Finite element analysis of hydromagnetic flow and heat transfer of a heat generation fluid over a surface embedded in a non-Darcian porous medium in the presence of chemical reaction

An analysis is carried out to study the flow, chemical reaction and mass transfer of a steady laminar boundary layer of an electrically conducting and heat generating fluid driven by a continuously moving porous surface embedded in a non-Darcian porous medium in the presence of a transfer magnetic field. The governing partial differential equations are converted into ordinary differential equations by similarity transformation and are solved numerically by using the finite element method. The results obtained are presented graphically for velocity, temperature and concentration profiles, as well as the Sherwood number for various parameters entering into the problem.     

Response of thermal source in a transversely isotropic thermoelastic half-space with mass diffusion by finite element method

The two-dimensional problem of generalized thermoelastic diffusion material with thermal and diffusion relaxation times is investigated in the context of Lord-Shulman theory. As an application of the problem, a particular type of thermal source is considered and the problem is solved numerically by using a finite element method. The components of displacement, stress, temperature distribution, chemical potential, and mass concentration are obtained. The resulting quantities are depicted graphically for a special model. Appreciable effect of relaxation times is observed on various resulting quantities.     

Well‐defined polyisoprene‐grafted silica nanoparticles via the RAFT process

The preparation of well‐defined polyisoprene‐grafted silica nanoparticles (PIP‐g‐SiO₂ NPs) was investigated. Surface initiated reversible addition fragmentation chain transfer (SI‐RAFT) polymerization was used to polymerize isoprene from the surface of 15 nm silica NPs. A high temperature stable trithiocarbonate RAFT agent was anchored onto the surface of particles with controllable graft densities. The polymerization of isoprene mediated by silica anchored RAFT with different densities were investigated and compared to the polymerization mediated by free RAFT agents. The effects of different temperatures, initiators, and monomer feed ratios on the kinetics of the SI‐RAFT polymerization were also investigated. Using this technique, block copolymers of polyisoprene and polystyrene on the surface of silica particles were also prepared. The well‐defined synthesized PIP‐g‐SiO₂ NPs were then mixed with a polyisoprene matrix which showed a good level of dispersion throughout the matrix. These tunable grafted particles have potential applications in the field of rubber nanocomposites. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1493–1501     

Single-walled boron nitride nanotube as nano-sensor

Nowadays, the eye-catching characteristics of boron nitride nanotubes, in particular, the capability of sensing nano-objects, have opened up new prospects to develop the bio-/nano-sensing technologies. This research deals with physically affected single-walled boron nitride nanotubes (SWBNNT) as nano-sensors for sensing attached nanoscale objects. Three different boundary conditions including simply supported at both ends, clamped-free and clamped-clamped are considered to illustrate the vibrational behaviour of SWBNNTs as nano-sensor. The Rayleigh and Timoshenko beam theories are employed to model the SWBNNT. Also, the nonlocal strain gradient model is utilized to capture the size-dependent effects. One of the major factors in the scrutiny of mass nano-sensors is pertinent to the variation in frequency shift magnitudes against the number and mass weight values of attached nanoparticles. Herein, the effects of the nonlocal and material length scale parameters, the number and location of nano-objects, the rotary inertia and mass weight magnitudes of attached nanoparticles, the aspect ratio of SWBNNT, electrical potential and different boundary conditions on the variation in frequency shift and resonant frequency are analysed.     

Numerical study of flow-induced vibrations of cylinders under the action of nonlinear energy sinks (NESs)

An isolated two-dimensional circular cylinder with two linear degrees of freedom, parallel and perpendicular to the free-stream direction, and owning a nonlinear energy sink (NES) is investigated by fluid–structure interaction (FSI) simulations to assess vortex-induced vibrations (VIV) at moderate Reynolds numbers. Subsequently, the wake-induced vibration (WIV) of a pair of identical cylinders under the action of two NES in a tandem arrangement and in a proximity–wake interference regime is explored using the same approach. The NES parameters (mass, nonlinear stiffness and damping) are investigated to determine their effects on the dynamic response of a single degree of freedom (in transverse flow direction) coupled system by a reduced-order model based on an experimentally validated van der Pol oscillator. The CFD model coupled with FSI method is also validated against VIV experimental data for an isolated cylinder in a uniform flow. The study is aimed to investigate the effect of the passive suppression NES device on VIV and WIV. The amplitude response, trajectories of cylinder motion and temporal evolutions of vortex shedding are obtained by conducting a series of numerical simulations. It is found that placing a tuned NES in the cylinders can provide good suppression effect; however, the effectiveness is function of the reduced velocity.     

Spacer effect on triazole-linked sugar-based surfactants

A series of alkyl triazole glycoside surfactants, ATGs, differing in the length of the alkyl linker between the sugar and the triazole, was synthesized and investigated on their surfactant properties and phase behavior in water. The results indicate no significant impact of the linker on surface and interphase properties, whereas the phase behavior is affected. Higher affinity for the bicontinuous cubic phase potentially favors methylene-linked ATGs over higher homologs for drug-delivery applications. A comparison of glucose and xylose reveals a tendency for high Krafft points for propargyl xyloside based ATGs. This disfavors these surfactants with respect to both glucose analogs and higher homologs.     

Attraction behaviour of Anagrus nilaparvatae to remote lemongrass (Cymbopogon distans) oil and its volatile compounds

Utilisation of Anagrus nilaparvatae is a promising and effective method for planthoppers manipulation. Twenty-seven components of remote lemongrass (Cymbopogon distans) oil were identified by GC/MS and nine volatiles were selected for behavioural experiments. In this study, we noted that the remote lemongrass oil was attractive to female A. nilaparvatae at concentrations of 0.1 and 1 mg/L. α-Pinene, β-pinene, eucalyptol, carveol and D-carvone attracted female wasps in the dose-dependent bioassays. Blend 1 (a mixture of eucalyptol, D-carvone, carveol, α-pinene, and β-pinene with ratios of remote lemongrass oil volatiles of 625:80:11:5:3) attracted female wasps at 10 mg/L, while blend 2 (a mixture of the same five volatiles at the same loading ratio) attracted them at 0.1 and 1 mg/L. These results suggested that plant essential oils could be attractants for natural enemies to control pests. The ratios of volatiles in the mixtures affect the attractiveness of the synthetic mixtures.     

Green synthesis of ZnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles by <Emphasis Type=Italic>Aloe albiflora</Emphasis> extract and its application as catalyst on the thermal decomposition of ammonium perchlorate

This work aimed the evaluation of pH influence in the obtainment of composites from palygorskite (PAL) and chitosan (CS). The materials PAL/CS-1 and PAL/CS-2 were obtained by similar methodology with modified pHs: 5.0 ± 0.5 and 11.0 ± 0.5, respectively. Both materials were evaluated for specific surface area analysis, elemental analysis, XRD, FTIR, thermal analysis, MEV and interaction drug composite, using 5-aminosalicylic acid (5-ASA) as model. The surface area analysis data showed the reduction in PAL/CS-2 related to CS presence on surface in contrast with PAL/CS-1, which corroborate with elemental analysis present nine times more of CS in PAL/CS-2 composition. Regarding to XRD data, the interaction of CS with PAL did not cause modification in clay structure in PAL/CS-2. These results were confirmed by FTIR data with the N–H deformation vibration in PAL/CS-2 while PAL/CS-1 was invariable to PAL. In thermal analysis, results were observed 60.2% residual mass to PAL/CS-2, which it was lower than PAL (87.2%) and PAL/CS-1 (86.7%), due to CS decomposition which had enthalpy energy of 62.1 J g^?1 K^?1, confirming the data previously cited. PAL/CS-2 presented 5-ASA adsorption of 7.9 mg g^?1, which was inferior to others probably caused by scarcity of active sites of PAL already occupied by CS. These results showed that pH control was fundamental to enhance efficiency of obtainment of composite in basic pH because the decrease in CS protonation degree increasing interaction between this one and PAL, although it contributed to decrease in 5-ASA adsorption due to low availability of interaction sites.     

Static Headspace GC/MS Method for Determination of Methanol and Ethanol Contents,as the Degradation Markers of Solid Insulation Systems of Power Transformers

Methanol in insulating oil has been proposed as a new marker for condition assessment of the solid insulation system of power transformers. In the current work, as a first step of using the new marker, an analytical static headspace gas chromatography/mass spectrometry method has been developed, optimized, and validated to measure methanol and ethanol contents in the insulating mineral oil. The analyzing setup consists of a 6890 N gas chromatograph equipped with a 5973 network mass spectrometer (MS) in the absence of a costly headspace autosampler, and the chromatography separation was performed on a 60 m × 320 µm × 0.5 µm VF-WAXms GC column. Calibration curves have been provided using several concentrations of the alcohols, and also limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation percentage (RSD%) have been determined.