Solvent-Free Crossed Aldol Condensation of Cyclic Ketones with Aromatic Aldehydes Assisted by Microwave Irradiation

Summary. A fast alumina-promoted crossed aldol-condensation reaction of aldehydes and cyclic ketones under microwave irradiation is described. This process is simple, efficient, and environmentally benign and proceeds in fairly high yield without any self-condensation.     

Discussion on complexation reactions between dicyclohexyl-18-crown-6 (DCH18C6) with Na+, K+, Cs+, Rb+, and Tl+ metal cations in acetonitrile-water binary mixtures

The complex formation between Na⁺, K⁺, Cs⁺, Rb⁺ and Tl⁺ metal cations with macrocyclic ligand, dicyclohexyl-18-crown-6 (DCH18C6) was studied in acetonitrile-water (AN-H₂O) binary systems at different temperatures using conductometric method. DCH18C6 forms 1:1 complexes with these metal cations. The stability constants of the complexes were obtained from fitting of molar conductivity curves using a computer program Genplot. The results show that the selectivity order of DCH18C6 for the metal cations in acetonitrile-water mixtures (AN = 25.3 and 50.4 mol %) is: Tl⁺ > K⁺ > Rb⁺ > Cs⁺ > Na⁺. A non-linear behaviour was observed between the log K _f of the complexes versus the composition of the mixed solvent which it related to changes of acidity, basicity, polarity and also polarizability of AN-H₂O mixtures with the composition of this binary solution. The values of standard enthalpy changes (ΔH _s⁰) for complexation reactions were obtained from the slope of the van’t Hoff plots and the changes in the standard entropy (ΔS _s⁰) were calculated from the relationship: ΔG _s,298.15⁰ = ΔH _s⁰ − 298.15ΔS _s⁰. The obtained results show that in most cases, the complexes are enthalpy stabilized but entropy destabilized. Original Russian Text ? M.H. Soorgi, G.H. Rounaghi, M.S. Kazemi, 2008, published in Zhurnal Obshchei Khimii, 2008, vol. 78, No. 10, pp. 1627–1632.     

Direct synthesis of nitrogen-doped graphene on platinum wire as a new fiber coating method for the solid-phase microextraction of BXes in water samples: Comparison of headspace and cold-fiber headspace modes

In this work, a new solid-phase microextraction fiber was prepared based on nitrogen-doped graphene (N-doped G). Moreover, a new strategy was proposed to solve problems dealt in direct coating of N-doped G. For this purpose, first, Graphene oxide (GO) was coated on Pt wire by electrophoretic deposition method. Then, chemical reduction of coated GO to N-doped G was accomplished by hydrazine and NH₃. The prepared fiber showed good mechanical and thermal stabilities. The obtained fiber was used in two different modes (conventional headspace solid-phase microextraction and cold-fiber headspace solid-phase microextraction (CF-HS-SPME)). Both modes were optimized and applied for the extraction of benzene and xylenes from different aqueous samples. All effective parameters including extraction time, salt content, stirring rate, and desorption time were optimized. The optimized CF-HS-SPME combined with GC-FID showed good limit of detections (LODs) (0.3–2.3 μg/L), limit of quantifications (LOQs) (1.0–7.0 μg/L) and linear ranges (1.0–5000 μg/L). The developed method was applied for the analysis of benzene and xylenes in rainwater and some wastewater samples.     

Structure and chromotropism properties of an unsymmetrical alkoxo-bridged nickel(II) cubane-like complex

A new tetranuclear cubane-like complex, [Ni₄(L)₄Cl₄(H₂O)₃(EtOH)]·(H₂O), has been synthesized from the reaction of a metal salt with the bidentate ligand 2-hydroxymethylpyridine (LH), and its crystal structure, spectroscopic and chromotropic properties have been studied. The complex has a [Ni₄O₄] core comprising a distorted cubane arrangement, of which four nickel(II) ions were bridged by μ₃-alkoxo moieties. Each nickel(II) was coordinated to three μ₃-alkoxo oxygens, one pyridine nitrogen and one chloride. The peripheral ligation was completed by an oxygen atom of water or ethanol ligand, which participated in intramolecular hydrogen bonding. Chromotropism properties of the complex including solvato-, thermo-, and ionochromism were investigated. The complex displayed strong ionochromism and shows high-sensitive and selective activity toward CN^? and SCN^? anions in the presence of other halides and pseudo-halides. The solvatochromic property of the complex was analyzed by a multi-parametric equation using SPSS/PC software. The stepwise multiple linear regression method demonstrated that the acceptor power of the solvent plays the most important role in the observed negative solvatochromism of the compound. It shows reversible thermochromism in solution due to loss of the weakly coordinated water and ethanol from the nickel(II) units.     

Fe3O4 MNPs-DETA/Benzyl-Br3: A new magnetically reusable catalyst for the oxidative coupling of thiols

We report a new strategy to immobilize a bromine source on the surface of magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs-DETA/Benzyl-Br₃) leading to a magnetically recoverable catalyst, which exhibits high catalytic efficiency in oxidative coupling of thiols to the disulfides (89–98%). The Fe₃O₄ MNPs-DETA/Benzyl-Br₃ catalyst was fabricated by anchoring 3-chloropropyltrimethoxysilane (CPTMS) on magnetic Fe₃O₄ nanoparticles, followed with N-benzylation and reaction with bromine in tetrachloridecarbon. The resulting nanocomposite was analyzed by a series of characterization techniques such as FT-IR, SEM, TGA, VSM and XRD. The catalyst could be recovered via magnetic attraction and could be recycled at least 5 times without appreciable decrease in activity.     

Chemical composition,antimicrobial and antioxidant activities of the essential oil of Psammogetoncanescens

This study reports the chemical composition, antimicrobial activity and antioxidant properties of Psammogeton canescens essential oil (EO) and its main compounds. The EO was obtained from the aerial parts of P. canescens by hydrodistillation and analysed by using GC/MS. The main constituent was β-bisabolene (25%), followed by α-pinene (20%), apiole (15.34%), γ-terpinene (7.34%), p-cymene (5.35%), β-pinene (5.41%), camphene (5.12%), dill apiole (5%), myrcene (4.54%), colchicine (0.56), sylvestrene (0.56%), β-caryophyllene (0.45%), caryophyllene oxide (0.43%), (Z)-β-farnesene (0.32%), cembrene (0.21%), folic acid (0.21%), germacrene D (0.14) and β-sesquiphellandrene (0.13). β-Bisabolene exhibited strong antioxidant activity (14 ± 0.8 μg/mL). The EO of P. canescens was particularly active against Candida albicans and Escherichia coli, with the lowest minimum inhibitory concentration and minimum bactericidal/fungicidal concentration values. In conclusion, these results support the use of the EO and its main compounds for their antioxidant properties and antimicrobial activity.     

An electron paramagnetic resonance study on irradiated triphenylphosphinselenid single crystal

The single crystals of triphenylphosphinselenid [C₁₈H₁₅PSe] were produced by slow evaporation of concentrated ethyl acetate solutions. These single crystals were exposed to ⁶⁰Co gamma (γ) rays with a dose speed of 0.980 kGy/h at the room temperature for 72 h. The free radical over the sample was observed using electron paramagnetic resonance (EPR)–X band spectrometer. The EPR spectra were recorded between 120 and 400 K. Furthermore, the sample irradiated was rotated in steps of 10° and analyzed for different orientations of the crystal in the magnetic field. Only one radical structure was determined on the molecule. The hyperfine constants of the sample were found to be anisotropic. The average values of these constants and value of g were calculated as following: g=2.007656, a_Se=37.47 G, a_P=27.44 G, a_Ha=17.28 G, and a_Hb=18.16 G.     

Production planning with uncertainty in the quality of raw materials: a case in sawmills

Motivated by sawmill production planning, this paper investigates multi-period, multi-product (MPMP) production planning in a manufacturing environment with non-homogeneous raw materials, and consequently random process yields. A two-stage stochastic program with recourse is proposed to address the problem. The random yields are modelled as scenarios with stationary probability distributions during the planning horizon. The solution methodology is based on the sample average approximation (SAA) scheme. The stochastic sawmill production planning model is validated through the Monte Carlo simulation. The computational results for a real medium capacity sawmill highlight the significance of using the stochastic model as a viable tool for production planning instead of the mean-value deterministic model, which is a traditional production planning tool in many sawmills.     

Biosynthesis of Silver Nanoparticles by <Emphasis Type="Italic">Geotricum</Emphasis> sp.

Nanoparticles are usually 1–100 nm in each spatial dimension considered as building blocks of the next generation of optoelectronics, electronics, and various chemical and biochemical sensors. In the synthesis of nanoparticles use of microorganisms emerges as an eco-friendly and exciting approach that reduce waste products (ultimately leading to atomically precise molecular manufacturing with zero waste); the use of nanomaterials as catalysts for greater efficiency in current manufacturing processes by minimizing or eliminating the use of toxic materials (green chemistry principles); the use of nanomaterials and nanodevices to reduce pollution (e.g. water and air filters); and the use of nanomaterials for more efficient alternative energy production (e.g. solar and fuel cells). Fungi have many advantages for nanoparticle synthesis compared with other organisms. In this study, Geotricum sp. found to successfully produce Ag nanoparticles. Geotricum sp. was grown in SDA (Sabro Dextrose Agar) medium at 25 ± 1 °C for 96 h. The mycelia were used to convert silver nitrate solution into nano-silver. Silver nanoparticles were synthesized using these fungi (Geotricum sp.) extracellularly. UV–VIS spectroscopy, Atomic Force Microscopy (AFM) and Scanning Electron Microscopy images shows the nanoparticle formation in the medium. Energy-dispersive X-ray spectroscopy (EDX) also confirmed that silver nanoparticles in the range of 30–50 nm were synthesized extracellularly. FTIR analyses confirmed the presence of amide (I) and (II) bands of protein as capping and stabilizing agent on the surface of nanoparticles.