Palladium-catalyzed asymmetric allylic alkylation of meso- and dl-1,2-divinylethylene carbonate

The palladium-catalyzed asymmetric allylic alkylation of a 1:1 mixture of dl- and meso-1,2-divinylethylene carbonate is reported. For the first time, both the ionization and nucleophilic addition steps of the catalytic cycle act as enantiodiscriminating steps to give a single product in high enantiomeric excess. The reactions proceed in >98% ee to efficiently generate useful chiral building blocks from acrolein. The absolute and relative configurations of iso-cladospolide B and 11-epi-iso-cladospolide B were verified by total synthesis, solving an apparent discrepancy in the literature.     

Unprecedented alkene complex of zinc(II): structures and bonding of divinylzinc complexes

This report describes the solid-state structures of a series of divinylzinc complexes, one of which represents the only structurally characterized zinc(II) pi-complex. Vinylzinc reagents, Zn[C(Me)=CH2]2 (1) and Zn[C(H)=CMe2]2 (2), have been synthesized and isolated as white crystalline solids in 66 and 72% yield, respectively. Each compound exhibits an infinite polymeric architecture in the solid state via a series of zinc-pi (1) and zinc-sigma-bonded (2) bridging interactions. Addition of chelating ligands to these divinylzinc compounds allowed isolation of the monomeric adducts (bipy)Zn[C(Me)=CH2]2 (1.bipy), (tmeda)Zn[C(Me)=CH2]2 (1*tmeda), (bipy)Zn[C(H)=CMe2]2 (2*bipy), and (tmeda)Zn[C(H)=CMe2]2 (2*tmeda), of which 1*bipy, 2*bipy, and 2*tmeda have been characterized crystallographically.     

Diruthenium dithiolato cyanides: basic reactivity studies and a post hoc examination of nature's choice of Fe versus Ru for hydrogenogenesis

The reaction of Ru2(S2C3H6)(CO)6 (1) with 2 equiv of Et4NCN yielded (Et4N)2[Ru2(S2C3H6)(CN)2(CO)4], (Et4N)2[3], which was shown crystallographically to consist of a face-sharing bioctahedron with the cyanide ligands in the axial positions, trans to the Ru-Ru bond. Competition experiments showed that 1 underwent cyanation >100x more rapidly than the analogous Fe2(S2C3H6)(CO)6. Furthermore, Ru2(S2C3H6)(CO)6 underwent dicyanation faster than [Ru2(S2C3H6)(CN)(CO)5]-, implicating a highly electrophilic intermediate [Ru2(S2C3H6)(mu-CO)(CN)(CO)5]-. Ru2(S2C3H6)(CO)6 (1) is noticeably more basic than the diiron compound, as demonstrated by the generation of [Ru2(S2C3H6)(mu-H)(CO)6]+, [1H]+. In contrast to 1, the complex [1H]+ is unstable in MeCN solution and converts to [Ru2(S2C3H6)(mu-H)(CO)5(MeCN)]+. (Et4N)2[3] was shown to protonate with HOAc (pKa = 22.3, MeCN) and, slowly, with MeOH and H2O. Dicyanide [3]2- is stable toward excess acid, unlike the diiron complex; it slowly forms the coordination polymer [Ru2(S2C3H6)(mu-H)(CN)(CNH)(CO)4]n, which can be deprotonated with Et3N to regenerate [H3]-. Electrochemical experiments demonstrate that [3H]- catalyzes proton reduction at -1.8 V vs Ag/AgCl. In contrast to [3]2-, the CO ligands in [3H]- undergo displacement. For example, PMe3 and [3H]- react to produce [Ru2(S2C3H6)(mu-H)(CN)2(CO)3(PMe3)]-. Oxidation of (Et4N)2[3] with 1 equiv of Cp2Fe+ gave a mixture of [Ru2(S2C3H6)(mu-CO)(CN)3(CO)3]- and [Ru2(S2C3H6)(CN)(CO)5]-, via a proposed [Ru2]2(mu-CN) intermediate. Overall, the ruthenium analogues of the diiron dithiolates exhibit reactivity highly reminiscent of the diiron species, but the products are more robust and the catalytic properties appear to be less promising.     

Ring current effects in crystals. Evidence from 13C chemical shift tensors for intermolecular shielding in 4,7-di-t-butylacenaphthene versus 4,7-di-t-butylacenaphthylene

13C chemical shift tensor data from 2D FIREMAT spectra are reported for 4,7-di-t-butylacenaphthene and 4,7-di-t-butylacenaphthylene. In addition, calculations of the chemical shielding tensors were completed at the B3LYP/6-311G** level of theory. While the experimental tensor data on 4,7-di-t-butylacenaphthylene are in agreement with theory and with previous data on polycyclic aromatic hydrocarbons, the experimental and theoretical data on 4,7-di-t-butylacenaphthene lack agreement. Instead, larger than usual differences are observed between the experimental chemical shift components and the chemical shielding tensor components calculated on a single molecule of 4,7-di-t-butylacenaphthene, with a root mean square (rms) error of +/-7.0 ppm. The greatest deviation is concentrated in the component perpendicular to the aromatic plane, with the largest value being a 23 ppm difference between experiment and theory for the 13CH2 carbon delta11 component. These differences are attributed to an intermolecular chemical shift that arises from the graphitelike, stacked arrangement of molecules found in the crystal structure of 4,7-di-t-butylacenaphthene. This conclusion is supported by a calculation on a trimer of molecules, which improves the agreement between experiment and theory for this component by 14 ppm and reduces the overall rms error between experiment and theory to 4.0 ppm. This intermolecular effect may be modeled with the use of nuclei independent chemical shieldings (NICS) calculations and is also observed in the isotropic 1H chemical shift of the CH2 protons as a 4.2 ppm difference between the solution value and the solid-state chemical shift measured via a 13C-1H heteronuclear correlation experiment.     

Sterically bulky tris(triazolyl)borate ligands as water-soluble analogues of tris(pyrazolyl)borate

The recently synthesized 3-tert-butyl-5-methyl-1,2,4-triazole reacted with KBH4 to give the new potassium tris(3-tert-butyl-5-methyl-1,2,4-triazolyl)borate K(Ttz(tBu,Me)) ligand. Ttz(tBu,Me) formed a four-coordinate (Ttz(tBu,Me))CoCl complex and five-coordinate (Ttz(tBu,Me))CoNO3 and (Ttz(tBu,Me))ZnOAc complexes. When these complexes were compared to their Tp(tBu,Me) analogues, it was found that Ttz(tBu,Me) resulted in negligible steric differences. K(Ttz(tBu,Me)) is more water-soluble than K(Tp(tBu,Me)), so bulky tris(triazolyl)borate ligands should lead to functional models for enzyme active sites in an aqueous environment and the creation of water-soluble analogues of Tp catalysts.     

Singlet and triplet potential surfaces for the O2+C2H4 reaction

Electronic structure calculations at the CASSCF and UB3LYP levels of theory with the aug-cc-pVDZ basis set were used to characterize structures, vibrational frequencies, and energies for stationary points on the ground state triplet and singlet O(2)+C(2)H(4) potential energy surfaces (PESs). Spin-orbit couplings between the PESs were calculated using state averaged CASSCF wave functions. More accurate energies were obtained for the CASSCF structures with the MRMP2/aug-cc-pVDZ method. An important and necessary aspect of the calculations was the need to use different CASSCF active spaces for the different reaction paths on the investigated PESs. The CASSCF calculations focused on O(2)+C(2)H(4) addition to form the C(2)H(4)O(2) biradical on the triplet and singlet surfaces, and isomerization reaction paths ensuing from this biradical. The triplet and singlet C(2)H(4)O(2) biradicals are very similar in structure, primarily differing in their C-C-O-O dihedral angles. The MRMP2 values for the O(2)+C(2)H(4)→C(2)H(4)O(2) barrier to form the biradical are 33.8 and 6.1 kcal/mol, respectively, for the triplet and singlet surfaces. On the singlet surface, C(2)H(4)O(2) isomerizes to dioxetane and ethane-peroxide with MRMP2 barriers of 7.8 and 21.3 kcal/mol. A more exhaustive search of reaction paths was made for the singlet surface using the UB3LYP/aug-cc-pVDZ theory. The triplet and singlet surfaces cross between the structures for the O(2)+C(2)H(4) addition transition states and the biradical intermediates. Trapping in the triplet biradical intermediate, following (3)O(2)+C(2)H(4) addition, is expected to enhance triplet→singlet intersystem crossing.     

Electrochemical polarisation and galvanic couple behaviour of the primary phase of 55% Al–Zn coating investigated using band microelectrodes (BME) and band microelectrode arrays

Electrochemical polarisation experiments have shown that anodic dissolution processes on Al–40% Zn alloys are significantly enhanced in chloride compared to sulfate-based electrolytes. The aluminium content of the alloys allowed passive behaviour to be observed in sulfate electrolyte even in the presence of zinc-rich precipitates on the surface. Electrolyte pH affected cathodic processes, which was attributed to the rate of proton reduction and the passivity of the surface. Monitoring the OCP of the alloy band during polarisation of neighbouring zinc electrodes in band microelectrode (BME) arrays showed that generation of alkaline pH at the zinc electrodes affected the OCP of the alloy when the inter-electrode spacing was 10, 50, and 200 μm. Where elements of a BME array were close enough to interact via mass transport, the overall galvanic behaviour of the cell was found to be anodic or cathodic, whereas the alloy was consistently cathodic with respect to zinc in galvanic cells at larger separations. Dedicated to the 80th birthday of Keith B. Oldham.     

Precisely Controlled Delivery of Abaloparatide through Injectable Hydrogel to Promote Bone Regeneration

Side‐effects from allograft, limited bone stock, and site morbidity from autograft are the major challenges to traditional bone defect treatments. With the advance of tissue engineering, hydrogel injection therapy is introduced as an alternative treatment. Therapeutic drugs and growth factors can be carried by hydrogels and delivered to patients. Abaloparatide, as an analog of human recombinant parathyroid hormone protein (PTHrp) and an alternative to teriparatide, has been considered as a drug for treating postmenopausal osteoporosis since 2017. Since only limited cases of receiving abaloparatide with polymeric scaffolds have been reported, the effects of abaloparatide on pre‐osteoblast MC3T3‐E1 are investigated in this study. It is found that in vitro abaloparatide treatment can promote pre‐osteoblast MC3T3‐E1 cells’ viability, differentiation, and mineralization significantly. For the drug delivery system, 3D porous structure of the methacrylated gelatin (GelMA) hydrogel is found effective for prolonging the release of abaloparatide (more than 10 days). Therefore, injectable photo‐crosslinked GelMA hydrogel is used in this study to prolong the release of abaloparatide and to promote healing of defected bones in rats. Overall, data collected in this study show no contradiction and imply that Abaloparatide‐loaded GelMA hydrogel is effective in stimulating bone regeneration.     

Reactivity of N-nitrosoamides in confined spaces

The thermal rearrangement of several N-nitrosoamides was studied by ¹H NMR in the context of reversible encapsulation. The N-nitrosoamide guests were isolated from the bulk solvent in a hydrogen-bonded dimeric host capsule which prevented their rearrangement. The guests appear to be preserved in their ground state conformations by the pressure exerted by the host. The conformations of the free and bound N-nitrosoamides are of comparable relative energies as determined by DFT calculations.