Cobalt Determination by Means of Flow Injection On-line Sorbent Preconcentration-Flame Atomic Absorption Spectrometry with 1-Nitroso-2-naphthol as a Complexing Reagent

The suitability of 1-nitroso-2-naphthol(NN) as a complexing agent for on-line preconcentration of cobalt eluted on the C_(18) microcolumn by means of the FI-FAAS system was tested. Various parameters affecting the complex formation and its elution were optimized. A 2.3×10~(-3) mol/L reagent solution and the aqueous sample solution acidified with 0.1％ (volume fraction) nitric acid were on-line mixed (6.4 mL/min) on a reaction coil set at (65±1)℃ and flowed through the microcolumn for 30 s. The pH of the mixed solution was adjusted to 3—4 with HNO_3(1 mol/L) or NaOH(1 mol/L). The adsorbed complexes in the microcolumn were eluted into the nebulizer of FAAS in 10 s with ethanol acidified with 1％ HNO_3(3.0 mL/min). A good precision(1.6％ for 100μg/L Co(Ⅱ), n=10), a high enrichment factor 17.2, with detection limit (3σ) 3.2μg/L, and sample throughput (90 h~(-1)) were obtained. The method was applied to the certified reference materials(CRMs), NBS-362 and NBS-364, for the determination of cobalt and the results were in good agreement with the certified values.     

Periodic Mesoporous Organosilica Nanoparticles for CO2 Adsorption at Standard Temperature and Pressure

(1) Background: Due to human activities, greenhouse gas (GHG) concentrations in the atmosphere are constantly rising, causing the greenhouse effect. Among GHGs, carbon dioxide (CO₂) is responsible for about two-thirds of the total energy imbalance which is the origin of the increase in the Earth’s temperature. (2) Methods: In this field, we describe the development of periodic mesoporous organosilica nanoparticles (PMO NPs) used to capture and store CO₂ present in the atmosphere. Several types of PMO NP (bis(triethoxysilyl)ethane (BTEE) as matrix, co-condensed with trialkoxysilylated aminopyridine (py) and trialkoxysilylated bipyridine (Etbipy and iPrbipy)) were synthesized by means of the sol-gel procedure, then characterized with different techniques (DLS, TEM, FTIR, BET). A systematic evaluation of CO₂ adsorption was carried out at 298 K and 273 K, at low pressure. (3) Results: The best values of CO₂ adsorption were obtained with 6% bipyridine: 1.045 mmol·g⁻¹ at 298 K and 2.26 mmol·g⁻¹ at 273 K. (4) Conclusions: The synthetized BTEE/aminopyridine or bipyridine PMO NPs showed significant results and could be promising for carbon capture and storage (CCS) application.     

Synthesis and characterization of biodegradable multicomponent amphiphilic conetworks with tunable swelling through combination of ring‐opening polymerization and “click” chemistry method as a controlled release formulation for 2,4‐dichlorophenoxyacetic acid herbicide

Multicomponent (two, three, and four component) amphiphilic conetworks (APCNs) with tunable swelling behaviors were fabricated through the ring opening polymerization and click chemistry utilizing various combinations of azide and alkyne functionalized poly (ethylene glycol) (PEG) and poly (caprolactone) (PCL) precursors. Prepare azido‐terminated star‐shaped PCL, azido‐terminated PEG, alkyne‐terminated PEG, and propargylated pentaerythritol were characterized by hydrogen‐1 proton nuclear magnetic resonance (¹H NMR) and Fourier‐transform infrared (FT‐IR) spectroscopy. The morphology and thermal behavior of the APCNs were studied by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). The swelling behavior of APCNs could be manipulated through an establishment of a balance between hydrophilic segments, hydrophobic segments, and cross‐linking density. The 2,4‐dichlorophenoxyacetic acid (2,4‐D) herbicide was entrapped in APCNs as a model agrochemical to study the release profile from APCNs. The obtained results showed that the release of 2,4‐D could be controlled by the swelling degree of APCNs. Finally, the biodegradability rates of APCNs were investigated in agricultural soil. The results exhibited that the decrease in the swelling degree led to decreased degradation rate of APCNs. According to obtained results, these APCNs could be used as biomaterials for the controlled release of agrochemicals.     

Baryon-Baryon correlations at small relative momentum in Neon- and Argon-nucleus collisions betweenE/A=200 and 1000 MeV

Two-proton correlation functions at small relative momentum have been systematically studied with the large solid angle detector DIOGENE at Saturne for interactions induced by Ne and Ar beams on various targets, and incident energies per nucleon ranging from 200 to 1000 MeV. From these distributions, informations on the space-time structure of the source have been derived as a function of the centrality of the collision, the target-projectile combinations and the incident energy, using the model of Koonin. Special attention has been devoted to take into account all experimental biases in order to get the distorted theoretical correlation curves before comparison to the experimental data. Other interesting conclusions have been obtained when comparing the extracted source radii to the dimensions of the overlapping volume of target by projectile in a pure geometrical model of the collision (clean cut geometry). Some results concerning fragment-fragment small angle correlations are also presented.     

Optimization of Linac-based neutron source for thermal neutron activation analysis

Journal of Radioanalytical and Nuclear Chemistry - A 20 MeV electron Linac based neutron beam has been shaped for neutron activation analysis (NAA) technique. A beam shaping assembly (BSA)...     

A new flavonoid and sulphur-containing amides from Glycosmis chlorosperma

A new flavonoid, dihydroglychalcone-A, was isolated from the leaves extract of Glycosmis chlorosperma in addition to two known sulphur-containing amides, dambullin and gerambullin. The structure of the new compound was assigned as 2'-hydroxy-4,6'-dimethoxy-3',4'-(2",2"-dimethylpyrano)dihydrochalcone. The extract of the leaves was also found to exhibit antimicrobial and cytotoxic activities.     

Electrolytically produced copper(I) chloride on the copper wire as an excellent sorbent for some amines

A new solid-phase microextraction (SPME) fiber has been developed and applied for the determination of some amines (n-pentylamine, tripropylamine, dibutylamine, diisobutylamine and tributylamine). In this study two copper wires were immersed in sodium chloride solution and electrolysis was performed at a constant potential. Anode was oxidized to copper(I) to produce copper(I) chloride as a sorbent for the studied amines on the copper wire. Several parameters affecting the fiber preparation and SPME procedure such as electrolysis time, selection of the SPME coating, extraction time and temperature were optimized. The copper(I) chloride fiber was the most appropriate one for the determination of amines by SPME-GC-FID. The optimized method was linear over the range studied (1-100 μg L⁻¹) and showed good precision, with R.S.D values less than 3% for all analytes. Fiber production was reproducible and R.S.D for fiber-to-fiber was less than 8%. The proposed SPME-GC method showed some advantages such as lower detection limits, a shorter analysis time and the avoidance of expensive commercial fibers.     

A New Turbidimetric Method for Determination of Melamine Based on its Reaction with Mercury(II)

A turbidimetric technique based on a reaction between Hg(II) and melamine is described for the measurement of melamine content of wastewater of a petrochemical company. The present technique is rapid and simple, uses a small amount of reagent and is set up with low‐cost equipment, making this system economically viable. The experimental conditions such as volume of reagent, pH of buffer, stirring time, stirring speed, ionic strength, etc. were optimized and used in plotting the calibration curve. The linear dynamic range was 1–70 mg/L with a limit of detection of 0.3 mg/L. Repeatability of the proposed method is good, and the relative standard deviation (RSD%) is less than 1.5%. Interferences studies showed that the common compounds existing in wastewater have no negative effect on the efficiency of the method at relatively high concentrations. Finally, the proposed method has been successfully used in determination of melamine in wastewater of Urmia Petrochemical Company.     

Modeling of the nonlinear vibrations of a stiffened moderately thick plate

We consider a multi-structure consisting of a plate reinforced by a thin stiffener on a portion of its boundary. The model we consider for this structure (viewed as a heterogeneous plate) is nonlinear and takes into account the transverse shear effects. Our aim is to model this junction and reproduce the effect of the thin stiffener by means of approximate boundary conditions on the junction region.