Electrochemical determination of minoxidil in different pharmaceutical formulations by flow injection analysis.

The electrochemical behavior and amperometric-FIA quantification of minoxidil at a glassy carbon electrode is described. The procedure is based on electrochemical oxidation at 0.800 V (vs. Ag/AgCl/NaCl(3 M) in a phosphate buffer solution. Minoxidil was determined over the range 1 x 10(-7) - 1 x 10(-4) M. Different analytical parameters and electrode stability were analyzed to obtain the best electrode performance. The optimal conditions were: working potentials, 0.800 V; flow rate, 0.74 mL min(-1); and solution pH 7.0. This system allowed a sampling rate of 120 samples per hour without any pretreatment. The proposed method was used for minoxidil quantification in pharmaceutical preparations with satisfactory results. The accuracy of FIA-amperometric method was established by a comparison with the conventional UV determination technique using a paired t-test indicating the absence of systematic errors.     

Kinetic modelling of cadmium removal from phosphoric acid by non-dispersive solvent extraction

In this work it is reported that the kinetic modelling of the separation of cadmium from phosphoric acid by non-dispersive solvent extraction. Using Cyanex 302 as selective extractant, the extraction step was carried out in a hollow fibre module containing polypropylene fibres, whereas the concentration step required a ceramic module with tubular channels due to the high acidity of the backextraction agent. Application of the methodology previously reported by the authors led to the development of a kinetic model with three design parameters, i.e., equilibrium constant of the extraction reaction (K'_e = 6 × 10³ mol⁻²/l⁻²), membrane mass transport coefficient of the extraction module K_me=8.33×10⁻⁸ m/s) and of the backextraction module (K_ms=3.33×10⁻⁸ m/s), that described satisfactorily the behaviour of the separation-concentration system. Thus, in this work a new application of the non-dispersive solvent extraction technology is presented, characterising at the same time the behaviour and parameters of a new type of contactor, i.e., a tubular ceramic module.     

Fast solid-phase extraction-gas chromatography-mass spectrometry procedure for oil fingerprinting. Application to the Prestige oil spill

A rapid and simple fractionation procedure using solid-phase extraction (SPE) cartridges was developed for an accurate determination of aliphatic and polycyclic aromatic hydrocarbons in petroleum residues and further application in chemical fingerprinting of oil spills by gas chromatography-mass spectrometry (GC-MS). Among the adsorbents evaluated, SiO2/C3-CN exhibited the best selectivity, providing, by elution with n-hexane (4 ml) and n-hexane-CH2Cl2 (1:1) (5 ml), two well-resolved aliphatic and aromatic hydrocarbon fractions, with recoveries of 97 +/- 7.2 and 99.7 +/- 13.9%, respectively. The SPE fractionation procedure was compared with the conventional silica-alumina adsorption chromatography showing similar results but practical advantages in terms of reproducibility, analysis time, solvent reduction and cost. Moreover, is particularly suitable for routine analysis with a high sample throughput. The developed methodology was tested in the characterization of fuel-oil samples collected along the Spanish north-west coast, after the Prestige oil spill accident.     

Kinetic analysis of liquid-phase depolymerization of trioxane from programmed temperature data

A sequential kinetic discrimination of potential kinetic models for non-isothermal linear programmed temperature data on the depolymerization of trioxane in a homogeneous liquid phase has been discussed.The influence of the initial concentration on the kinetic curves has been used as an experimental confirmation of the first-order influence of the concentration on the model.Kinetic analysis at constant temperature and conversion permits separation of the effects of concentration and temperature on the kinetic analysis at different levels of the variables.It is provided via non-isothermal kinetic data on the depolymerization of trioxane that nonisothermal experiment's allow a systematic approach to the kinetic behaviour in a wide range of the variables temperature and concentration, leading to maximum knowledge of the reaction model through minimum experimental effort.

---

Zusammenfassung Eine sequentielle kinetische Unterscheidung potentieller kinetischer Modelle für die nicht-isotherme, linear temperaturprogrammierte Depolymerisation von Trioxan in homogener flüssiger Phase wird diskutiert. Der Einfluß der Ausgangskonzentration auf die kinetischen Kurven wurde als experimentelle Bestätigung dafür angesehen, daß die Konzentration auf das Modell nach erster Ordnung einwirkt. Die kinetische Analyse bei konstanter Temperatur und Konversion ermöglicht eine Trennung des Einflusses der Konzentration und Temperatur auf die kinetische Analyse bei unterschiedlichen Werten dieser Variablen. In der vorliegenden Arbeit wurde anhand von nichtisothermen kinetischen Daten für die Depolymerisation von Trioxan gezeigt, daß nicht-isotherme Experimente eine systematische Näherung an das kinetische Verhalten in einem weiten Bereich der Variablen Temperatur und Konzentration erlauben und zu einen Maximum an Erkenntnissen über das Reaktionsmodell bei einem Minimum an experimentellen Aufwand führen.

---

- - . . . , , , .

     

Covalent labeling of a chromatin reader domain using proximity-reactive cyclic peptides

Chemical probes for chromatin reader proteins are valuable tools for investigating epigenetic regulatory mechanisms and evaluating whether the target of interest holds therapeutic potential. Developing potent inhibitors for the plant homeodomain (PHD) family of methylation readers remains a difficult task due to the charged, shallow and extended nature of the histone binding site that precludes effective engagement of conventional small molecules. Herein, we describe the development of novel proximity-reactive cyclopeptide inhibitors for PHD3—a trimethyllysine reader domain of histone demethylase KDM5A. Guided by the PHD3–histone co-crystal structure, we designed a sidechain-to-sidechain linking strategy to improve peptide proteolytic stability whilst maintaining binding affinity. We have developed an operationally simple solid-phase macrocyclization pathway, capitalizing on the inherent reactivity of the dimethyllysine ε-amino group to generate scaffolds bearing charged tetraalkylammonium functionalities that effectively engage the shallow aromatic ‘groove’ of PHD3. Leveraging a surface-exposed lysine residue on PHD3 adjacent to the ligand binding site, cyclic peptides were rendered covalent through installation of an arylsulfonyl fluoride warhead. The resulting lysine-reactive cyclic peptides demonstrated rapid and efficient labeling of the PHD3 domain in HEK293T lysates, showcasing the feasibility of employing proximity-induced reactivity for covalent labeling of this challenging family of reader domains.

We describe the development of covalent cyclic peptide ligands which target a chromatin methylation reader domain using a proximity-reactive sulfonyl fluoride moiety.     

Directed ortho-lithiation of unprotected diphenylphosphinic acids

Directed ortho lithiation of diphenylphosphinic acid and subsequent electrophilic trapping provides mono ortho-functionalized derivatives including enantiopure γ-aminophosphinic acids in moderate yields. Copper catalyzed coupling of the ortho anion leads to biphenyl-2,2′-diylbis(phenylphosphinic acid), a phosphorus analogue of biphenyl-2,2′-dicarboxylic acid. Preliminary studies of the metal-binding abilities of this O,O-chelating ligand towards a series of metal cations are included.     

A line-broadening analysis model for the microstructural characterization of nanocrystalline materials from asymmetric x-ray diffraction peaks

Nanograin sizes and crystal lattice microstrains in nanocrystalline materials are typically evaluated from the broadening of their x-ray diffraction (XRD) peaks under the assumption of symmetrical diffraction profiles. Since this assumption is not entirely satisfactory, we formulate a line-broadening analysis model of a single peak that considers explicitly the XRD peak asymmetry. The model is a generalization of the variance method in which the shape of the XRD peaks is idealized through asymmetrical split pseudo-Voigt functions. The model is validated on two nanocrystalline powders.     

Strain-induced polarization rotation in epitaxial (001) BiFeO3 thin films

Direct measurement of the remanent polarization of high quality (001)-oriented epitaxial BiFeO3 thin films shows a strong strain dependence, even larger than conventional (001)-oriented PbTiO3 films. Thermodynamic analysis reveals that a strain-induced polarization rotation mechanism is responsible for the large change in the out-of-plane polarization of (001) BiFeO3 with biaxial strain while the spontaneous polarization itself remains almost constant.