mm), S. aureus (31.0 ± 1.5 mm), C. albicans (20.4 ± 0.5 mm), and S. cerevisiae (28.0 ± 1.0 mm), with MICs ranging from 0.1 mg/mL to 3.3 mg/mL. We found that 1 µL of EOD caused 97.5 ± 5.0% insect mortality after 96 h in the inhalation test and 60.0 ± 8.3% in the ingestion assay. The median lethal concentration (LC₅₀) was 7.8 ± 0.3 μL EO/L, while the effective concentration in the ingestion test (LC₅₀) was 15.0 ± 2.1 μL EO/L. We found that 20 µL of EOD caused a reduction of more than 91% of C. maculatus laid eggs.     

A fast algorithm for Gaussian type quadrature formulae with mixed boundary conditions and some lumped mass spectral approximations

After studying Gaussian type quadrature formulae with mixed boundary conditions, we suggest a fast algorithm for computing their nodes and weights. It is shown that the latter are computed in the same manner as in the theory of the classical Gauss quadrature formulae. In fact, all nodes and weights are again computed as eigenvalues and eigenvectors of a real symmetric tridiagonal matrix. Hence, we can adapt existing procedures for generating such quadrature formulae. Comparative results with various methods now in use are given. In the second part of this paper, new algorithms for spectral approximations for second-order elliptic problems are derived. The key to the efficiency of our algorithms is to find an appropriate spectral approximation by using the most accurate quadrature formula, which takes the boundary conditions into account in such a way that the resulting discrete system has a diagonal mass matrix. Hence, our algorithms can be used to introduce explicit resolutions for the time-dependent problems. This is the so-called lumped mass method. The performance of the approach is illustrated with several numerical examples in one and two space dimensions.

     

Tetrathiafulvalene based electroactive ligands and complexes: Synthesis,crystal structures and antifungal activity

The synthesis of two tetrathiafulvalene-appended pyridinehydrazone pyrimidine ligands, namely (Z)-4-(2-((5-([2,2′-bi(1,3-dithiolylidene)]-4-yl)pyridin-2-yl)methylene) hydrazinyl)-6-chloropyrimidine L1 and (Z)-4-(2-((6-([2,2′-bi(1,3-dithiolylidene)]-4-yl)pyridin-2-yl)methylene) hydrazinyl)-6-chloropyrimidine L2 is described. Ligand L1 was reacted with cobalt(II) to yield a cationic metal complex [Co(L1)₂] while ligand L2 was reacted with zinc(II) to afford a neutral metal complex [ZnL2Cl₂]. The crystal structure analysis of [Co(L1)₂] indicate that Co(II) ion is coordinated by six nitrogen atoms from two perpendicular ligands while in [ZnL2Cl₂], Zn(II) is coordinated by two chlorine atoms and three nitrogen atoms. The electrochemical behavior indicate that ligands L1 and L2 and the zinc(II) complex are suitable fort the preparation of crystalline radical cation salts. Finally the determination of MIC₈₀ values against C. albicans, C. glabrata, C. parapsilosis, C. krusei and E. dermatitidis revealed that the cobalt(II) metal complex [Co(L1)₂] is active against all the studied fungi.     

A neutral zwitterionic molecular solid

We report on the acid ethylenedithiotetrathiafulvaleneamidoglycine (EDT-TTF-CO-NH-CH(2)-CO(2)H; 1; EDT-TTF=ethylenedithiotetrathiafulvalene) and the 1:1 adduct [(EDT-TTF)(·+)-CO-NH-CH(2)-(CO(2))(-)][(EDT-TTF)-CO-NH-CH(2)-(CO(2)H)]·CH(3)OH (2), a new type of hydrogen-bonded, 1:1 acid/zwitterion hybrid embrace of redox peptidics into a two-dimensional architecture, an example of a system deliberately fashioned so that oxidation of π-conjugated cores toward the radical-cation form would interfere with the activity of the appended ionizable residues in the presence of a templating base during crystal growth. First-principles calculations demonstrate that, notwithstanding preconceived ideas, a metallic state is more stable than the hole-localized alternatives for a neat 1:1 neutral acid/zwitterion hybrid. The inhomogeneous Coulomb field associated with proton-shared, interstacks O-H···O hydrogen bonds between the ionizable residues distributed on both sides of the two-dimensional π-conjugated framework leads, however, to a weak hole localization responsible for the activated but high conductivity of 1 S cm(-1). This situation is reminiscent of the role of the environment on electron transfer in tetraheme cytochrome c, in which the protonation state of a heme propionate becomes paramount, or ion-gated transport phenomena in biology. These observations open rather intriguing opportunities for the construction of electronic systems at the interface of chemistry and biology.     

DSC study of the kinetic parameters of the metastable phases formation during non-isothermal annealing of an Al–Si–Mg alloy

Kinetics of β″ and β′ precipitations in an AlSiMg have been studied under non-isothermal conditions using differential scanning calorimetry (DSC) technique. The variation of the activation energy as a function of transformed fraction is determined using two isoconversional methods of Kissinger–Akahira–Sunose (KAS) and Friedman. The results obtained using the two methods show a change in the activation energy for both metastable phases precipitations as a function of transformed fraction. The results obtained from KAS method as compared with those obtained from Friedman method, show some major disagreements between the two methods. The growth exponent, determined by Ozawa method, decreases as a function of temperature for both phases.     

Investigation of the dissociation pathways of metolachlor, acetochlor and alachlor under electron ionization - application to the identification of ozonation products

With the future aim of using gas chromatography coupled with mass spectrometry to characterize the transformation products of ozonated herbicides: metolachlor, acetochlor and alachlor, an interpretation of their electron ionization mass spectra is presented. Fragmentation mechanisms are proposed on the basis of isotopic labelling and multiple-stage mass spectrometry experiments carried out on an ion trap mass spectrometer. We also give examples in order to demonstrate how the elucidation of such fragmentation mechanisms for herbicides may simplify the characterization of their ozonation products.     

Antifungal activity and phytochemical screening of extracts from Phoenix dactylifera L. cultivars

In this study, the rachis extracts of eight date palm Phoenix dactylifera L. cultivars were analysed by phytochemical screening and bioautography on Fusarium oxysporum f. sp. albedinis (Foa). The choice of cultivars was based on their reaction to Foa (resistant, tolerant and sensitive). Phytochemical screening was realised for flavonoids, tannins, alkaloids and coumarins. Antifungal effects were mostly represented by dichloromethanic extracts (seven out of nine inhibition zones). The best results were represented by the dichloromethanic extract of the cultivar 'Bent-Cherk' rachis (6.50?±?1.41?mm) and the ethyl acetate extract of the cultivar 'Rotbi' rachis (6.00?±?1.41?mm). The date palm cultivars presented some similarities concerning phytochemical screening results related to their resistance or sensibility to Foa. From the correlation between phytochemical screening and bioautography, it was observed that the majority of bioactive compounds against Foa seem to be polyphenols. Thus, the natural defence mechanism in vivo against Foa is probably related to the action of polyphenols. The difference between resistant, tolerant and sensitive cultivars is related to their mechanism of action.