Ketoconazol‐Triiodide Ion Pair Complex as a Suitable Carrier in an Iodide Selective Membrane Electrode

A novel membrane sensor for selective monitoring of iodide, consisting of a triiodide‐ketoconazole ion pair complex dispersed in a PVC matrix, plasticized with a mixture of 2‐nitrophenyl octyl ether and dioctylphtalate with unique selectivity toward iodide ions, is described. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The optimized membrane demonstrates a near‐Nernstian response for iodide ions over a wide linear range from 1.0 × 10^?2 to 1.0 × 10^?5 M, at 25 ± 1 °C. The electrode could be used over a wide pH range 3–10 and has the advantages of high selectivity, fast response time and good lifetime (over 4 months). It was successfully used as indicator electrode in potentiometric titrations and direct potentiometric assay of iodide ions.     

Nanostructured pure gamma-Fe2O3 via forced precipitation in an organic solvent

Pure maghemite, gamma-Fe(2)O(3), was prepared as ultra fine particles in the nanometer-sized range via the forced precipitation method in an organic solvent. The precipitation of iron(III) ions, from iron(III) chloride in 2-propanol led selectively to highly dispersed particles of ferrihydrite, which upon treatment with temperatures higher than 200 degrees C under dynamic vacuum resulted in high-surface-area particles of gamma-Fe(2)O(3). Precipitation in water also led to ferrihydrite, but the final product, after heating at 300 degrees C, contained a mixture of gamma-Fe(2)O(3) and alpha-Fe(2)O(3) (hematite). The precipitation from iron(III) nitrate in water resulted in goethite which was converted to hematite upon heating. On the other hand, the final product in 2-propanol was a mixture of maghemite and hematite. The products were characterized by FTIR, TGA, XRD, and gas sorption analysis. Nitrogen gas adsorption studies for the pure gamma-Fe(2)O(3) samples revealed mesoporous particles with high surface areas in the range of 70-120 m(2) g(-1) after heat treatment at 300 degrees C. The gamma-Fe(2)O(3) particles retained their gamma-phase as well as their mesoporous structure at relatively high temperatures, as high as 400 degrees C.     

Metallocene–methylaluminoxane catalyst for olefin polymerization. II. Bis-η5-(neomenthyl cyclopentadienyl)zirconium dichloride

Bis(neomenthyl cyclopentadienyl)zirconium dichloride/methyl aluminoxane (η⁵-(NMCp)₂ZrCl₂/MAO) catalyst has been investigated for ethylene polymerization. About 51% of the Zr forms active sites more or less instantaneously according to quenching with tritiated methanol. There is an initial drop of rate of polymerization, R_p, of about 30% which remains constant thereafter. The catalytic activity increases monotonically with temperature; it is proportional to [MAO]^1.75 at a constant [Zr] = 1.5 μM and proportional to [Zr]^?1.2 at a constant [MAO] = 64.5 mM. At very large [MAO]/[Zr], the catalyst has extremely high activity; κ_p = 5 × 10³ (Ms)^?1 at 50°C. There is also facile chain transfer to aluminum, κ = 0.14 s^?1 at 50°C. Both κ_p and κ are about 30 times greater than the corresponding rate constants for MgCl₂ supported TiCl₃ catalysts. The TiCl₃/MgCl₂ and (NMCp)₂/MAO catalysts have nearly the same activation energy for propagation (ca. 7 kcal/mol^?1). The higher activity of the latter is due to its larger preexponential factor in κ_p. The dependence of catalytic activity on the [MAO]/[Zr] ratio may be explained by rapid association-dissociation equilibria of MAO involving acid-base and/or electron deficient bridge complexation.     

Corrected Debye-Hückel analysis of surface complexation; III. Spherical particle charging including ion condensation

Statistical mechanics has been used to derive a model for the charging of a spherical particle in a salt solution to complement our experimental studies and gain a deeper understanding of the processes involved in surface complexation. Our chosen model goes beyond the equilibrium constants and the Gouy-Chapmann theory currently used in surface complexation models. The proton adsorption is taken to occur at a harmonic potential well on the surface characterized by a frequency v and a well depth u(0). Outside the particle surface there is a capacitor layer of width w(c) which is impenetrable to the salt ions. The diffuse screening of the charged particle is described by a corrected Debye-Hückel analysis accounting for ion size in the ion-ion interactions. To account also for nonlinear electrostatic response a layer of condensed counterions has been introduced. The criterion for the onset of ion condensation is that the electrostatic field exceeds a linear response criterion. Ion size effects are accounted for in terms of hole-corrected electrostatic energies and excluded volume. The model has been applied to titrated surface charge data on goethite (alpha-FeOOH) at various background concentrations and good agreement between the experimental data and the model was obtained. Both the size of the screening ions and the central particle size were shown to be of importance for the surface charge.     

Chemical composition and antimicrobial activity of the essential oils of Ferula latisecta and Mozaffariania insignis from Iran

The hydrodistilled oils from the aerial parts of Ferula latisecta and Mozaffariania insignis, which is endemic to Iran, were analyzed by GC and GC/MS. (Z)-Ocimenone (32.4%), (E)-ocimenone (20.3%), and cis-pinocarvone (11.4%) were the main components among the 22 constituents characterized in the oil of F. latisecta, representing 87.7% of the total components detected. Twenty-five compounds were identified in the oil of M. insignis, representing 99.0% of the total oil, with octyl acetate (41.1%), β-pinene (30.3%), and α-pinene (23.9%) as the main constituents. The essential oils were examined for their potential antimicrobial activities. Published in Khimiya Prirodnykh Soedinenii, No. 6, pp. 561–563, November–December, 2006.     

Flexible polyfluorinated bis-diazirines as molecular adhesives

Motivated by a desire to develop flexible covalent adhesives that afford some of the same malleability in the adhesive layer as traditional polymer-based adhesives, we designed and synthesized two flexible, highly fluorinated bis-diazirines. Both molecules are shown to function as effective crosslinkers for polymer materials, and to act as strong adhesives when painted between two polymer objects of low surface energy, prior to thermal activation. Data obtained from lap-shear experiments suggests that greater molecular flexibility is correlated with improved mechanical compliance in the adhesive layer.

Flexible, highly fluorinated covalent adhesives are synthesized, and are shown to afford comparable C–H insertion efficiency and adhesion strength relative to a rigid analogue, while providing improved mechanical compliance in the adhesion layer.     

Photocatalytic Activity of Supported Metal Nanoparticles and Single Atoms

Photocatalysis has been known as one of the promising technologies due to its eco-friendly nature. However, the potential application of many photocatalysts is limited owing to their large bandgaps and inefficient use of the solar spectrum. One strategy to overcome this problem is to combine the advantages of heteroatom-containing supports with active metal centers to accurately adjust the structural parameters. Metal nanoparticles (MNPs) and single atom catalysts (SACs) are excellent candidates due to their distinctive coordination environment which enhances photocatalytic activity. Metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and carbon nitride (g-C₃N₄) have shown great potential as catalyst support for SACs and MNPs. The numerous combinations of organic linkers with various heteroatoms and metal ions provide unique structural characteristics to achieve advanced materials. This review describes the recent advancement of the modified MOFs, COFs and g-C₃N₄ with SACs and NPs for enhanced photocatalytic applications with emphasis on environmental remediation.     

Bernstein operational matrix of fractional derivatives and its applications

In this paper, Bernstein operational matrix of fractional derivative of order α in the Caputo sense is derived. We also apply this matrix to the collocation method for solving multi-order fractional differential equations. The numerical results obtained by the present method compares favorably with those obtained by various collocation methods earlier in the literature.     

Green synthesis of ZnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by <Emphasis Type="Italic">Aloe albiflora</Emphasis> extract and its application as catalyst on the thermal decomposition of ammonium perchlorate

This work aimed the evaluation of pH influence in the obtainment of composites from palygorskite (PAL) and chitosan (CS). The materials PAL/CS-1 and PAL/CS-2 were obtained by similar methodology with modified pHs: 5.0 ± 0.5 and 11.0 ± 0.5, respectively. Both materials were evaluated for specific surface area analysis, elemental analysis, XRD, FTIR, thermal analysis, MEV and interaction drug composite, using 5-aminosalicylic acid (5-ASA) as model. The surface area analysis data showed the reduction in PAL/CS-2 related to CS presence on surface in contrast with PAL/CS-1, which corroborate with elemental analysis present nine times more of CS in PAL/CS-2 composition. Regarding to XRD data, the interaction of CS with PAL did not cause modification in clay structure in PAL/CS-2. These results were confirmed by FTIR data with the N–H deformation vibration in PAL/CS-2 while PAL/CS-1 was invariable to PAL. In thermal analysis, results were observed 60.2% residual mass to PAL/CS-2, which it was lower than PAL (87.2%) and PAL/CS-1 (86.7%), due to CS decomposition which had enthalpy energy of 62.1 J g^?1 K^?1, confirming the data previously cited. PAL/CS-2 presented 5-ASA adsorption of 7.9 mg g^?1, which was inferior to others probably caused by scarcity of active sites of PAL already occupied by CS. These results showed that pH control was fundamental to enhance efficiency of obtainment of composite in basic pH because the decrease in CS protonation degree increasing interaction between this one and PAL, although it contributed to decrease in 5-ASA adsorption due to low availability of interaction sites.