A comparative study of heavy-atom effects on the room-temperature phosphorescence of biologically important purines

Room-temperature phosphorescence (r.t.p.) of nine biologically important purines on filter paper is studied. The heavy-atom effect leads to a significant enhancement of r.t.p. signals, with the trend being Tl⁺ > Pb²⁺ ? I — ? Sm³⁺ for most purines. Absolute limits of detection range from 40 pg (purine) to 19 ng (theophylline).     

Synthesis and formulation of vinyl-containing polyacids for improved light-cured glass-ionomer cements

Vinyl-containing poly(acrylic acid-co-itaconic acid) copolymers were synthesized and used to formulate light-curable cements containing reactive glass fillers (Fuji II LC). The conditions for light curing were studied and optimized. Effects of molecular weight (MW), grafting ratio, comonomer, liquid composition, powder/liquid (P/L) ratio, glass powder and aging were evaluated. The results show that the vinyl-containing glass-ionomer cements (GICs) prepared in this study exhibit higher compressive strength (CS, 225.6 MPa), diametral tensile strength (DTS, 28.4 MPa) and much higher flexural strength (FS, 116.4 MPa), as compared to commercial Fuji II LC GIC (186.6 in CS, 19.1 in DTS and 57.1 in FS). The optimal light-exposure time was found to be around 10 min, and concentrations of CQ and DC were 0.5% (by weight) and 1.0%, respectively. Effects of MW, grafting ratio, P/L ratio and content of polymer in the liquid formulation were significant. The highest strengths were found for the optimal formulations where the MW was 15,000 (weight average), grafting ratio 25 mol%, P/L ratio 2.7 and liquid composition 50:20:30. During aging, the cement showed an increase of strength over the first week and then no change for a month. SEM analysis suggests that more integrated microstructures and smaller glass particles can lead to higher FS and higher polymer content in GICs leads to tough fracture surface and plastic deformation.     

An Investigation of Inclusion Complexes of Cyclodextrins with Phenylurea Herbicides by Photochemically-Induced Fluorescence. Analytical Applications

The effect of -cyclodextrin (-CD) and hydroxypropyl--cyclodextrin (HP--CD) upon the photochemically-induced fluorescence (PIF) properties of four phenylurea herbicides, including linuron, diuron, isoproturon and neburon has been studied. Photochemical conversion of these nonfluorescent herbicides into strongly fluorescent photoproducts was shown to occur in -CD and HP--CD aqueous media. The influence of pH, UV irradiation time and photoproduct stability on the fluorescence intensity was also investigated. In addition, the stoichiometry and formation constants of the complexes formed between herbicides and -cyclodextrin (-CD) or 2-hydroxypropyl--cyclodextrin (HP--CD) were determined. The formation constant values, ranging from 184 ± 40 to 1498 ± 245 M^-1, were calculated by applying the iterative nonlinear regression (NLR) approach to the PIF data. Linear calibrations graphs were established in the interval 1–12 g/mL, for diuron, linuron and neburon. The IUPAC limits of detection ranged between 580 and 700 ng/mL, according to the compound. Application to the analysis of phenylurea herbicides in spiked river water was also described.     

Block copolymers of isotactic polypropylene and 1,4-polybutadiene

Two block copolymers of isotactic polypropylene and 1,4 polybutadiene were synthesized using techniques involving a transformation from anionic to Ziegler–Natta polymerization mechanisms. The yield of block copolymer was about fifteen percent (weight basis) in both polymerizations, the remainder being unreacted polybutadiene from the first block synthesis. Molecular characterization experiments and model reactions were consistent with a block-like structure for the copolymers; definitive evidence for the proposed molecular structure was obtained through transmission electron microscopy which clearly revealed microphase-separated morphologies characteristic of block copolymers.     

New beginnings for matrix metalloproteinase inhibitors: identification of high-affinity zinc-binding groups

In an effort to identify promising non-hydroxamate inhibitors of matrix metalloproteinases (MMPs), several new zinc-binding groups (ZBGs) based on pyrone, pyrothione, hydroxypyridinone, and hydroxypyridinethione chelators have been examined. Structural studies with tris(pyrazolyl)borate model complexes show that these ligands bind to the MMP active site zinc(II) ion in a bidentate fashion, similar to that found with hydroxamate-based inhibitors. Fluorescence- and colorimetric-based enzyme assays have been used to determine the IC50 values for these ZBGs against MMP-3; mixed O,S-donor ligands were found to be remarkably potent, with IC50 values as much as 700-fold lower than that found for acetohydroxamic acid. Inhibitory activity was found to parallel metal binding affinity as determined in titrations with model complexes. These results demonstrate that MPIs based on new ZBGs are feasible and may indeed improve the overall performance of inhibitors designed against these important medicinal targets.     

Quantification of several atmospheric gases from high resolution infrared solar spectra obtained at the south pole in 1980 and 1986

Simultaneous total column amounts of a number of minor and trace atmospheric gases above the South Pole in December 1980 and December 1986 have been deduced from analysis of high resolution solar absorption spectra recorded (by F. J. M. and F. H. M.) from Amundsen-Scott South Pole Station. These spectra also contain some limited information on the vertical profiles of the observed atmospheric gases.The data sets were recorded with a Bomem Michelson-type interferometer and analyzed with a spectral least-squares fitting procedure, utilizing the best available spectroscopic line parameters and absorption cross sections. Because the same instrument, line parameters, and analysis method have been used in analyzing the December 1980 and December 1986 data sets, the precision in comparing the column amounts from these two dates is rather high, about 10–20% for the stronger absorbing gases. For this reason, it has been possible to quantify or determine upper limits for differences between the December 1980 and December 1986 total column amounts, of a number of atmospheric gases including O₃, N₂O, HNO₃, CO₂, CH₄, and CF₂C_{1 2} (CFC 12). In addition, vertical column amounts for a number of atmospheric gases covered only in the December 1986 observations have been derived, including HC1, NO, NO₂, and C₂H₆. Some of these results will be discussed here. The HC1 measurements are especially interesting since the observed amounts are higher than expected from observations made at lower latitudes in the northern and southern hemispheres.     

Solution-processed anodes from layer-structure materials for high-efficiency polymer light-emitting diodes

The development of low-cost, large-area electronic applications requires the deposition of active materials in simple and inexpensive techniques at room temperature, properties usually associated with polymer films. In this study, we demonstrate the integration of solution-processed inorganic films in light-emitting diodes. The layered transition metal dichalcogenide (LTMDC) films are deposited through Li intercalation and exfoliation in aqueous solution and partially oxidized in an oxygen plasma generator. The chemical composition and thickness of the LTMDC and corresponding transition metal oxide (TMO) films are investigated by X-ray photoelectron spectroscopy. The morphology and topography of the films are studied by atomic force microscopy. X-ray powder diffraction is used to determine the orientation of the LTMDC film. Finally, the LTMDC and their corresponding oxides are utilized as hole-injecting and electron-blocking materials in polymer light-emitting diodes with the general structure ITO/LTMDC/TMO/polyfluorene/Ca/Al. Efficient hole injection and electron blocking by the inorganic layers result in outstanding device performance and high efficiency.     

Photochemically-induced fluorescence determination of sulfonylurea herbicides using micellar media

An analytical method based on the use of UV irradiation to produce fluorescent derivatives from four non-fluorescent sulfonylurea herbicides, including chlorsulfuron, metsulfuron methyl, 3-rimsulfuron and sulfometuron methyl is described. Their photochemically-induced fluorescence (PIF) properties in several solvents (water, dimethyl sulfoxide (DMSO), dimethyl formamide (DMF), acetonitrile, methanol, ethanol, propan-2-ol and their binary mixtures with water) and micellar solutions of sodium dodecyl sulfate (SDS), and cetyltrimethylammonium chloride (CTAC) are reported. Physicochemical variable influencing the sensitivity of the method have been optimized. A PIF method is developed for the determination of the four herbicides under study. Micellar media are found to provide the best analytical figures of merits. Linear dynamic ranges are established over about two orders of magnitude. The limit of detection (LOD) range from 0.2 to 6 ng ml(-1) according to the compound, with relative standard deviation (RSD) between 1.2 and 3.9%. Examples of applications to the analysis of these herbicides in spiked river water samples are given. The mean recoveries range from 80 to 104%.