高比例氢气对受限空间旋流钝体火焰结构的影响

氢是非常有潜力的清洁能源载体,富氢燃料燃烧是降低碳排放的可行方式.燃料掺氢会使火焰结构发生明显改变,进而会影响燃烧过程的排放特性与稳定性.然而,氢气掺混对旋流钝体火焰结构影响机理还不甚明确,高掺氢比下火焰结构特征的研究尚且不足.本文基于预混CH4/H2旋流钝体火焰,对宽广掺氢比范围内(0％～80％)的火焰多场信息进行了...     

冲击载荷下分支交错层状仿生复合材料动态断裂行为的实验研究和数值模拟

通过三点弯动态冲击实验和数值模拟方法,研究了分支交错层状仿生复合材料的动态断裂韧性。首先设计并制备了分支交错层状仿贝壳复合材料试样,即将一种脆性刚性材料和一种橡胶类材料分别作为复合材料的硬质层和软胶层;随后采用改进的分离式Hopkinson压杆装置进行了三点弯冲击实验;接着讨论了初始冲击速度、硬质材料长宽比、软质材料层厚度对复合材料试样动态断裂行为的影响;最后采用ABAQUS有限元数值模拟,研究了不同宽度和不同冲击方向对复合材料试样动态断裂韧性和裂纹扩展的影响。结果表明:随着冲击速度和硬质材料长宽比增加、软胶层厚度减小,裂纹越倾向于沿直线扩展,反之,裂纹越倾向于绕过硬质材料沿着软胶层呈折线扩展;试样的峰值动载荷和起裂时间也随之增大。有限元模拟结果表明:随着结构总宽度的增大,试样断裂韧性增加,裂纹倾向于绕过硬质材料沿着软胶层扩展;采用实验设计的冲击方向时,试样的断裂韧性高于其他方向。     

锰卟啉/钒取代杂多酸配合物的合成、表征和性能研究

利用碘化四对(4-三甲氨基苯基)锰卟啉与钒取代杂多酸H5 PMo10 V2O40,在水溶液中,室温下反应合成了锰卟啉/钒取代杂多酸配合物,用红外和紫外光谱技术对其结构进行了表征,发现该配合物中包含着金属卟啉的环状结构与杂多酸的笼状结构,并且二者以化学键的形式键合在一起.以该化合物作为催化剂,以过氧化氢水溶液为氧化剂,在温和的条件下研究了锰卟啉/钒杂多酸配合物对苯的羟基化反应的影响,考察了催化剂的催化活性,探讨了催化剂对苯羟基化反应的活性中心.研究结果表明,杂多酸中的钒原子是其主要的催化活性中心,锰卟啉的存在可以有效地提高其催化活性.     

光致折射晶体中高速调制光束传输和放大的理论研究

本文首次对高速调制光束在先致折射晶体中的耦合进行了理论研究,指出利用光致折射晶体中的双光束耦合可以实现高速调制光束的信息转换和放大,并为实验所证实.     

三硼酸锂晶体的多光子散射

本文报道三硼酸锂(LBO)晶体的瞬态前向相干多光子散射,实验表明LBO晶体内部同时发生x~(2)和x~(3)非线性相互作用过程,而未发现光耦合效应,测量了LBO晶体的光栅寿命上限.     

Bonding Interface Imaging and Shear Strength Prediction by Ultrasound

The propagation of a longitudinal ultrasonic wave normally incident upon an adhesively bonded structure is studied. The structure consists of adherend and adhesive layers with finite thickness. Interfaces between adherend and adhesive are regarded as distributed springs. Theoretical and experimental results show that resonant frequencies of the bonded structure vary sensitively with the interface stiffness constants and adhesive thickness, and these interface characteristics are inversed by the simulation annealing (SA) method. Furthermore, the distribution image of interface stiffnesses is compared with the state of fracture interface, and quantitative prediction of shear strength is achieved based on the distribution of interface stiffnesses and adhesive thicknesses by using a back-propagation neutral network. The average relative error of the shear strength from prediction to real value is 10.7%.     

Electric Field Analysis of Space Charge Injection from a Conductive Nano-Filler Electrode

A simulation on the electric field distribution near the electrode is proposed to explain the reason for using nanosized carbon black mixed with ethylene vinyl acetate, as the electrode could lead to more charge injection into the polymer than using a deposited metal electrode. The electrode is simplified to a layer of conductive semi-spheres with fixed size and constant electric potential. By using the finite element method, it is found that both the size of the semi-spheres and the distance between adjacent semi-spheres could dramatically influence the electric field near the surface of the spheres; these are considered to be the two decisive factors for the charge injecting rate at electrodes of various materials.     

用于测量熔合反应的静电偏转板介绍

An electrostatic deflector for separating the fusion evaporation residues from the beam-like products in heavy ion reactions was installed. The evaporation residue separation and identification with the electrostatic deflector setup was tested with the reaction ^32S＋^96Zr at several energies. The fusion evaporation residues and the beam-like particles were well separated after the electrical separation and the experimental fusion cross section obtained from the angular distribution is in good agreement with the calculated value well above the Coulomb barrier. This confirms the reliability of the setup.     

静压下半导体微腔内激子与光子行为的研究

由于腔模与激子对压力的依赖关系不同,所以可以选择不同的压力使激子和光场处于不同的耦合状态,从而实现对耦合的调谐。利用这种办法,我们观测到了代表激子与光场强耦合作用的Rabi分裂。由于在我们现有样品结构中压力对激子本征行为的影响很小,与以前报道的温度、电场等调谐方式相比,这种调谐方法不仅可以有效地调谐半导体微腔内激子与腔模的耦合程度,而且能够保持激子的本征性质在整个调谐过程中基本不变。这有助于研究在强耦合过程中激子极化激元的本征性质。将实验结果与压力下激子与腔模耦合理论进行拟合,得出了正确的Rabi分裂值。     

Study of the THGEM detector with a reflective CsI photocathode

The THGEM detector without and with a CsI has been tested successfully. The optimal parameters of THGEM have been determined from eight samples. The UV photoelectric effect of the CsI photocathode is observed. The changing tendency related to the extraction efficiency (ε_extr) versus the extraction electric field is measured, and several electric fields influencing the anode current are adjusted to adapt to the THGEM detector with a reflective CsI photocathode.