Novel Electrochemical Microsensor for Hydrogen Peroxide based on Iron‐Ruthenium Hexacyanoferrate Modified Carbon Fiber Electrode

Novel electrochemical microsensor based on mixed iron‐ruthenium hexacyanoferrate (FeRuHCF) modified carbon fiber microelectrode (CFME) is presented for voltammetric and amperometric measurement of hydrogen peroxide at physiological pH. The FeRuHCF coating was electrochemically deposited using a one step procedure onto the substrate carbon fiber microelectrode by cycling the potential between 0.0 and +1.0 V (vs. Ag/AgCl) in a solution containing all precursor salts. The microsensor displayed good stability in neutral and alkaline media and had a nonstop working lifetime of up to 12 hours. The amperometric response time varied from 5 to 15 s depending on the hydrogen peroxide concentration level. The newly developed electrochemical microsensor exhibited a highly linear behavior in the examined concentration range from 5 to 1000 μmol L^?1 (R²=0.999), an LoD (3σ) of 0.9 μmol L^?1, and a favorable reproducibility with a calculated RSD of 2.9% (n= 6) for 100 μmol L^?1 hydrogen peroxide, thus holding great promise for its further application in real samples and its exploitation in combination with biorecognition elements in advanced microbiosensor design.     

Is there a homolytic substitution chemistry (SH2) of sulfones?

[reaction: see text] A series of 2-alkylsulfonyl-2'-biphenyl radicals, in which the alkyl group is primary, secondary, or tertiary, were generated and the products of their reactions investigated. Dibenzothiophene S,S-dioxide was not identified among the products, which arose mainly from intramolecular hydrogen abstraction from the alkyl group or addition to the solvent, benzene. On this basis, it is concluded that homolytic substitution at sulfonyl sulfur, if possible at all, is too slow to take precedence over a number of competing decomposition pathways. Previous literature results suggesting the possibility of intramolecular homolytic substitution at sulfonyl sulfur may be explained by alternative processes.     

A review of intercombination lines in beryllium-like ions

Theoretical and experimental results for the 2s^{2 1}S₀-2s2p³P₁ intercombination line in beryllium-like ions are reviewed and revised, and some new data are presented. The uncertainty in the resulting transition rate is estimated, by using convergence of systematic calculations, accuracy of energy properties and theoretical tests, and is used to evaluate the accuracy of present and other calculations, and arrive at a recommended theoretical value, with uncertainty estimates.     

Ring Expansion of Thiolactams via Imide Intermediates: An Amino Acid Insertion Strategy

The Ag^I-promoted reaction of thiolactams with N-Boc amino acids yields an N-(α-aminoacyl) lactam that can rearrange through an acyl transfer process. Boc-deprotection results in convergence to the ring-expanded adduct, thereby facilitating an overall insertion of an amino acid into the thioamide bond to generate medium-sized heterocycles. Application to the site-specific insertion of amino acids into cyclic peptides is demonstrated.     

The interplay of catechol ligands with nanoparticulate iron oxides

The unique properties exhibited by nanoscale materials, coupled with the multitude of chemical surface derivatisation possibilities, enable the rational design of multifunctional nanoscopic devices. Such functional devices offer exciting new opportunities in medical research and much effort is currently invested in the area of "nanomedicine", including: multimodal imaging diagnostic tools, platforms for drug delivery and vectorisation, polyvalent, multicomponent vaccines, and composite devices for "theranostics". Here we will review the surface derivatisation of nanoparticulate oxides of iron and iron@iron-oxide core-shells. They are attractive candidates for MRI-active therapeutic platforms, being potentially less toxic than lanthanide-based materials, and amenable to functionalisation with ligands. However successful grafting of groups onto the surface of iron-based nanoparticles, thus adding functionality whilst preserving their inherent properties, is one of the most difficult challenges for creating truly useful nanodevices from them. Functionalised catechol-derived ligands have enjoyed success as agents for the masking of superparamagnetic iron-oxide particles, often so as to render them biocompatible with medium to long-term colloidal stability in the complex chemical environments of biological milieux. In this perspective, the opportunities and limitations of functionalising the surfaces of iron-oxide nanoparticles, using coatings containing a catechol-derived anchor, are analysed and discussed, including recent advances using dopamine-terminated stabilising ligands. If light-driven ligand to metal charge transfer (LMCT) processes, and pH-dependent ligand desorption, leading to nanoparticle degradation under physiologically relevant conditions can be suppressed, colloidal stability of samples can be maintained and toxicity ascribed to degradation products avoided. Modulation of the redox behaviour of iron catecholate systems through the introduction of an electron-withdrawing substituent to the aromatic π-system of the catechol is a promising approach towards achieving these goals.     

Enhanced diastereoselectivity in beta-mannopyranosylation through the use of sterically minimal propargyl ether protecting groups

[reaction: see text] 2-O-Propargyl ethers are shown to be advantageous in the 4,6-O-benzylidene acetal directed beta-mannosylation reaction. The effect is most pronounced when the O3 protecting group is a bulky silyl ether or a glycosidic bond; however, even with a 3-O-benzyl ether, the use of a 2-O-propargyl ether results in a significant increase in diastereoselectivity. The beneficial effect of the propargyl ether is thought to be a combination of its minimal steric bulk, as determined by a measurement of the steric A-value and of its moderately disarming nature, as reflected in the pKa of propargyl alcohol. Conversely, the application of a 3-O-propargyl ether in the benzylidene acetal directed mannosylation has a detrimental effect on stereoselectivity, for which no explanation is at present available. Deprotection is achieved by base-catalyzed isomerization of the propargyl ether group to the corresponding allenyl ether, followed by oxidative cleavage with N-methylmorpholine N-oxide and catalytic osmium tetroxide.     

Synthesis of tryptophans by Lewis acid promoted ring-opening of aziridine-2-carboxylates: optimization of protecting group and Lewis acid

The preparation of tryptophan derivatives through the Lewis acid promoted substitution of aziridine carboxylates with indole was found to be accompanied by a ring-expansion reaction to generate an oxazolidinone byproduct. The ratio of tryptophan to oxazolidinone products can be optimized through a judicious choice of Lewis acid and N-protecting group.     

Cu2+ Coordination of Covalently Cross-linked β-Amyloid Dimers

Alzheimer’s disease (AD) is a neurodegenerative disorder characterized by deposition of extracellular amyloid plaques comprised from fibrillar aggregates of the amyloid-β peptide (Aβ). Cu²⁺ interactions with Aβ appear to be involved in both the production of reactive oxygen species and the misfolding of Aβ into oligomeric intermediates including covalently cross-linked dimers. We have previously investigated the Cu²⁺ coordination of Aβ monomers in detail, whilst others have shown that Aβ fibrils coordinate Cu²⁺ in a similar manner to Aβ monomers. However, the coordination of low-molecular-weight Aβ species, which are believed to be responsible for neuronal dysfunction in AD, has not been widely investigated. Here, we report the first study of Cu²⁺ coordination by synthetic Aβ dimers containing an artificial diaminopimelic acid (DAP) or a dityrosine cross-link at residue 10. Our preliminary findings show that dityrosine cross-linking imparts unique structural constraints, resulting in Cu²⁺ coordination distinct from Aβ monomers and fibrils, which may be relevant to the greater toxicity of low-molecular-weight Aβ oligomers in AD.     

DEA-based predictors for estimating fleet size changes when modelling the introduction of rights-based management

The introduction of individual transferable quotas (ITQs) into a fishery is going to change not only the amount of catch a fleet can take, but often also changes the fleet structure, particularly if total allowable catches are decreased. This can have an impact on the economic, social and environmental outcomes of fisheries management. Management Strategy Evaluation (MSE) modelling approaches are recognised as the most appropriate method for assessing impacts of management, but these require information as to how fleets may change under different management systems. In this study, we test the applicability of data envelopment analysis (DEA) based performance measures as predictors of how a fishing fleet might change under the introduction of ITQs and also at different levels of quota. In particular, we test the assumption that technical efficiency and capacity utilisation are suitable predictors of which boats are likely to exit the fishery. We also consider scale efficiency as an alternative predictor. We apply the analysis to the Torres Strait tropical rock lobster fishery that is transitioning to an ITQ-based management system for one sector of the fishery. The results indicate that capacity utilisation, technical efficiency and scale efficiency are reasonable indicators of who may remain in the fishery post ITQs. We find that the use of these measures to estimate the impacts of lower quota levels provides consistent fleet size estimates at the aggregate level, but which individual vessels are predicted to exit is dependent on the measure used.