A Plausible Simultaneous Synthesis of Amino Acids and Simple Peptides on the Primordial Earth

Following his seminal work in 1953, Stanley Miller conducted an experiment in 1958 to study the polymerization of amino acids under simulated early Earth conditions. In the experiment, Miller sparked a gas mixture of CH₄, NH₃, and H₂O, while intermittently adding the plausible prebiotic condensing reagent cyanamide. For unknown reasons, an analysis of the samples was not reported. We analyzed the archived samples for amino acids, dipeptides, and diketopiperazines by liquid chromatography, ion mobility spectrometry, and mass spectrometry. A dozen amino acids, 10 glycine‐containing dipeptides, and 3 glycine‐containing diketopiperazines were detected. Miller’s experiment was repeated and similar polymerization products were observed. Aqueous heating experiments indicate that Strecker synthesis intermediates play a key role in facilitating polymerization. These results highlight the potential importance of condensing reagents in generating diversity within the prebiotic chemical inventory.     

An LX-10 kinetic model calibrated using simulations of multiple small-scale thermal safety tests

A new chemical kinetic model for the beta-delta transition and decomposition of LX-10 (95% octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine, 5% Viton A binder) is presented here. This model implements aspects of previous kinetic models but calibrates the model parameters to data sets of three experiments: differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and one-dimensional time to explosion (ODTX). The calibration procedure contains three stages: one stage uses open-pan DSC and TGA to develop a base reaction for formation of heavy gases, a second stage features closed-pan DSC to ascertain the autocatalytic behavior of reactant gases attacking the solid explosive, and a final stage adjusts the rate for the breakdown of heavy reactant gases using ODTX experimental data. The resultant model presents a large improvement in the agreement between simulated DSC and TGA results and their respective experiments while maintaining the same level of agreement with ODTX, scaled thermal explosion, and laser heating explosion times when compared to previous models.     

Yb(OTf)3-catalyzed reactions of 5-alkylidene Meldrum's acids with phenols: one-pot assembly of 3,4-dihydrocoumarins, 4-chromanones, coumarins, and chromones

[reaction: see text] The Yb(OTf)3-catalyzed annulation reactions of phenols with 5-alkylidene Meldrum's acids enabled the synthesis of structurally diverse heterocycles in high isolated yields. A series of 4-substituted 3,4-dihydrocoumarins, 2,2-disubstituted 4-chromanones, coumarins, and 2-substituted chromones were readily and efficiently assembled, including the naturally occurring coumarins citropten, scoparone, and ayapin. Addition of phenols to biselectrophilic 5-alkylidene Meldrum's acids proceeded through two distinct multibond-forming modes: Friedel-Crafts C-alkylation/O-acylation and Friedel-Crafts C-acylation/O-alkylation. The regioselectivity of the catalytic annulation reaction was controlled by the degree of substitution on the alkylidene moiety.     

Differential receptor arrays and assays for solution-based molecular recognition

Nature has inspired an emergent supramolecular field of synthetic receptor arrays and assays for the pattern-based recognition of various bioanalytes and metal species. The synthetic receptors are not necessarily selective for a particular analyte, but the combined signal response from the array is diagnostic for the analyte. This tutorial review describes recent work in the literature for this emerging supramolecular field and details basic array and assay design principles. We review the analytes targeted, signaling types used, and pattern recognition.Developing specific receptors for the solution-based analysis of complex analytes and mixtures is a daunting task. A solution to this difficult task has been inspired by nature's use of arrays of receptors in the senses of taste and smell. An emerging field within supramolecular chemistry is the use of synthetic and readily available receptors in array formats for the detection of analytes in solution. Each receptor in a differential array does not necessarily have selectivity for a particular analyte, but the combined fingerprint response can be extracted as a diagnostic pattern visually, or using chemometric tools. This new genre of molecular recognition is advancing rapidly with several groups developing novel array platforms and receptors.     

Lattice Distortion and H-passivation in Pure Carbon Electrocatalysts for Efficient and Stable Two-electron Oxygen Reduction to H2O2

The exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e⁻ ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well-discussed structures, this work presents a strategy to promote efficient and stable 2e⁻ ORR of carbon materials through the synergistic effect of lattice distortion and H-passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H₂O₂ production. The work here gives not only new understandings on the 2e⁻ ORR catalysis, but also the robust catalyst which can be directly used in industry.     

Palladium-catalyzed asymmetric allylic alkylation of meso- and dl-1,2-divinylethylene carbonate

The palladium-catalyzed asymmetric allylic alkylation of a 1:1 mixture of dl- and meso-1,2-divinylethylene carbonate is reported. For the first time, both the ionization and nucleophilic addition steps of the catalytic cycle act as enantiodiscriminating steps to give a single product in high enantiomeric excess. The reactions proceed in >98% ee to efficiently generate useful chiral building blocks from acrolein. The absolute and relative configurations of iso-cladospolide B and 11-epi-iso-cladospolide B were verified by total synthesis, solving an apparent discrepancy in the literature.     

Unprecedented alkene complex of zinc(II): structures and bonding of divinylzinc complexes

This report describes the solid-state structures of a series of divinylzinc complexes, one of which represents the only structurally characterized zinc(II) pi-complex. Vinylzinc reagents, Zn[C(Me)=CH2]2 (1) and Zn[C(H)=CMe2]2 (2), have been synthesized and isolated as white crystalline solids in 66 and 72% yield, respectively. Each compound exhibits an infinite polymeric architecture in the solid state via a series of zinc-pi (1) and zinc-sigma-bonded (2) bridging interactions. Addition of chelating ligands to these divinylzinc compounds allowed isolation of the monomeric adducts (bipy)Zn[C(Me)=CH2]2 (1.bipy), (tmeda)Zn[C(Me)=CH2]2 (1*tmeda), (bipy)Zn[C(H)=CMe2]2 (2*bipy), and (tmeda)Zn[C(H)=CMe2]2 (2*tmeda), of which 1*bipy, 2*bipy, and 2*tmeda have been characterized crystallographically.     

Diruthenium dithiolato cyanides: basic reactivity studies and a post hoc examination of nature's choice of Fe versus Ru for hydrogenogenesis

The reaction of Ru2(S2C3H6)(CO)6 (1) with 2 equiv of Et4NCN yielded (Et4N)2[Ru2(S2C3H6)(CN)2(CO)4], (Et4N)2[3], which was shown crystallographically to consist of a face-sharing bioctahedron with the cyanide ligands in the axial positions, trans to the Ru-Ru bond. Competition experiments showed that 1 underwent cyanation >100x more rapidly than the analogous Fe2(S2C3H6)(CO)6. Furthermore, Ru2(S2C3H6)(CO)6 underwent dicyanation faster than [Ru2(S2C3H6)(CN)(CO)5]-, implicating a highly electrophilic intermediate [Ru2(S2C3H6)(mu-CO)(CN)(CO)5]-. Ru2(S2C3H6)(CO)6 (1) is noticeably more basic than the diiron compound, as demonstrated by the generation of [Ru2(S2C3H6)(mu-H)(CO)6]+, [1H]+. In contrast to 1, the complex [1H]+ is unstable in MeCN solution and converts to [Ru2(S2C3H6)(mu-H)(CO)5(MeCN)]+. (Et4N)2[3] was shown to protonate with HOAc (pKa = 22.3, MeCN) and, slowly, with MeOH and H2O. Dicyanide [3]2- is stable toward excess acid, unlike the diiron complex; it slowly forms the coordination polymer [Ru2(S2C3H6)(mu-H)(CN)(CNH)(CO)4]n, which can be deprotonated with Et3N to regenerate [H3]-. Electrochemical experiments demonstrate that [3H]- catalyzes proton reduction at -1.8 V vs Ag/AgCl. In contrast to [3]2-, the CO ligands in [3H]- undergo displacement. For example, PMe3 and [3H]- react to produce [Ru2(S2C3H6)(mu-H)(CN)2(CO)3(PMe3)]-. Oxidation of (Et4N)2[3] with 1 equiv of Cp2Fe+ gave a mixture of [Ru2(S2C3H6)(mu-CO)(CN)3(CO)3]- and [Ru2(S2C3H6)(CN)(CO)5]-, via a proposed [Ru2]2(mu-CN) intermediate. Overall, the ruthenium analogues of the diiron dithiolates exhibit reactivity highly reminiscent of the diiron species, but the products are more robust and the catalytic properties appear to be less promising.     

Phase behavior and viscoelastic properties of entangled block copolymer gels

Triblock copolymers in midblock‐selective solvents can form physical gels. However, at low triblock contents (near the percolation threshold), the bridging of chains between micelles can lead to macrophase separation. Adding a styrene–isoprene diblock to a styrene–isoprene–styrene triblock copolymer in squalane can eliminate macrophase separation, yielding a wide range of stable, single‐phase gels with a disordered arrangement of micelles. The plateau modulus of these triblock gels scales with the 2.2 power of polymer content, indicating the importance of entanglements in dictating the modulus. Comparing gels made from the midblock‐saturated derivative of the same polymer [styrene‐(ethylene‐alt‐propylene)‐styrene] in squalane reveals that the modulus differences in the gels are a direct consequence of the difference in the entanglement molecular weight of the midblock homopolymer in bulk. Finally, the broad relaxation spectrum of these triblocks is well‐described by a recent theory for the dynamics of entangled star polymers, with the breadth of the relaxation spectrum dictated by the number of entanglements per midblock in the gel. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2183–2197, 2001     

Ring current effects in crystals. Evidence from 13C chemical shift tensors for intermolecular shielding in 4,7-di-t-butylacenaphthene versus 4,7-di-t-butylacenaphthylene

13C chemical shift tensor data from 2D FIREMAT spectra are reported for 4,7-di-t-butylacenaphthene and 4,7-di-t-butylacenaphthylene. In addition, calculations of the chemical shielding tensors were completed at the B3LYP/6-311G** level of theory. While the experimental tensor data on 4,7-di-t-butylacenaphthylene are in agreement with theory and with previous data on polycyclic aromatic hydrocarbons, the experimental and theoretical data on 4,7-di-t-butylacenaphthene lack agreement. Instead, larger than usual differences are observed between the experimental chemical shift components and the chemical shielding tensor components calculated on a single molecule of 4,7-di-t-butylacenaphthene, with a root mean square (rms) error of +/-7.0 ppm. The greatest deviation is concentrated in the component perpendicular to the aromatic plane, with the largest value being a 23 ppm difference between experiment and theory for the 13CH2 carbon delta11 component. These differences are attributed to an intermolecular chemical shift that arises from the graphitelike, stacked arrangement of molecules found in the crystal structure of 4,7-di-t-butylacenaphthene. This conclusion is supported by a calculation on a trimer of molecules, which improves the agreement between experiment and theory for this component by 14 ppm and reduces the overall rms error between experiment and theory to 4.0 ppm. This intermolecular effect may be modeled with the use of nuclei independent chemical shieldings (NICS) calculations and is also observed in the isotropic 1H chemical shift of the CH2 protons as a 4.2 ppm difference between the solution value and the solid-state chemical shift measured via a 13C-1H heteronuclear correlation experiment.