Strong electromagnetic field localization near the surface of hemicylindrical particles

We theoretically study the forward and backward plane wave illuminations of hemicylindrical dielectric particles with different radii and refractive indices. Near field effects providing strong field enhancement and narrow beam width are obtained from hemicylindrical particles, which can be associated with whispering gallery modes (WGMs) and photonic nano-jets (PNJs). It should be noted that existence of PNJ and WGM effects depending on forward/backward light illuminations is studied for the first time in all-dielectric hemicylindrical particles. Compared to dielectric cylinders, hemicylindrical aided PNJs show relatively small influences of WGM regime, when exists, to PNJ behavior. Under the backward excitation, on the other hand, typical nano-jet is produced. The designed hemicylindrical structure could be implemented in high-resolution optical imaging and sensing applications.     

Electrical and chemical characteristics of nano-meter gold encapsulated in mesoporous and microporous channels and cages of FSM-16 and Y zeolites

The dc and ac conductivities as well as the dielectric constant () were measured for different zeolites encapsulated gold (AuCl₃) samples at different temperatures (300-500 K) and various frequencies (5 kHz-1 MHz). The conductivity was found to change in the order Au/FSM-27>Au/NaY>Au/FSM-47. Sorbed water contained inside zeolites assists greatly the proton mobility (zeolite protons) and the ion mobility (Na⁺ and Au⁺) and hence enhance the electric conduction in the temperature range 300-373 K. Raising the temperature over 373 K induces dehydration effect that assists the metallic gold formation and thus a dramatic loss in conductivity was revealed. The conduction mechanism was expected to be partially ionic and partially electronic. The IR study showed that the exposure of Au zeolites to CO gas produced a characteristic band of Au⁺-CO at 2180 cm⁻¹ that tends to decrease with temperatures and even vanishes at 376 K in favor of Au⁰-CO at 2128 cm⁻¹. Similarly, a phase transition at 338 K, that occurs in the range 300-376 K, was confirmed by DTA to further emphasize the temperature regions of either Au⁺ cations (338 K) or Au⁰ (376 K) formation.     

Fabrication and characterization of zinc oxide anti-reflective coating on flexible thin film microcrystalline silicon solar cell

This paper studies the fabrication and characterization of 80 nm zinc oxide anti-reflective coating (ARC) on flexible 1.3 μm thin film microcrystalline silicon (μc-Si) solar cell. High resolution X-ray diffraction (HR-XRD) shows a c-axis oriented ZnO (0 0 2) peak (hexagonal crystal structure) at 34.3° with full width at half maximum (FWHM) of 0.3936°. Atomic force microscope (AFM) measures high surface roughness root-mean-square (RMS) of the layer (50.76 nm) which suggests scattering of the incident light at the front surface of the solar cell. UV–vis spectrophotometer illustrates that ZnO ARC has optical transmittance of more than 80% in the visible and infra-red (IR) regions and corresponds to band gap (E_g) of 3.3 eV as derived from Tauc equation. Inclusion of ZnO ARC successfully suppresses surface reflectance from the cell to 2% (at 600 nm) due to refractive index grading between the Si and the ZnO besides quarter-wavelength (λ/4) destructive interference effect. The reduced reflectance and effective scattering effect of the incident light at the front side of the cell are believed to be the reasons why short-circuit current (I_sc) and efficiency (η) of the cell improve.     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

Spectroscopic and Conductive Properties of Some Charge Transfer Complexes of Iodine

Abstract

The interaction of iodine with donor bases such as neutral red (NR) and 1, 10 -phenanthroline (Ph) have been studied spectrophotometrically in C₂H₅OH. The results indicate the formation of 2:3 charge transfer complexes of the type (base)₂3I₂. Mass, Raman and ¹H NMR spectra have been recorded for each complex. I₃ ^? and I₂ species are observed in these complexes. In addition, the d.c. conductivity is measured in the range (300–400) K°. The energy gap of the ionic conduction has been calculated. The conduction process is thought to involve iodide transfer between polyanions.     

An energy-transport model for semiconductors derived from the Boltzmann equation

An energy-transport model is rigorously derived from the Boltzmann transport equation of semiconductors under the hypothesis that the energy gain or loss of the electrons by the phonon collisions is weak. Retaining at leading order electron-electron collisions and elastic collisions (i.e., impurity scattering and the elastic part of phonon collisions), a rigorous diffusion limit of the Boltzmann equation can be carried over, which leads to a set of diffusion equations for the electron density and temperature. The derivation is given in both the degenerate and nondegenerate cases.     

Cardiovascular magnetic resonance for the assessment of pulmonary arterial hypertension: toward a comprehensive CMR exam

Pulmonary arterial hypertension (PAH) is a progressive disorder characterized by abnormally increased blood pressure of the pulmonary circulation. The clinical course of the untreated PAH involves rapid progression to right ventricular (RV) failure and death. Right heart catheterization is the gold-standard method for confirming PAH. However, the technique's invasiveness and associated risks preclude its use on a regular basis. Different imaging techniques have been implemented for evaluating PAH, including echocardiography, computed tomography and nuclear medicine. However, these techniques have their own limitations. During the past decade, cardiovascular magnetic resonance (CMR) has been increasingly used for the evaluation of different cardiovascular diseases, including PAH, due to its high resolution, high tissue contrast, and the plethora of anatomical and physiological parameters that can be measured with this modality. This article presents an up-to-date review of the implementation of CMR for evaluating PAH. This is achieved by describing a comprehensive CMR protocol that includes several imaging sequences for assessing different cardiovascular parameters pertaining to PAH. In contrast to the previously published articles, the presented CMR protocol evaluates both RV function and pulmonary artery hemodynamics, which are both affected in PAH. Each imaging sequence is explained along with the image analysis steps required for deriving the cardiovascular parameters of interest. Then, based on an extensive literature review, the article illustrates the significance of the derived cardiovascular parameters and their association with PAH. The article concludes with a discussion of the advantages of the proposed CMR exam for better understanding of the disease pathophysiology and treatment planning.     

Search for the standard model Higgs boson in the diphoton decay channel with 4.9 fb(-1) of pp collision data at √s=7 TeV with ATLAS

A search for the standard model Higgs boson is performed in the diphoton decay channel. The data used correspond to an integrated luminosity of 4.9 fb(-1) collected with the ATLAS detector at the Large Hadron Collider in proton-proton collisions at a center-of-mass energy of √s=7 TeV. In the diphoton mass range 110-150 GeV, the largest excess with respect to the background-only hypothesis is observed at 126.5 GeV, with a local significance of 2.8 standard deviations. Taking the look-elsewhere effect into account in the range 110-150 GeV, this significance becomes 1.5 standard deviations. The standard model Higgs boson is excluded at 95% confidence level in the mass ranges of 113-115 GeV and 134.5-136 GeV.