Fused quinoline heterocycles VI: Synthesis of 5H‐1‐thia‐3,5,6‐triazaaceanthrylenes and 5H‐1‐thia‐3,4,5,6‐tetraazaaceanthrylenes

Ethyl 3‐amino‐4‐chlorothieno[3,2‐c]quinoline‐2‐carboxylate ( 4 ) is a versatile synthon, prepared by reacting an equimolar amount of 2,4‐dichloroquinoline‐3‐carbonitrile ( 1 ) with ethyl mercaptoacetate ( 2 ). Ethyl 5‐alkyl‐5H‐1‐thia‐3,5,6‐triazaaceanfhrylene‐2‐carboxylates 9a‐c , novel perianellated tetracyclic heteroaro‐matics, were prepared by refluxing 4 with excess of primary amines 7a‐c to yield the corresponding amino‐thieno[3,2‐c]quinolines 8a‐c . Subsequent reaction with an excess of triethyl orthoformate (TEO) furnished 9a‐c . Reaction of 4 with TEO in Ac₂O at reflux, gave the simple acetylated compounds, thieno[3,2‐c]‐quinolines 12 and 13 . Refluxing 4 with benzylamine ( 7d ) gave 10 , and subsequent treatment with TEO gave the tetracyclic compound 11 . Refluxing 13 with an excess of alkylamines 7a‐d gave the fhieno[3,2‐c]quino‐lines 15 . Refluxing the aminothienoquinolines 8b with an excess of triethyl orthoacetate gave thieno[3,2‐c]quinoline 17 , while heating with Ac₂O gave 18 and 19 , with small amounts of 16 . Reaction of 8a,b with ethyl chloroformate and phenylisothiocyanate generated the new 1‐thia‐3,5,6‐triazaaceanthrylenes 20a,b and 21a,b , respectively. Diazotization of 8a‐c afforded the novel tetracyclic ethyl 5‐alkyl‐5H‐1‐fhia‐3,4,5,6‐tetraazaaceanthrylene‐2‐carboxylates 22a‐c in good yields.     

Polymerization of methyl methacrylate in the presence of iron(II) complex with tetradentate nitrogen ligands under conditions of atom transfer radical polymerization

Four tetradentate nitrogen ligands, viz. dichloro{[N,N^′-diphenyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (1), {[N,N^′-dioctyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (2), {[N,N^′-dibenzyl-N,N^′-di(quinoline-2-methyl)]-1,2-ethylene diamine} (3), and (1R,2R)-(−)-N,N^′-di(quinoline-2-methyl) di-iminocyclohexane (4), were investigated as novel complexing ligands in iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate where ethyl-2-bromoisobutyrate was the initiator in o-xylene at 90 °C. With ligands 1 and 2 the experimental molecular weights increased gradually with monomer conversion. High to moderate conversions (87%, 43%) were obtained in relatively short times (90 min for 1 and 30 min for 2), which indicates an efficient catalyst system, but after these times a dramatic increase in viscosity of the polymerization medium led to loss of control. It is noteworthy that polymerization proceeded in a controlled manner with ligand 1, which has two rather bulky substituents on the N-atom. Such bulky ligands did not work for a copper-based system, where they led to excessive terminations or other side reactions. When the bulkiness of the substituents was significantly increased, as in ligand 3, a decrease in polymerization rate and loss of control occurred. Ligand 4 was less efficient than the other ligands, probably because the ethylene bridge was replaced by cyclohexane bridge.     

The uses of 1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin on the solid phase extraction of traces heavy metal ions and their determinations by atomic absorption spectrometry

1-(2-pyridylazo) 2-naphtol (PAN) impregnated Ambersorb 563 resin was used as solid phase extractor of copper, nickel, cadmium, lead, chromium and cobalt ions in aqueous solutions prior to their atomic absorption spectrometric determinations. The parameters including pH, sample volume, matrix effects were also investigated. The relative standard deviation (R.S.D.) of the combined method of sample treatment, preconcentration and determination with atomic absorption spectrometry is generally lower than 10%. The limit of detection was between 0.21 and 1.4 μg l⁻¹. The results were used for preconcentration of analyte ions from natural water samples. The method was also applied to a stream sediment standard reference material (GBW7309) for the determination of Cu, Ni, Cd, Pb, Cr and Co.     

LC-ESI-MS/MS profiling of alkaloids and antiproliferative activity of Pachypoduim lamerei drake leaves

Abstract

In the present study, evaluation of the antiproliferative activity of Pachypodium lamerei Drake leaves (family Apocyaceae) against human breast cancer cell lines MDA-MB-231 was done for the total methanolic extract, crude alkaloidal mixture and ursolic acid using the MTT colorimetric assay. The methanolic extract showed the strongest antiproliferative activity followed by ursolic acid and crude alkaloidal fraction with an IC₅₀ equal to 6.2, 14.55 and 56.3?µg/ml respectively compared to oleocanthal. It is the first record for the LC/ESI-MS/MS alkaloidal profiling of the leaves of P. lamerei. Seven alkaloids were tentatively identified according to their fragmentation patterns. Four alkaloids were related to the parent indole class and two alkaloids belong to the quinoline class in addition to one steroidal alkaloid with a pregnan nucleus. Phytochemical investigation of the methanolic extract led to the isolation of three triterpenoidal compounds including ursolic acid, 11,12-didehydroursolic acid lactone and ursolic acid lactone.     

A New Neutral Carrier for Silver Ions Based on a Bis(Thiothiazole) Derivative and its Evaluation in Membrane Electrodes

Membrane electrodes based on 2,2-dithiobis(benzothiazole), DTBBT, as a neutral carrier for silver ions are described. Silver-selective membrane electrodes formulated with 2wt% DTBBT ionophore and 50mol% TFPB in an FPNPE plasticized poly (vinyl chloride) exhibited near-Nernstian responses towards silver ions (60.3±0.5mVdecade^–1) over a wide silver ion activity range of 0.83µM to 94mM. Increasing the amount of anionic sites, TFPB, to 100 or 150mol% (relative to the DTBBT weight) resulted in super-Nernstian responses toward silver ions. Membrane electrodes prepared using a low dielectric constant plasticizer, however, exhibited sub-Nernstian responses. Polymer membrane electrodes with optimal composition (i.e., 2wt% DTBBT, 50mol% TFPB in FPNPE plasticized poly(vinyl chloride)) exhibited high potentiometric selectivity towards silver ions over alkali, alkaline earth, transition metal ions, as well as heavy metal ions such as Hg²⁺ and Pb²⁺. A good correlation was found between the potentiometric selectivity coefficients and the change in the UV-visible spectra of the ionophore upon exposure to different metal ions. The overall performance of the silver-selective membrane electrodes based on DTBBT ionophore, which is available at low cost, was found to be comparable to the performance of silver electrodes prepared with Fluka silver ionophore-IV. A DTBBT-based silver electrode was used as an indicator electrode for titrations of silver ions using standard sodium chloride solutions. Sharp inflections occur at the end point, and the data obtained showed 99.4% recovery with a standard deviation of 0.7% (n=3). In addition, the applicability of the DTBBT-based silver-selective electrode is illustrated by measuring the silver concentrations in natural water spiked with silver nitrate and by analyzing the silver in electroplating wastewater samples. The results obtained utilizing a DTBBT-based silver electrode showed very good agreement with the standard methods of analysis.     

Phase-selective a.c. adsorptive stripping voltammetry of lumazine on a hanging mercury drop electrode

The electrochemical behavior of lumazine (LMZ), an important antibacterial agent, has been studied at the hanging mercury drop electrode (HMDE). The nature of the process taking place at the HMDE was clarified. Its adsorption behavior at HMDE has been studied by using a.c and cyclic voltammetry (CV). Both the molecule and its reduced product appeared to be adsorbed at the surface of the electrode. Controlled adsorptive accumulation of LMZ on the HMDE provides the basis for the direct stripping measurement of that compound in the subnanomolar concentration level. Experimental and instrumental parameters for the quantitative determination were optimized. Phase-selective a.c voltammetry provided the best signal and gave a detection limit of 0.15 microg L(-1) (9.0 x 10(-10) mol/L) LMZ in aqueous solution. Molecules or ions which may interfere were studied.     

Solid-phase synthesis of arginine-containing peptides and fluorogenic substrates using a side-chain anchoring approach

Attachment of an amino acid to a solid support by its side chain is sometimes necessary to take advantage of an alpha-carboxylic group available for diverse modifications, including the incorporation of a fluorophore for the preparation of fluorogenic substrates. In contrast to most other amino acids, anchoring the guanidinium group of an arginine to a resin requires the use of a supplementary linker. To avoid the usually multistep synthesis of such a linker as well as its difficult attachment to the guanidine group, we developed a simple method where the guanidine group is built on a Rink amide resin. Our strategy followed the steps of guanidine formation: (i) addition of an isothiocyanate derivative of ornithine to the amino group of a solid support, yielding Nomega-linked thiocitrulline; (ii) S-methylation of thiourea; (iii) guanidinylation using ammonium acetate. Cleavage of the resin generated the arginine-containing compound, the amine group of the resin becoming part of the guanidine. We have demonstrated the usefulness of this method by the synthesis of a series of fluorogenic substrates for trypsin-like serine proteases, which were obtained in high yield and purity. Then, our strategy also allowed generation from the same precursor differentially substituted arginine derivatives, including Nomega-methyl- and Nomega-ethylarginines. The ability to prepare such analogues together with the intermediates thiocitrulline and S-methylisothiocitrulline from a unique precursor while the alpha-amine and carboxylic groups remain available for modification also makes this method a powerful tool for combinatorial solid-phase synthesis of NO synthase inhibitors.     

Use of hexamminecobalt(III)-tricarbonatocobaltate(III) as a redox titrant for the potentiometric estimation of some organic compounds

Hexamminecobalt(III)-tricarbonatocobaltate(III) was prepared, and its bicarbonate solution was standardized against ferrous ammonium sulfate using Ferroin indicator. The Co solution was used as an oxidimetric reagent for the determination of organic systems.Hydroquinone as a reversible system undergoes fast electrochemical reactions, so it can be determined with the Co(III) complex, which acts as an irreversible titrant. Thus it can be determined with both visual and potentiometric methods. Standardized hydroquinone solutions in H₂SO₄ medium gave very similar results when determined potentiometrically against standard Co(III) solution. The acid medium is important for liberating Co(III) ions. Hydrochloric acid behaves similarly but perchloric acid interferes with the reaction. Diluting the hydroquinone solutions had no effect on the determinations. The potentiometric endpoint coincides with the discharge of the color if Ferroin has been present.p-Aminophenol, p-phenylenediamine, and Metol (p-hydroxy-N-methylaniline), which slow or hinder the electrochemical reaction, do not indicate a distinct potential change at the endpoint, so cannot be determined potentiometrically. Their chemical reactions are fast enough to be titrated visually against Co(III) complex using Ferroin indicator. Titration curves representing biamperometric measurements of these solutions fulfill these results.Hydrazine sulfate and isonicotinic acid hydrazide as irreversible systems cannot react with Co(III) and thus cannot be determined either potentiometrically or visually as both electrochemical and chemical reactions are slow to be recognized.     

Intermolecular interactions in (arene)chromium carbonyl compounds: prediction of chiral crystal packing from racemate structure

Six X-ray crystal structures are reported, all containing substituted triphenylmethanol derivative 4 either alone or as its mono or bis(chromium tricarbonyl) complexes. All four chromium complexes studied crystallize with two independent molecules in the crystallographic asymmetric unit. It is demonstrated that from the X-ray crystal structure of the acentric racemic (+/-)-(1pR,1' 'R)(1pS,1' 'S)-[Cr(CO)(3)(eta(6)-t-BuC(6)H(3)(CMeOMe)CPh(2)OH)], (+/-)-3, it is possible to deduce the 4-fold helical structure of the chiral (-)-(1pR,1' 'R) isomer, (-)-3. The bimetallic derivatives demonstrate the ability to control intermolecular interactions by the positioning of relative stereochemistry.     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.