Thermal,mechanical and electroactive shape memory properties of polyurethane (PU)/poly (lactic acid) (PLA)/CNT nanocomposites

Polymer blend nanocomposites based on thermoplastic polyurethane (PU) elastomer, polylactide (PLA) and surface modified carbon nanotubes were prepared via simple melt mixing process and investigated for its mechanical, dynamic mechanical and electroactive shape memory properties. Chemical and structural characterization of the polymer blend nanocomposites were investigated by Fourier Transform infrared (FT-IR) and wide angle X-ray diffraction (WAXD). Loading of the surface modified carbon nanotube in the PU/PLA polymer blends resulted in the significant improvement on the mechanical properties such as tensile strength, when compared to the pure and pristine CNT loaded polymer blends. Dynamic mechanical analysis showed that the glass transition temperature (T_g) of the PU/PLA blend slightly increases on loading of pristine CNT and this effect is more pronounced on loading surface modified CNTs. Thermal and electrical properties of the polymer blend composites increases significantly on loading pristine or surface modified CNTs. Finally, shape memory studies of the PU/PLA/modified CNT composites exhibit a remarkable recoverability of its shape at lower applied dc voltages, when compared to pure or pristine CNT loaded system.     

Working group report: Heavy-ion physics and quark-gluon plasma

This is the report of Heavy Ion Physics and Quark-Gluon Plasma at WHEPP-09 which was part of Working Group-4. Discussion and work on some aspects of quark-gluon plasma believed to have created in heavy-ion collisions and in early Universe are reported.     

Preparation of poly(styrene‐co‐acrylonitrile)‐grafted multiwalled carbon nanotubes via surface‐initiated atom transfer radical polymerization

The in situ grafting‐from approach via atom transfer radical polymerization was successfully applied to polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile grafted onto the convex surfaces of multiwalled carbon nanotubes (MWCNTs) with (2‐hydroxyethyl 2‐bromoisobutyrate) as an initiator. Thermogravimetric analysis showed that effective functionalization was achieved with the grafting approach. The grafted polymers on the MWCNT surface were characterized and confirmed with Fourier transform infrared spectroscopy and nuclear magnetic resonance. Raman and near‐infrared spectroscopy revealed that the grafting of polystyrene, poly(styrene‐co‐acrylonitrile), and polyacrylonitrile slightly affected the side‐wall structures. Field emission scanning electron microscopy showed that the carbon nanotube surface became rough because of the grafting of the polymers. Differential scanning calorimetry results indicated that the polymers grafted onto MWCNTs showed higher glass‐transition temperatures. The polymer‐grafted MWCNTs exhibited relatively good dispersibility in an organic solvent such as tetrahydrofuran. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 460–470, 2007     

Astrophysical S-factors from asymptotic normalization coefficients

S-factors for direct capture reactions can be found at astrophysical energies from asymptotic normalization coefficients which provide the normalization of the tail of the overlap function. For example the overlap for ⁸B → ⁷Be+p defines the S-factor for ⁷Be (p, γ)⁸B. Peripheral transfer reactions offer a technique to determine these asymptotic normalization coefficients. As a test of the technique, the ¹⁶O(³He, d)¹⁷F reaction has been used to determine asymptotic normalization coefficients for transitions to the ground and first excited states of ¹⁷F. The S-factors for ¹⁶O(p, γ)¹⁷F calculated from these ¹⁷F → ¹⁶O+p asymptotic normalization coefficients are found to be in very good agreement with recent measurements. Following the same technique, the ¹⁰B(⁷Be, ⁸B)⁹Be and ¹⁴N(⁷Be, ⁸B)¹³C reactions have been used to measure the asymptotic normalization coefficient for ⁷Be(p, γ)⁸B. This result provides an indirect determination of S ₁₇(0).     

Gas-phase deprotonation of arylalkylamines. A collision-induced dissociation study

The collision-induced dissociation (CID) of deprotonated arylalkylamines of general formula R(1)C(6)H(4)CHR(2)CH(2)NR(3)(2) (where R(1) = H, OH, F or NO(2); R(2) = H or OH; R(3) = H or CH(3)) generated by negative chemical ionization with H(2)O and D(2)O as ionizing reagents, is discussed. The negative chemical ionization mass spectra show that, in the absence of a hydroxy group in the aromatic ring, deprotonation takes place at the benzylic position whereas the proton is lost from the OH group when present. The nitro compound forms only M(-.) ions. The CID spectra of the deprotonated molecules show that fragmentations are strongly dependent on the structural features of the molecules, namely the presence or absence of substituents in the aromatic ring or aliphatic chain. Copyright 1999 John Wiley & Sons, Ltd.     

Isolation of NO(3)(-)-N as 1-phenylazo-2-naphthol (Sudan-1) for measurement of delta(15)N

The conversion of nitrate (NO(3)(-)) to 1-phenylazo-2-naphthol (Sudan-1) has been examined as a method for natural abundance measurement of delta(15)N of NO(3)(-). The reaction results in dilution of NO(3)(-)-N with only one reagent-derived N and the product is readily concentrated from dilute samples by reverse phase chromatography. There is systematic isotopic fractionation during the reaction, but this can be allowed for by analysing known NO(3)(-) standards along with each sample set. Sudan-1 prepared from surface water samples containing approximately 50 &mgr;g NO(3)(-)-N can be analysed by automated continuous flow isotope ratio mass spectrometry with a precision of 0.2 per thousand (one standard deviation) and the accuracy is not affected by interference from other nitrogenous species in the sample or reagents. Copyright 1999 John Wiley & Sons, Ltd.     

Modification of rubber surface by UV surface grafting

Rubber surface is subjected to ultraviolet radiation (UV) in the presence of allylamine and radiation sensitizer benzophenone (BP). Fourier transform infrared spectral studies reveal the presence of allylamine on the surface. The presence of irregular needle shapes on the surface as observed in scanning electron micrographs also confirms the polymerized allylamine on the surface. Allylamine coatings have been further confirmed from atomic force microscopy (AFM) analysis. Thermogravimetric analysis (TGA) reveals that allylamine coating on the rubber surface lowers the thermal degradation rate. The contact angle between the water and rubber surface decreases for the modified rubber surface confirming the surface modification due to UV surface grafting.