Multicomponent reactions for the synthesis of new cyclopentadienephosphonate derivatives in water

A series of polysubstituted cyclopentadienephosphonate derivatives were synthesized via one-pot multicomponent reactions of primary amines and phosphites with activated acetylenic compounds in water as the solvent at room temperature.

Particularly valuable features of this method include high yields of products, broad substrate scope, short reaction time and a straightforward procedure.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.     

‘Click Synthesis’ of Some Novel O‐Substituted Oximes Containing 1,2,3‐Triazole‐1,4‐diyl Residues as New Analogs of β‐Adrenoceptor Antagonists

The ‘click synthesis’ of some novel O‐substituted oximes, 7a – 7t , which contain 1,2,3‐triazolediyl residues, as new analogs of β‐adrenoceptor antagonists is described (Schemes 1–4). The synthesis of these compounds was achieved in four to five steps. The formation of oximes of 9H‐fluoren‐9‐one and benzophenone, i.e., 9a and 9b , respectively, followed by their reaction with propargyl bromide, afforded O‐propargyl oximes 10a and 10b , respectively, which by a subsequent CuI‐catalyzed Huisgen cycloaddition with prepared β‐azido alcohols 11a – 11j (Schemes 2 and 3), led to the target compounds 7a – 7t in good yields.     

Synthesis and Biological Evaluation of a Novel Series of Chalcones Incorporated Pyrazole Moiety as Anticancer and Antimicrobial Agents

A newly synthesized series of chalcone derivatives containing pyrazole rings were synthesized and evaluated for their cytotoxic activities in vitro against several human cancer cell lines. Most of the prepared compounds showed potential cytotoxicity against human breast cancer cell lines MCF-7, HEPG-2, and HCT-116. Also the compounds were evaluated as antimicrobial agents. The three compounds 3, 4, and 5 were proved to be better anticancer agents than the positive standard doxorubicin with IC50 values (4.7, 4.4, and 3.9???g/ml) against the same human cancer cell lines, whereas compounds 5 and 6 showed the most active antimicrobial compounds in comparison to the other chalcones.     

The effect of starvation periods on the performance of a two-liquid-phase mixed tank bioreactor for removal of n-hexane from air streams

In this research the effect of silicone oil as a heavy organic solvent on the performance of a mixed tank bioreactor was investigated. In the first stage of the experiments, the response of a two-liquid-phase mixed tank bioreactor to periods of n-hexane starvation was compared with that of a control bioreactor. In the control bioreactor, after 3?days of starvation, approximately six days were needed to reach the removal efficiency it had before starvation. This figure was only 10?h for the silicone oil-containing bioreactor. The results confirmed that inclusion of a heavy organic solvent can increase the elimination capacity of a bioreactor and to help sustain high elimination capacity after starvation periods. In the second stage of the experiments, the effect of the amount of silicone oil on the performance of the bioreactor was investigated. Increasing the amount of oil from 5 to 10% (v/v) increased the maximum elimination capacity from 106 to 117?g/m³?h.     

Characterization and Catalytic Properties of Aerogel Chromium Oxide Supported by Alumina or Silica

Alumina or silica supported chromium oxide catalysts prepared by sol-gel technique have been investigated by X-ray diffraction, BET analysis, combined diffuse reflectance spectroscopy, EPR and reduction-extraction by ethane 1,2 diol. The results reveal the presence of Cr³⁺, Cr⁵⁺ and Cr⁶⁺ ions. Chromium species Cr⁶⁺ are isolated and atomically dispersed on the alumina support as free chromate CrO ₄ ^2– while on silica, dichromate or polychromate species like Cr₂O ₇ ^2– or Cr₃O ₁₀ ^2– predominate. Chromium oxide exhibits a better catalytic properties for paraxylene partial oxidation, when it is supported on alumina. The difference of oxidation states and degree of oligomerisation of chromium on the two supports affects the catalytic properties.     

Preparation of Alumina Supported Palladium Catalysts by Sol-Gel Method

The chemical reactivity of the aluminium-sec-butoxide (ASB) and the palladium acetylacetonate Pd(acac)₂, used as precursors for the preparation of the alumina supported palladium catalysts by sol-gel method was investigated by the spectroscopic study of the precursor mixture during ageing, using FTIR, UV-VIS and ²⁷Al NMR. The obtaind results showed that acetylacetonate ligands were linked to aluminum when the mixture was aged at 40°C. This was proved by the bands observed at 1530 and 1600 cm^–1 in the FTIR spectra, the band obtained at 289 nm in the UV-VIS spectra and the ²⁷Al NMR sharp peak at 3 ppm. Furthermore, in order to avoid the Pd(acac)₂ reduction to metallic palladium by the SB occurring when the mixture is aged for 3 h, an optimum ageing time should be selected. The precursors modification and the preservation of the palladium oxidation state during ageing could be the required conditions to create a bond between palladium and aluminium during the gelation step. This should be the reason of the thermal stability improvement of the alumina supported palladium catalyst prepared by the sol-gel method.     

Syntheses and characterizations of poly[2‐(dimethylamino)ethyl methacrylate]–poly(propylene oxide)–poly[2‐(dimethylamino)ethyl methacrylate] ABA triblock copolymers

A novel, near‐monodisperse, well‐defined ABA triblock copolymer, poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(propylene oxide)‐b‐poly[2‐(dimethylamino)ethyl methacrylate], was synthesized via oxyanion‐initiated polymerization. The initiator was a telechelic‐type potassium alcoholate prepared from poly(propylene glycol) and KH in dry tetrahydrofuran. The copolymers produced were characterized by Fourier transform infrared, ¹H NMR, and gel permeation chromatography (GPC). GPC and ¹H NMR analyses showed that the products obtained were the desired copolymers, with narrow molecular weight distributions (ca. 1.09–1.11) very close to that of the original poly(propylene glycol). ¹H NMR, surface tension measurements, and dynamic light scattering all indicated that the triblock copolymer led to interesting aqueous solution behaviors, including temperature‐induced micellization and very high surface activity. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 624–631, 2002; DOI 10.1002/pola.10144     

Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.