Synthesis and performance of electroless Ni–P–TiCN composite coatings on Al substrate

Electroless Ni–P and Ni–P–TiCN composite coatings have been deposited successfully on Al substrates. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) techniques were applied to study the surface morphology and the chemical composition of the deposited films. Moreover, X‐ray diffraction (XRD) proved that Ni–P and Ni–P–TiCN deposits have amorphous structures. The properties of Ni–P–TiCN/Al composite films such as hardness, corrosion resistance and electrocatalytic activity were examined and compared with that of Ni–P/Al film. The results of hardness measurements reveal that the presence of TiCN particles with Ni–P matrix improves its hardness. Additionally, the performance against corrosion was examined using Tafel lines and electrochemical impedance spectroscopy techniques in both of 0.6 M NaCl and a mixture of 0.5 M H₂SO₄ with 2 ppm HF solutions. The results indicate that the incorporation of high dispersed TiCN particles into Ni–P matrix led to a positive shift of the corrosion potential and an increase in the corrosion resistance for all aluminum substrates after their coating with Ni–P–TiCN. In addition, Ni–P–TiCN/Al electrodes showed a higher electrochemical catalytic activity and stability toward methanol oxidation in 0.5 M NaOH solution compared with that of Ni–P/Al. Copyright © 2014 John Wiley & Sons, Ltd.     

Development and Validation of a High-Performance Thin-Layer Chromatographic Method for the Assay of Ternary Mixtures Containing Cetirizine Dihydrochloride in Pharmaceutical Dosage Forms

JPC – Journal of Planar Chromatography – Modern TLC - A highly validated and selective high-performance thin-layer chromatography (HPTLC) method was developed for the determination of...     

Synthesis and reactions of 3‐pyrrolidinones

This review presents a survey of the synthetic methods and reactions of 3‐pyrrolidinones I (R = H, alkyl, acyl, ester; R₁ = H, alkyl, cyano, ester, etc). 3‐Pyrrolidinones are synthetically versatiles substrate, as they can be used for synthesis of a large variety of heterocyclic compounds, such as indoles and 5‐deazapteroic acid analogues and as a raw material for drug synthesis. The high reactivity of an active methylene group next to the carbonyl of the pyrrolidine ring is useful for various syntheses.     

Crystal Structures and Spectral Studies of [Ph3Sn(O2AsMe2)], [Bu2ClSn(O2AsMe2)] and [PhClSn(O2AsMe2)(μ‐OMe)]2

[Ph₃Sn(O₂AsMe₂)] ( 1 ) and [PhClSn(O₂AsMe₂)(μ‐OMe)]₂ ( 3 ) have been synthesized by treatment of Ph₃SnCl and Ph₂SnCl₂ with Na(O₂AsMe₂) in methanol, respectively. [Bu₂ClSn(O₂AsMe₂)] ( 2 ) has been prepared by the reaction of Bu₂SnCl₂ with HO₂AsMe₂ in methanol. X‐ray diffraction studies show 1 to crystallize in the monoclinic space group P2₁/n with a = 699.8(1), b = 1961.4(2), c = 1433.6(2) pm, β = 95.17(1)°, and Z = 4. 2 also crystallizes monoclinic in the space group P2₁/m, the cell parameters being a = 480.6(1), b = 1992.7(2), c = 808.8(1) pm, β = 103.726(5)°, and Z = 2. Both compounds form infinite chains with alternating (Me₂AsO₂)^? and (R₃Sn)⁺ or (R₂ClSn)⁺ units. The dimer 3 consists of 8‐membered (OSnOAs)₂ rings in which the tin atoms are bridged by methanolate bridges. It crystallizes triclinic in the space group with a = 822.8(2), b = 910.4(2), c = 929.2(2) pm, α = 77.04(3)°, β = 82.35(3)°, γ = 68.69(3)°, and Z = 1 for the dimer. The vibrational and mass spectra of 1 , 2 and 3 are given and discussed.     

Morphological and Interaction Characteristics of Surface-Active Ionic Liquids and Palmitic Acid in Mixed Monolayers

A series of water soluble, surface-active ionic liquids (SAILs), namely, 1-alkyl-3-methyl imidazolium chlorides ([C_n-mim]Cl) and their mixtures with palmitic acid (PA) are investigated in Langmuir monolayers and Langmuir–Blodgett films. It is inferred from the surface pressure-area isotherms that C₁₆-mim-IL mixes non-ideally with PA and stabilizes the binary mixed films. In addition, the residence of mim-IL at the water surface is enhanced as a function of the increasing alkyl side chain length. Generally, the compressional moduli values decrease upon increasing the content of the mim-ILs over a wide range of compositions. Furthermore, film relaxation measurements indicate that the IL component is selectively excluded from the mixed films upon achieving a certain target pressure. Brewster angle microscope images demonstrate minimal changes on the PA domains in the presence of either C₄- and C₈-mim-ILs, whereas presence of the hexadecyl counterpart results in the formation of condensed sheets. Atomic force microscopy imaging of deposited films show the formation of propeller-like aggregates when C₈- or C₁₆-mim-IL is present in the mixed films.     

Click Synthesis of 1,2,3-Triazole Nucleosides Based on Functionalized Nicotinonitriles

Russian Journal of Organic Chemistry - A facile synthesis of a new series of 1,2,3-triazolyl nucleosides via one-pot click reaction is described. Acetylenic nicotinonitriles synthesized previously...     

Spectrofluorimetric determination of guanethidine sulphate,guanfacine hydrochloride,guanoclor sulphate and guanoxan sulphate in tablets and biological fluids,using benzoin

A sensitive and rapid Spectrofluorimetric method for the determination of guanethidine sulphate, guanfacine hydrochloride, guanoclor sulphate and guanoxan sulphate in tablets and spiked human serum and urine samples is described. The method is based on the reaction of monosubstituted guanidino compounds in an aqueous potassium hydroxide solution with benzoin, in the presence of -mercaptoethanol and sodium sulphite. Highly fluorescent derivatives were obtained, with excitation and emission maximum wavelengths around 325 and 430 nm, respectively. In optimal reaction conditions, the linearity ranges were 0.04–0.28 g/ml, with relative standard deviations less than 2%. The method has been successfully applied to the determination of these drugs in tablets. The results are highly correlated with the B.P. method. Chloroform (or for guanoxan dichloromethane) was used to extract the drugs from serum and urine at basic pH, followed by the proposed fluorimetric method. The limit of detection is 0.02 g/ml for the selected drugs.     

Novel Synthesis of Dihydroquinoxalinylpyridazine Derivatives

Methylquinoxaline derivative 1 undergoes bromination to give bromomethyl quinoxaline 2 , which could be transferred to cyanomethyl quinoxaline 3 . The latter compound 3 readily coupled with arene diazonium salts to give hydrazone derivatives 5a‐c . Compounds 5a,b reacted with active methylene reagents to give the target ring system, quinoxalinylpyridazine derivatives 8a‐c . Compound 1 reacted with DMFDMA to give the enamine derivative 9 , which coupled with arene diazonium salts to give the aldehydic hydrazone derivatives 10a‐c . Compound 10 reacted with active methylene compounds to give quinoxalinylpyridazine derivatives. UV characterization of some of the prepared compounds was reported.     

Synthesis and Reactions of Some New Pyrrolylfuro[2,3‐d]Pyrimidines and Pyrrolopyrazinofuropyrimidines

5‐Amino‐4‐methyl‐2‐phenyl‐6‐substitutedfuro[2,3‐d]pyrimidines ( 2a‐c ) were reacted with 2,5‐dimethoxytetrahydrfuran to afford the pyrrolyl derivatives 3a‐c . Compound 3a was chosen as intermediate for the synthesis of poly fused heterocycles incorporated furopyrimidines moiety 4–11 . Some of the synthesized compounds were screened for their antibacterial and antifungal activities.     

Studies with 3‐functionally substituted 2‐arylhydrazononitriles: A new route to 3‐substituted‐2‐arylhydrazononitriles, 4‐amino‐pyrazole‐5‐carbonitriles,azadienes and cinnolines

3‐Amino‐3‐phenyl‐2‐phenylazoacrylonitrile 6 is obtained in good yield via reaction of 5 with phenyl magnesium bromide. The compound 6 is readily converted into 4a . The so formed alkanenitrile reacted with phenylmagnesium bromide to yield 8 . Compound 8 could be also obtained from reaction of 9 with phenylmagnesium bromide. The arylhydrazononitriles 8 and 4a reacted with chloroacetonitrile to yield the 4‐aminopyrazoles 12a,b . Compound 12a reacted with acetic anhydride to yield the 15a and with benzoyl chloride to yield the pyrazole 16 which was converted into 15b . Refluxing 10 in acetic acid gave a mixture of the azadiene 21 and the cinnoline 22 is obtained. The azadiene 21 is converted into 22 either thermally or photochemically.