DFT studies on the tetranuclear cubane complex [Ni4(ampd)4(Cl4)]·MeCN

Density functional theory (DFT) is used to investigate the structural properties of Ni(II) cubane [Ni₄(ampdH)₄Cl₄]·MeCN. The structural features and ground state geometry calculations are computed at the B3LYP/6-31G* (LANL2DZ) level of theory. We shed light on the highest occupied molecular orbital and lowest unoccupied molecular orbital. The absorption spectrum is calculated using time-dependent DFT. The absorption wavelengths are calculated using different functionals, i.e., pw91pw91, B3LYP, BHandHLYP, CAM-B3LYP, LC-BLYP, and M06. The LC-BLYP is in good agreement with the experimental data.     

Skin‐worn Soft Microfluidic Potentiometric Detection System

A flexible skin‐mounted microfluidic potentiometric device for simultaneous electrochemical monitoring of sodium and potassium in sweat is presented. The wearable device allows efficient natural sweat pumping to the potentiometric detection chamber, containing solid‐contact ion‐selective Na⁺ and K⁺ electrodes, during exercise activity. The fabricated microchip electrolyte‐sensing device displays good analytical performance and addresses sweat mixing and carry‐over issues of early epidermal potentiometric sensors. Such soft skin‐worn microchip platform integrates potentiometric measurement, microfluidic technologies with flexible electronics for real‐time wireless data transmission to mobile devices. The new fully integrated microfluidic electrolyte‐detection device paves the way for practical fitness and health monitoring applications.     

Growth Orientation of the Mechanosynthesized Fluorapatite-Based Composite Nanopowders: Influence of Subsequent Thermal Treatment

Growth orientation of fluorapatite–zirconia nanopowders was investigated after mechanical activation and thermal annealing process in the range of 600–1,300 °C for 1 h. Results revealed that during heating of the composite nanopowders the transition of the monoclinic zirconia to tetragonal form and its stabilization by calcium fluoride originating from the decomposition of fluorapatite as well as the formation of a solid solution of calcium fluoride in zirconia occurred. The influence of annealing on the growth orientation of fluorapatite–zirconia composite nanopowders indicated that the crystal growth of fluorapatite was preferentially accentuated on the (002) face in the direction of the crystallographic c-axis after heat treatment. Based on FE–SEM observations, the experimental outcome was composed of both agglomerates and fine particles (~33 nm) after 600 °C, while annealing of the sample at 1,300 °C demonstrated the occurrence of abnormal grain growth.     

Rates of intra- and intermolecular electron transfers in hydrogenase deduced from steady-state activity measurements

Electrons are transferred over long distances along chains of FeS clusters in hydrogenases, mitochondrial complexes, and many other respiratory enzymes. It is usually presumed that electron transfer is fast in these systems, despite the fact that there has been no direct measurement of rates of FeS-to-FeS electron transfer in any respiratory enzyme. In this context, we propose and apply to NiFe hydrogenase an original strategy that consists of quantitatively interpreting the variations of steady-state activity that result from changing the nature of the FeS clusters which connect the active site to the redox partner, and/or the nature of the redox partner. Rates of intra- and intermolecular electron transfer are deduced from such large data sets. The mutation-induced variations of electron transfer rates cannot be explained by changes in intercenter distances and reduction potentials. This establishes that FeS-to-FeS rate constants are extremely sensitive to the nature and coordination of the centers.     

Synthesis, experimental and theoretical characterization of N,N'-dipyridoxyl (1,4-butanediamine) Schiff-base ligand and its Cu(II) complex

A new N,N'-dipyridoxyl(1,4-butanediamine) [=H(2)BS] Schiff-base ligand and its Cu(II) salen complex, [Cu(BS)(H(2)O)(CH(3)OH)], were synthesized and characterized by IR, UV-vis, (1)H NMR, mass spectrometry and elemental analysis. Also, full optimization of the geometries, (1)H NMR chemical shifts (for the H(2)BS) and vibrational frequencies were calculated by using density functional theory (DFT) method. Structure of the H(2)BS ligand is not planar, i.e. two pyridine rings are not in the same plane. In the structure of the Cu complex, the Schiff-base ligand acts as a dianionic tetradentate ligand in N, N, O(-), O(-) manner. The coordinating atoms of BS(2-) occupy equatorial positions of the octahedral complex, where the H(2)O and CH(3)OH ligands locate at axial positions. The calculated results are in good agreement with the experimental data, confirming the suitability of the proposed and optimized structures for the H(2)BS ligand and its Cu complex.     

Heat-resistant and soluble fluorinated poly(amide imide)s based on non-coplanar ortho-linked diimide-dicarboxylic acid

A series of novel fluorinated heat-resistant poly(amide imide)s (PAIS) based on non-coplanar diimide-diacid monomer (DIDA) were synthesized and characterized. The poly(amide imide)s were obtained in high yields and possessed inherent viscosities in the range of 0.47-0.91 dL g⁻¹. All of the polymers were amorphous in nature, showed outstanding solubility and could be readily soluble in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidinoned, dimethyl sulfoxide, N,N-dimethylformamide, pyridine and tetrahydrofuran. Glass transition temperatures were in the range of 221-263 °C, as determined by differential scanning calorimetry. Degradation temperatures for 10% weight loss occurred all above 520 °C and char yields was more than 50% at 700 °C in nitrogen atmosphere. Moreover, these PAIs possessed low refractive indexes (n = 1.58-1.59), birefringence (Δn = 0.008-0.013), and dielectric constants (? ≈ 2.5) due to the trifluoromethyl pendent groups and ortho-catenated aromatic rings that interrupt chain packing and increase free volume.     

Validated HPTLC and HPLC methods for determination of fluorometholone and sodium cromoglycate in presence of their impurities and degradation products; application to kinetic study and on rabbit aqueous humor

Fluorometholone (FLM) and Sodium Cromoglycate (CMG) are co-formulated in ophthalmic preparation and showed marked instability under different conditions. Two specific, sensitive and precise stability-indicating chromatographic methods have been developed and validated for their determination in the presence of their degradation products and FLM impurity. Ten components were efficiently separated by them. The first method was HPTLC-spectrodensitometry, where the separation was achieved using silica gel 60?F₂₅₄ HPTLC plates and developing system of ethyl acetate: methanol (9:1, v/v). The second method was a reversed phase HPLC associated with kinetic study of the degradation process and was successfully applied for determination of the studied compounds in spiked rabbit aqueous humor. The mobile phase was acetonitrile: methanol: 0.05?M potassium dihydrogenphosphate (0.1% trimethylamine); pH 2.5, adjusted with orthophosphoric acid (20: 30: 50, by volume). In both methods, the separated components were detected at 240?nm and system suitability was checked. Good correlation was obtained in the range of 0.10–24.00 and 0.20–48.00?µg band^?1, for FLM and CMG by HPTLC. While for HPLC, the linearity ranges from 0.01–50.00 and 0.05–50.00?µg?mL^?1 for both drugs. The methods were applied in pharmaceutical formulation, where they were compared to the reported method with no significant difference.     

Photocatalytic Activity of Supported Metal Nanoparticles and Single Atoms

Photocatalysis has been known as one of the promising technologies due to its eco-friendly nature. However, the potential application of many photocatalysts is limited owing to their large bandgaps and inefficient use of the solar spectrum. One strategy to overcome this problem is to combine the advantages of heteroatom-containing supports with active metal centers to accurately adjust the structural parameters. Metal nanoparticles (MNPs) and single atom catalysts (SACs) are excellent candidates due to their distinctive coordination environment which enhances photocatalytic activity. Metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and carbon nitride (g-C₃N₄) have shown great potential as catalyst support for SACs and MNPs. The numerous combinations of organic linkers with various heteroatoms and metal ions provide unique structural characteristics to achieve advanced materials. This review describes the recent advancement of the modified MOFs, COFs and g-C₃N₄ with SACs and NPs for enhanced photocatalytic applications with emphasis on environmental remediation.     

Energy dispersive X-ray fluorescence analysis of chloride in reforming catalysts

A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts.