Engineered pixels using active plasmonic holograms with liquid crystals

Digital holography requires arrays of small reconfigurable elements to achieve complex reconstruction of the hologram with common systems based on pixels utilizing liquid crystal on silicon (LCoS) technology. The backplane of a typical pixel element is potentially underutilized and thus relatively large physical areas exist in which information can be stored and exploited to give additional functionality to pixel elements. Polarisation and wavelength dependent optical properties can be achieved in small areas using the plasmonic effects of optical antennae. The integration of LCs with optical antennae‐based plasmonic holograms allows active modulation of the far field pattern. The work here demonstrates the concept that conventional LCoS pixel elements can be greatly enhanced with the integration of plasmonic holograms, composed of optical antennae patterned on the surface, giving rise to new levels of modulation capability for holographic pixel elements. Using LCs, polarisation dependent effects in plasmonic holograms can be switched. ‘Engineered pixels', with sub‐wavelength multiplexing over both polarisation and wavelength, can increase the channel capacity of a typical LC display device. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Chemical depth profiling and 3D reconstruction of III–V heterostructures selectively grown on non‐planar Si substrates by MOCVD

The chemical characterization of novel 3D architectures with nanometre‐scale dimensions is extremely challenging. The chemical composition of InGaAs/AlAs quantum wells selectively grown in SiO₂ trenches, 100–300 nm wide, is studied. Combining high lateral resolution 3D ToF‐SIMS analysis and Auger measurements, the chemical composition of individual trenches was obtained confirming the uniformity of these III–V heterostructures. These results correlate well with an average approach using SIMS depth profiling. The effects of ion beam orientation on the surface topography of confined structures were highlighted. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Can 2‐acylpyrroles form an intramolecular hydrogen bond?

The formation of intramolecular hydrogen bonding by certain N‐substituted 2‐acylpyrroles has been demonstrated by B3LYP/aug‐cc‐pVDZ calculations, the quantum theory of atoms in molecules, and the natural bond orbital method. Total electron energy densities H_BCP at the bond critical point of the H?O bond were applied to analyze the strength of these interactions. The relations between quantum theory of atoms in molecules, carbonyl stretching vibrational modes ν_{C = O}, and natural bond orbital parameters associated with the formation of the C–H?O interaction have been established. The short contacts were found experimentally in the crystal structure of a new 2‐acylpyrrole derivative 5‐chloro‐2‐oxopentyl‐1‐(5‐chloro‐2‐oxopentyl)pyrrolo‐2‐carboxylate. The influence of 2‐ and N‐substitution of 2‐acylpyrroles on C‐H?O interaction energy is discussed. It was found that the methylene group may act as a proton donor leading to a red‐shift or blue‐shift phenomenon of the ν_C–H stretching mode. Copyright © 2015 John Wiley & Sons, Ltd.     

Theoretical kinetic study on the decomposition of 1,5‐diaminotetrazole

1,5‐Daminotetrazole (DAT) is of much interest because of the practical significance and the diversity of characteristics. The study on the decomposition pathway and the kinetics of DAT has been performed based on the quantum chemistry theory. The minimum energy path (MEP) calculation has shown that NH₂N₃ and NH₂CN are the initially detected products of DAT. And the structures of reactant, products and transition state were optimized with MP2 methods using 6‐311G** basis sets, and the energies were refined using CCSD(T)/6‐311G** levels of theory. The calculated rate constants were obtained using the conventional transition‐state theory (TST) and the canonical variational transition‐state theory (CVT) methods. The calculation results indicated that the energy barrier of decomposition reaction is 47.98 kcal mol^?1 and the variational effect is small. In addition, the rate constants and the Arrhenius experience formula of DAT decomposition have been obtained between 200 and 2500 K temperature regions. The fitted three‐parameter expressions calculated using the TST and CVT methods are (TST) and (CVT). This work may provide the theoretical support for further experimental synthesis and testing. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation,Characterization and Electrochemical Behavior of Pd‐Au Alloy Incorporated into Zeolites/Graphite Electrodes

The present article reports the preparation of Pd‐Au alloy incorporated into NaY zeolites layer via simple immersion technique. Pd‐Au particles were incorporated into zeolites cages via Co‐impregnation or alternate impregnation of metal ions. Cyclic voltammetry was used to evaluate the state of the modified electrodes in alkaline media. Surface morphology as well as elemental composition of the modified layer were examined using Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX).     

Electropolymerized coatings of poly(o‐anisidine) and poly(o‐anisidine)‐TiO2 nanocomposite on aluminum alloy 3004 by using the galvanostatic method and their corrosion protection performance

Poly(o‐anisidine) (POA) and poly(o‐anisidine)‐TiO₂ (POA‐TiO₂) nanocomposite coatings on aluminum alloy 3004 (AA3004) have been investigated by using the galvanostatic method. The electrosynthesized coatings were characterized by FT ‐ IR spectroscopy, XRD, SEM ‐ EDX and SEM. The corrosion protection performance of POA and POA‐TiO₂ nanocomposite coatings was investigated in the 3.5% NaCl solution by using potentiodynamic polarization technique and electrochemical impedance spectroscopy. The results show that the corrosion rate of the nanocomposite coatings is about 900 times lower than the bare AA3004 under optimal conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

This paper summarizes a study of controlled migration of an antifog (AF) additive; sorbitan monooleate (SMO), from linear low density polyethylene (LLDPE) films containing a compatibilizer, LLDPE grafted maleic anhydride (LLDPE‐g‐MA). LLDPE/LLDPE‐g‐MA/SMO blends were prepared by melt compounding. Bulk and surface properties of compression molded LLDPE films containing SMO and LLDPE‐g‐MA were characterized using Fourier transform infrared spectroscopy and contact angle measurements. Thermal properties were investigated using a thermal gravimetric analyzer. Diffusion coefficient (D) was calculated, and AF properties were characterized using a “hot fog” test. Compression molded films were characterized for their morphology using high‐resolution scanning electron microscopy, and rheological properties were measured using a parallel‐plate rotational rheometer. It was found that the LLDPE/LLDPE‐g‐MA/SMO systems are characterized by a slower SMO migration rate, a lower diffusion coefficient, and lower contact angle values compared with LLDPE/SMO blends. These results are well correlated with results of a hot fog test. Morphological studies revealed a very fine dispersion of SMO in the LLDPE films, when 3 phr LLDPE‐g‐MA was combined with 1 phr SMO. Thermal analysis results show that the incorporation of 3 phr LLDPE‐g‐MA and 1 phr SMO significantly increases the decomposition temperature of the blend at T > 400°C. At high shear rates, the LLDPE blends show that the AF and the compatibilizer have a lubrication effect on LLDPE. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and some transformations of 2-(2-thienyl)naphtho[1,2-d]oxazole

Condensation of 1-amino-2-hydroxynaphthalene with thenoyl chloride in 1-methyl-2-pyrrolidinone medium afforded 2-(2-thienyl)naphtho[1,2-d]oxazole. The latter was brought into electrophilic substitution reactions like nitration, bromination, sulfonation, formylation, and acylation. The reactions proceeded via electrophilic attack at the 5-position of the thiophene ring, but the nitration and bromination occurred involving both the thiophene and naphthalene fragments.