Advantages of using gold hollow nanoshells in cancer photothermal therapy

Lots of studies have been conducted on the optical properties of gold nanoparticles in the first region of near infrared(650 nm–950 nm), however new findings show that the second region of near-infrared(1000 nm–1350 nm) penetrates to the deeper tissues of the human body. Therefore, using the above-mentioned region in photo-thermal therapy(PTT) of cancer will be more appropriate. In this paper, absorption efficiency is calculated for gold spherical and rod-shaped nanoshells by the finite element method(FEM). The results show that the surface plasmon frequency of these nanostructures is highly dependent on the dimension and thickness of shell and it can be adjusted to the second region of near-infrared. Thus, due to their optical tunability and their high absorption efficiency the hollow nanoshells are the most appropriate options for eradicating cancer tissues.     

Simultaneous spectrophotometric determination of uranium and zirconium using cloud point extraction and multivariate methods

A cloud point extraction (CPE) process using the nonionic surfactant Triton X-114 to simultaneous extraction and spectrophotometric determination of uranium and zirconium from aqueous solution using partial least squares (PLS) regression is investigated. The method is based on the complexation reaction of these cations with Alizarin Red S (ARS) and subsequent micelle-mediated extraction of products. The chemical parameters affecting the separation phase and detection process were studied and optimized. Under the optimum experimental conditions (i.e. pH 5.2, Triton X-114?=?0.20%, equilibrium time 10?min and cloud point 45?°C), calibration graphs were linear in the range of 0.01?C3?mg?L^?1 with detection limits of 2.0 and 0.80???g L^?1 for U and Zr, respectively. The experimental calibration set was composed of 16 sample solutions using an orthogonal design for two component mixtures. The root mean square error of predictions (RMSEPs) for U and Zr were 0.0907 and 0.1117, respectively. The interference effect of some anions and cations was also tested. The method was applied to the simultaneous determination of U and Zr in water samples.     

Variation of electrochemical capacitor performance with Room Temperature Ionic Liquid electrolyte viscosity and ion size

The use of Room Temperature Ionic Liquid (RTIL) electrolytes promises to improve the energy density of Electrochemical Capacitors (ECs) by allowing for operation at higher voltages. RTIL electrolytes 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF(4)), 1-ethyl-3-methylimidazolium dicyanamide (EMImN(CN)(2)), 1,2-dimethyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide (DMPImTFSI), and 1-butyl-3-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate (BMPyFAP) were studied. Tetraethylammonium tetrafluoroborate 1 molar solution in anhydrous propylene carbonate (Et(4)NBF(4)-PC 1M) was studied for comparison purposes. Carbon was produced from phenolic resin activated in CO(2). The porosity of the carbon samples were characterised by N(2) adsorption-desorption at 77 K and the relevant electrochemical behaviour was characterised by galvanostatic charge-discharge, electrochemical impedance spectroscopy and cyclic voltammetry. The highest operating voltage of 3.5 V was obtained for BMPyFAP, whilst the best capacitive performance was obtained for EMImBF(4). The maximum energy density increased to 70 Wh kg(-1) (carbon) for RTIL EMImBF(4) from 35 Wh kg(-1)(carbon) for the organic electrolyte Et(4)NBF(4)-PC 1M. It was found that the performance of the RTIL electrolytes could be related to the IL viscosity and ion size whilst the electrolyte equivalent series resistances produced a linear relationship with viscosity. It was found that the capacitance performance of the RTIL electrolytes followed the order EMImBF(4) > DMPImTFSI > BMPyFAP > EMImN(CN)(2). The electrolyte and equivalent series resistance were in the order EMImN(CN)(2) < EMImBF(4) < DMPImTFSI < BMPyFAP.     

Microfluidic synthesis of chitosan-based nanoparticles for fuel cell applications

A microfluidic platform is developed for the synthesis of monodisperse, 100 nm, chitosan based nanoparticles using nanogelation with ATP. The resulting nanoparticles tuned and enhanced transport and electrochemical properties of Nafion based nanocomposite membranes, which is highly favorable for fuel cell applications.     

The fast peroxyoxalate-chemiluminescence of 3-1-aza-4,10-dithia-7-oxacyclododecane as a novel fluorophore

Due to their multiple selectivities, high sensitivity, and instrumental simplicity peroxyoxalate chemiluminescence (PO-CL) reactions have been used as powerful detection systems in several separation techniques. However many of the PO-CL reactions have slow kinetics and impose extra flow elements in separation systems to obtain acceptable band resolution, overcome the peak broadening and observe the reaction in a reasonable time window at maximum emission intensity. Therefore slow chemiluminescence reactions cannot be used in constructing miniaturized separation systems. To achieve the fast and intense PO-CL reactions (suitable for miniaturized separation systems) careful selection of the fluorophore molecule and the reaction conditions is of great importance. In this work, the time-dependent light emission of the fast chemiluminescence (CL) arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with H₂O₂ in the presence of 3-1-aza-4,10-dithia-7-oxacyclododecane (L) as a novel fluorophore, and imidazole as catalyst, has been studied in ethyl acetate solution. To find the best time-intensity emission curves the concentration of TCPO, imidazole, hydrogen peroxide and L were optimized. The maximum CL intensity and minimum reaction time were obtained at the concentration of 0.2 M H₂O₂, 2.0×10^?3 M TCPO, 1.0×10^?3 M fluorophore and 5.0×10^?3 imidazole. Under the optimum experimental condition, the entire CL reaction is completed in less than 3 s.     

Numerical study of random lasing in three dimensional amplifying disordered media

In this paper, the lasing action in three-dimensional active random systems has been numerically investigated. Here, random systems of spherical dielectric particles imbedded in an active medium are considered. The quasi steady state approximation for the population inversion of the active medium is applied to solve three dimensional governing equations. Results show that when the density of particles increases to an upper limit, the intensity of lasing modes is enhanced. Also, the effects of pumping rate and particle size on the number of lasing modes and their intensity are studied. Lasing threshold of laser modes in different disordered systems is calculated and it is shown that by an appropriate selection of the central frequency of gain line-shape, the output power intensity of random lasers increases. These results are in agreement with the experimental results observed by others.     

K2CO3/H2O in [omim][BF4] Ionic Liquid: A Green Medium for Efficient Room‐Temperature Synthesis of N‐Substituted 1,4‐Benzoxazin‐3‐ones

A medium consisting of K₂CO₃ and H₂O in [omim][BF₄] ionic liquid (IL) was used to synthesize N‐substituted 2H‐benzo[b][1,4]oxazin‐3(4H)‐one derivatives from their corresponding o‐aminophenols and 2‐bromoalkanoates. As a result, chemoselective formation of benzoxazinones in high yields has been observed at room temperature. After the reactions and separation of the products, the IL was recovered and successfully reused in subsequent reactions without significant loss of activity.     

A Novel Method for the Synthesis of Spiro[indoline‐Pyrazolo[4′,3′:5,6]pyrido[2,3‐d]pyrimidine]triones by Alum as a Reusable Catalyst

Synthesis of spiro[indoline‐pyrazolo[4′,3′:5,6]pyrido[2,3‐d]pyrimidine]trione derivatives by a cyclo‐condensation reaction of indolin‐2‐ones, barbituric acids, and 1,3‐diphenyl‐1H‐pyrazol‐5‐amines with the ionic liquid as an effective green reaction media and in the presence of Alum as a reusable catalyst was reported. Excellent yields of products, green media, use of a reusable catalyst, and short reaction time are the main advantages of this new method.     

A Novel Hydrogen Peroxide Sensor Based on the Direct Electron Transfer of Catalase Immobilized on Nano‐Sized NiO/MWCNTs Composite Film

MWCNTs‐nanoNiO composite was used as a glassy carbon electrode modifier for construction of a novel catalase nanobiosensor for hydrogen peroxide. The immobilized catalase exhibited excellent electrocatalytic activity towards the reduction of H₂O₂. The resulting amperometric biosensor exhibited a linear response over a concentration range of 200 µM to 2.53 mM with a low detection limit of 19.0 µM. Electrochemical impedance measurements revealed that the modified electrode can be used for the sensitive detection of H₂O₂. The charge transfer resistance found to decrease significantly after enzymatic reaction of nanobiosensor with H₂O₂. The resulting impedance was highly sensitive to H₂O₂ over a linear range of 19–170 nM with a detection limit of 2.4 nM.     

Affinity of two novel five-coordinated anticancer Pt(II) complexes to human and bovine serum albumins: a spectroscopic approach

The interactions of two organoplatinum complexes, [Pt(C^N)Cl(dppa)], 1, and [Pt(C^N)Cl(dppm)], 2 (C^N = N(1), C(2')-chelated, deprotonated 2-phenylpyridine, dppa = bis(diphenylphosphino)amine, dppm = bis(diphenylphosphino)methane), as antitumor agents, with bovine serum albumin (BSA) and human serum albumin (HSA) have been studied by fluorescence and UV-vis absorption spectroscopic techniques at pH 7.40. The quenching constants and binding parameters (binding constants and number of binding sites) were determined by fluorescence quenching method. The obtained results revealed that there is a strong binding interaction between the ligands and proteins. The calculated thermodynamic parameters (ΔG, ΔH, and ΔS) confirmed that the binding reaction is mainly entropy-driven, and hydrophobic forces played a major role in the reaction. The displacement experiment shows that these Pt complexes can bind to the subdomain IIA (site I) of albumin. Moreover, synchronous fluorescence spectroscopy studies revealed some changes in the local polarity around the tryptophan residues. Finally, the distance, r, between donor (serum albumin) and acceptor (Pt complexes) was obtained according to F?rster theory of nonradiation energy transfer.