AN LC–MS Method for a Hexokinase Inhibitor Study Based on Adenosine 5′-Triphosphate Determination and Application to the Anticancer Mechanism of Momordica cochinchinensis

A reliable and validated LC–MS method was established for a hexokinase inhibitor study based on adenosine 5′-triphosphate (ATP) determination. By adding 5 mM ammonium acetate in the aqueous phase, this method enabled the determination of ATP by LC–MS and greatly increased the MS signal of ATP. This method was used in the study of the anticancer mechanism of Momordica cochinchinensis, an exact ingredient which had exhibited certain hexokinase inhibitor activity. This might reveal the anticancer mechanism of Momordica cochinchinensis.     

Robust cellulose-carbon nanotube conductive fibers for electrical heating and humidity sensing

Multifunctional fibers have attracted widespread attention due to applications in flexible smart wearable devices. However, simultaneously obtaining a strong and functional woven fiber is still a great challenge owing to the conflict between the properties mentioned above. Herein, mechanically strong and highly conductive cellulose/carbon nanotube (CNT) composite fibers were spun using an aqueous alkaline/urea solution. The microstructure as well as physical properties of the resulting fibers were characterized via scanning electron microscopy, infrared spectroscopy, mechanical and electrical measurement. We demonstrated that carboxylic CNTs can be well dispersed in alkali/urea aqueous systems which also dissolved cellulose well. The subsequent wet spinning process aligned the CNTs and cellulose molecules inside the regenerated composite fiber well, enhancing the interaction between these two components and endowing the composite fiber having a 20% CNT loading with an excellent mechanical strength of 185 MPa. Benefiting from the formation of conductive paths, the composite fiber with the diameter of about 50 μm possessed an electrical conductivity value in the range of 64–1274 S/m for 5–20 wt% CNT loading. This excellent mechanical strength and high electrical conductivity enable the composite fiber to exhibit a great potential in joule heating; the heating temperature of cellulose/CNT-20 fiber reached more than 55 °C within 15 s at 9 V. In addition, the multifunctional filaments are further manufactured as a water sensor to measure humidity. This work provides a potential material that can be applied in the fields of wearable electronics and smart flexible fabrics.

Graphic abstract

     

Some considerations for high‐order ‘incremental remap’‐based transport schemes: edges,reconstructions, and area integration

The problem of two‐dimensional tracer advection on the sphere is extremely important in modeling of geophysical fluids and has been tackled using a variety of approaches. A class of popular approaches for tracer advection include ‘incremental remap’ or cell‐integrated semi‐Lagrangian‐type schemes. These schemes achieve high‐order accuracy without the need for multistage integration in time, are capable of large time steps, and tend to be more efficient than other high‐order transport schemes when applied to a large number of tracers over a single velocity field. In this paper, the simplified flux‐form implementation of the Conservative Semi‐LAgrangian Multi‐tracer scheme (CSLAM) is reformulated using quadratic curves to approximate the upstream flux volumes and Gaussian quadrature for integrating the edge flux. The high‐order treatment of edge fluxes is motivated because of poor accuracy of the CSLAM scheme in the presence of strong nonlinear shear, such as one might observe in the midlatitudes near an atmospheric jet. Without the quadratic treatment of upstream edges, we observe at most second‐order accuracy under convergence of grid resolution, which is returned to third‐order accuracy under the improved treatment. A shallow‐water barotropic instability also reveals clear evidence of grid imprinting without the quadratic correction. Consequently, these tests reveal a problem that might arise in tracer transport near nonlinearly sheared regions of the real atmosphere, particularly near cubed‐sphere panel edges. Although CSLAM is used as the foundation for this analysis, the conclusions of this paper are applicable to the general class of incremental remap schemes. Copyright © 2012 John Wiley & Sons, Ltd.     

Imide‐functionalized naphthodithiophene based donor‐acceptor conjugated polymers for solar cells

Donor‐acceptor conjugated polymers containing a new imide‐functionalized naphthodithiophene (INDT) as the acceptor unit and a 2,2'‐bithiophene with varied substituents as the donor unit have been synthesized. The bandgaps of these polymers depend strongly on the dihedral angle of the 2,2'‐bithiophene unit. The 3,3'‐dialkoxy substitution (polymers PDOR / PBOR ) leads to near planar bithiophene conformation due to the well‐known S–O short contact, while the 3,3'‐dialkyl substitution (polymer PDR ) results in significant twisting due to the steric effect. Consequently PDOR / PBOR shows the lowest bandgap of 1.82/1.85 eV while PDR has a bandgap of 2.38 eV. Bulk‐heterojunction solar cells of the polymer/fullerene blends have been fabricated. Preliminary results show that PBOR gives the best device performance with power conversion efficiencies as high as 2.45% in air without any thermal annealing treatment, indicating the promising potential of INDT‐containing conjugated polymers for efficient solar cells. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3818–3828     

Porous Media Compressed-Air Energy Storage (PM-CAES): Theory and Simulation of the Coupled Wellbore–Reservoir System

Expansion in the supply of intermittent renewable energy sources on the electricity grid can potentially benefit from implementation of large-scale compressed air energy storage in porous media systems (PM-CAES) such as aquifers and depleted hydrocarbon reservoirs. Despite a large government research program 30 years ago that included a test of air injection and production in an aquifer, and an abundance of literature on CAES mostly relevant to caverns, there remain fundamental questions about the hydrologic and energetic performance of PM-CAES. We have developed rigorous simulation capabilities for PM-CAES that include modeling the coupled wellbore–reservoir system. Through consideration of a prototypical PM-CAES wellbore–reservoir system representing a depleted hydrocarbon reservoir, we have simulated 100 daily cycles of PM-CAES. We find that (1) PM-CAES can store energy but that pervasive pressure gradients in PM-CAES result in spatially variable energy storage density in the reservoir, (2) the wellbore–reservoir storage component of PM-CAES is very efficient, (3) cap-rock and hydrologic seals along with proper sizing of the PM-CAES reservoir prevent excess pressure diffusion from being a problem, and (4) injection and production of air does not significantly mobilize residual liquid water in the reservoir.     

Simultaneous determination of phthalates and adipates in human serum using gas chromatography–mass spectrometry with solid‐phase extraction

A gas chromatography–mass spectrometry assay was developed and validated for the simultaneous determination of phthalates and adipates in human serum. The phthalates and adipates studied were dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzylbutyl phthalate, di‐2‐ethylhexyl phthalate, di‐n‐octyl phthalate, diethyl adipate, dibutyl adipate, diisobutyl adipate, bis(2‐butoxyethyl) adipate and di‐2‐ethylhexyl adipate, with diisooctyl phthalate as internal standard. The extraction and cleaning up procedure was carried out with solid‐phase extraction cartridges containing dimethyl butylamine groups, which showed extraction efficiencies over 88% for each analyte and the internal standard. The calibration curves obtained were linear with correlation coefficients greater than 0.98. For all analytes, the assay gave CV% values for intra‐day precision from 4.9 to 13.3% and mean accuracy values from 91.4 to 108.4%, while inter‐day precision was 5.2–13.4% and mean accuracy 91.0–110.2%. The limits of detection for the assay of phthalates and adipates were in the range 0.7–4.5 ng/mL. The method is simple, sensitive and accurate, and allows for simultaneous determination of nanogram levels of phthalates and adipates in human serum. It was successfully applied to an investigation on the level of phthalates and adipates in a non‐occupationally exposed population.     

The combination of TsNBr2/TsNH2 as the nitrogen/halo source for the aminobromination of β-methyl-β-nitrostyrenes catalyzed by Mn(OAc)2

The combination of N,N-dibromo-p-tolunesulfonamide (4-TsNBr₂) and TsNH₂ was found to be an efficient halogen/nitrogen source for the aminohalogenation of β-methyl-β-nitrostyrenes with manganese (II) acetate as the catalyst in the presence of 4 Å molecular sieves. The reaction results in vicinal bromoamino nitroalkanes with the opposite regioselectivity comparing with those reported, which was also confirmed by X-ray structural analysis.     

Facile,efficient functionalization of polyethylene via regioselective copolymerization of ethylene with cyclic dienes

The copolymerizations of ethylene with cyclic dienes [dicyclopentadiene (DCPD) and 2,5‐norbornadiene (NBD)] using bis(β‐enaminoketonato)titanium complexes [PhN = C(R₂)CHC(R₁)O]₂TiCl₂ ( 1a : R₁ = CF₃, R₂ = CH₃; 1b : R₁ = t‐Bu, R₂ = CF₃; 1c : R₁ = Ph, R₂ = CF₃) have been investigated. In the presence of modified methylaluminoxane, these complexes exhibited high catalytic activities in the copolymerization of ethylene with DCPD or NBD, affording high molecular weight copolymers with unimodal molecular weight distributions. ¹H and ¹³C‐NMR spectra reveal ethylene/DCPD copolymerizations by catalysts 1a – c proceeds through the enchainment of norbornene ring. Catalysts 1a and 1c showed a tendency to afford alternating copolymers. More noticeably, catalysts 1b and 1c bearing bulky substituents on the ligands promote ethylene/NBD copolymerization without crosslinking, affording the copolymer containing intracyclic double bonds. The NBD incorporation as high as 27.2 mol % has been achieved by catalyst 1c . Moreover, the microstructures of the copolymers were further confirmed by the measurement of reactivity ratios and dyad monomer sequences as well as mean sequence lengths. The intracyclic double bonds of ethylene/DCPD or ethylene/NBD copolymers can be fully converted into polar groups such as epoxy, amine, silane, and hydroxyl groups under mild conditions. Convenient synthesis of hydroxylated polyethylene can be provided for the first time through the ring opening reaction of epoxide. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1764–1772, 2010