Profiling of N-acyl-homoserine lactones by liquid chromatography coupled with electrospray ionization and a hybrid quadrupole linear ion-trap and Fourier-transform ion-cyclotron-resonance mass spectrometry (LC-ESI-LTQ-FTICR-MS)

A method for the comprehensive profiling of the N-acyl-homoserine lactone (AHL) family of bacterial quorum-sensing molecules is presented using liquid chromatography (LC) coupled to a hybrid quadrupole linear ion trap (LTQ) and Fourier-transform ion-cyclotron-resonance mass spectrometer (FTICR). We demonstrate an increase in signal intensity in MS with electrospray ionization (ESI) of the protonated molecules, [M + H](+), by using acetonitrile (ACN) instead of methanol (MeOH) as the organic solvent under the conditions in which the samples were supplied to the probe by direct infusion at constant flow rates. The presence of ACN prevents the formation of methanol adducts such as [M + MeOH + H](+) and [M + MeOH + Na](+), while also lowering the signal intensity of sodiated [M + Na](+) ions. Sensitivity of these signaling molecules in terms of signal-to-noise ratio (S/N) using low-resolution LTQ-MS and high-resolution FTICR-MS were compared under reversed-phase (RP) LC separations with ESI interface. Special emphasis was paid to the choice of the separation column, its elution conditions and detection of the major AHL compounds produced by the Serratia liquefaciens strain ATCC 27592. The most promising results were obtained using a RP C16-amide column eluted with a linear mobile phase gradient ACN/H(2)O containing 0.1% formic acid. The whole set of AHL homologs in bacterial extracts was detected in the extracted-ion chromatographic (XIC) mode, and the calculations of molecular formulae were performed by including the isotopic pattern. This mode of displaying data, with a very narrow mass-to-charge ratio window (i.e. +/- 0.0010 as m/z unit) around each selected ion, has allowed the identification of all the eight known homoserine lactones, viz. C(4)-HSL, 3-oxo-C(6)-HSL, C(6)-HSL, 3-oxo-C(8)-HSL, C(8)-HSL, C(10)-HSL, C(12)-HSL and C(14)-HSL. In addition, at least four uncommon signaling mediators previously unreported, namely, 3-oxo-C(10:1)-HSL, 3-oxo-C(11:2)-HSL, 3-oxo-C(13:2)-HSL and 3-OH-C(16)-HSL, were identified and characterized; their roles in cell-to-cell communication has to be elucidated.     

Glass coating for PDMS microfluidic channels by sol-gel methods

Soft lithography using polydimethylsiloxane (PDMS) allows one to fabricate complex microfluidic devices easily and at low cost. However, PDMS swells in the presence of many organic solvents significantly degrading the performance of the device. We present a method to coat PDMS channels with a glass-like layer using sol-gel chemistry. This coating greatly increases chemical resistance of the channels; moreover, it can be functionalized with a wide range of chemicals to precisely control interfacial properties. This method combines the ease of fabrication afforded by soft-lithography with the precision control and chemical robustness afforded by glass.     

A TEM and XRD study of the SbNbSe3 misfit layer structures

Two new misfit layer structures have been synthesized within the Sb-Nb-Se system. Powder X-ray diffraction and electron microscopy techniques (electron diffraction, HREM, XEDS) have been used to determine the nature of their structure. According to TEM and XEDS data (for more than 15 crystals studied) both phases are monolayer type, i.e. (SbSe)1+delta (NbSe2). Electron microscopy reveals a composite modulated structure that consists of the periodical intergrowth of a pseudotetragonal SbSe layer, denominated as Q, and a pseudohexagonal layer NbSe2, denominated as H. Both layers fit along b, stack along c and do not fit along a (misfit) giving rise to an incommensurate modulation along this direction. The two phases differ in the symmetry of the Q layers being in one case orthorhombic (for delta = 0.17) and monoclinic in the other (for delta = 0.19). After the characterization of the sample by electron microscopy the unit cells of the basic layers could be refined for both phases by powder X-ray diffraction: aQ = 5.824(2) A, bQ = 5.962(5) A, cQ = 23.927(6) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees and aH = 3.415(5) A, bH = 5.962(6) A,, cH = 11.962(1) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees for the orthorhombic phase; aQ = 5.844(2) A, bQ = 5.981(1) A, cQ = 23.919(5) A, alpha = 90 degrees, beta = 90 degrees and gamma = 96.00(3)degrees and aH = 3.439(1) A, bH = 5.994(2) A, cH = 11.956(3) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees for the monoclinic phase. The phase with the monoclinic Q-sublattice often appears as twinned crystals. The more abundant crystals are disordered intergrowths of both monolayer phases.     

The regression of isothermal thermogravimetric data to evaluate degradation Ea values of polymers: A comparison with literature methods and an evaluation of lifetime prediction reliability

The thermooxidative degradation of four well known polymers, polyethylene (PE), polystyrene (PS), polycarbonate (PC) and poly(methyl methacrylate) (PMMA), was carried out in a thermogravimetric (TG) analyser, at various temperatures (in the 473–533 K range), in isothermal heating conditions. The resulting set of experimental TG data was used to determine the apparent activation energy (E_a) of degradation through two isothermal literature methods, as well as through a very simple method we set up, based on the direct regression of the experimental mass loss data, in order to verify the general applicability of our method to various polymers. The results from different methods were in good agreement. Degradation experiments in dynamic heating conditions, which were also performed, gave E_a values in good agreement with those in isothermal heating conditions for PS, PC and PMMA, while for PE a large discrepancy was observed, which was discussed and interpreted. The results suggested the general applicability of our method to all polymers, independently on their structure and degradation mechanism. A long-term (about 13 months) isothermal degradation experiment was also carried out with the same polymers at relatively low temperature (423 K). Only PE and PS evidenced appreciable mass loss in the investigated period, but the experimental data were not in agreement with those from the short-term degradations at higher temperatures, thus suggesting different degradation kinetics, and a low reliability of the lifetime predictions for polymers in service based on experiments at higher temperatures.     

One-step formation of multiple emulsions in microfluidics

We present a robust way to create multiple emulsions with controllable shell thicknesses that can vary over a wide range. We use a microfluidic device to create a coaxial jet of immiscible fluids; using a dripping instability, we break the jet into multiple emulsions. By controlling the thickness of each layer of the jet, we adjust the thicknesses of the shells of the multiple emulsions. The same method is also effective in creating monodisperse emulsions from fluids that cannot otherwise be controllably emulsified, such as, for example, viscoelastic fluids.     

Faster multiple emulsification with drop splitting

Microfluidic devices can form emulsions in which the drops have an intricate, controlled structure; however, a challenge is that the droplets are produced slowly, typically only a few millilitres per hour. Here, we present a simple technique to increase the production rate. Using a large drop maker, we produce large drops at a fast volumetric rate; by splitting these drops several times in a splitting array, we create drops of the desired small size. The advantage of this over forming the small drops directly using a small drop maker is that the drops can be formed at much faster rates. This can be applied to the production of single and multiple emulsions.     

High throughput production of single core double emulsions in a parallelized microfluidic device

Double emulsions are useful templates for microcapsules and complex particles, but no method yet exists for making double emulsions with both high uniformity and high throughput. We present a parallel numbering-up design for microfluidic double emulsion devices, which combines the excellent control of microfluidics with throughput suitable for mass production. We demonstrate the design with devices incorporating up to 15 dropmaker units in a two-dimensional or three-dimensional array, producing single-core double emulsion drops at rates over 1 kg day(-1) and with diameter variation less than 6%. This design provides a route to integrating hundreds of dropmakers or more in a single chip, facilitating industrial-scale production rates of many tons per year.     

Mass spectrometric evidence for collisionally induced removal of H2 from monoanions of 10B nido‐carborane derivatives investigated by electrospray ionization quadrupole linear ion trap and Fourier transform ion cyclotron resonance mass spectrometry

Some newly synthesized ¹⁰B nido‐carborane derivatives, i.e., 7,8‐dicarba‐nido‐undecaborane monoanions ([7‐Me‐8‐R‐C₂B₉H₁₀]^‐K⁺, R = H, butyl, hexyl, octyl and decyl), have been fully characterised and examined by electrospray ionization and Fourier transform ion cyclotron resonance mass spectrometry with liquid chromatographic separation (LC/ESI‐FTICR‐MS). These boron‐containing compounds exhibit abundant molecular ions ([M]^?) at m/z 140.22631 [CB₉H₁₄]^?, m/z 196.28883 [CB₉H₂₂]^?, m/z 224.32032 [CB₉H₂₆]^?, m/z 252.35133 [CB₉H₃₀]^? and m/z 280.38354 [CB₉H₃₄]^? at the normal tube lens voltage setting of ?90 V, which was an instrumental parameter value selected in the tuning operation. Additional [M–nH₂]^? (n = 1?4) ions were observed in the mass spectra when higher tube lens voltages were applied, i.e., ?140 V. High‐resolution FTICR‐MS data revealed the accurate masses of fragment ions, bearing either an even or an odd number of electrons. Collision‐induced dissociation of the [M–nH₂]^? ions (n = 0–4) in the quadrupole linear ion trap (LTQ) analyzer confirmed the loss of hydrogen molecules from the molecular ions. It is suggested that the loss of H₂ molecules from the alkyl chain is a consequence of the stabilization effect of the nido‐carborane charged polyhedral skeleton. Copyright © 2009 John Wiley & Sons, Ltd.     

Halide anions driven self-assembly of haloperfluoroarenes: Formation of one-dimensional non-covalent copolymers

The supramolecular organization in six solid assemblies involving iodo- and bromoperfluoroarene derivatives is described. Single crystal X-ray analyses show that the formation of the supramolecular architectures is controlled by I⁻?Br–Ar_F, I⁻?I–Ar_F, Br⁻?I–Ar_F, and Cl⁻?I–Ar_F halogen bondings thus proving the X⁻?X′–Ar_F supramolecular synthon, where X can be the same as or different from X′, is particularly robust. In five of the described architectures halide anions form two halogen bondings and form infinite chains wherein dihaloperfluoroarenes, which function as bidentate electron acceptors, and halide anions, which function as bidentate electron donors, alternate. This behaviour shows halide anions have a fair tendency to work as bidentate halogen bonding acceptors.