Thermal characterization of bismaleimide blends

4,4-bismaleimidophenyl methane (BM) and 3,3-bismaleimidophenyl sulfone (BS) were blended in solution using weight ratios 31 (MS31), 21 (MS21), 11 (MS11), 12 (MS12) and 13 (MS13). Chain extended bismaleimide resins were also prepared by treating BS/BM with 4,4-diaminodiphenyl ether in molar ratios of 10.3 (BM-E and BS-E resins). These resins were also blended with bismaleimides and the curing characteristics were evaluated by differential scanning calorimetry. Increase in BM content in BMBS blends or increase in chain extended bismaleimide content in BM-EBS or BS-E BM blends resulted in a reduction of melting and curing temperatures. Indication about the extent of cross-linking was obtained from solubility measurements (in DMF) of isothermally cured resins (180 °C, lh and 220 °C, lh in an air oven). Thermogravimetric analysis of samples isothermally cured at 180 °C and 220 °C (lh each) was carried out in nitrogen atmosphere. Improvement in thermal stability of chain extended bismaleimides was observed on blending.

---

Zusammenfassung 4,4-Bismalimidophenyl-methan (BM) und 3,3-Bismalimidophenyl-sulfon (BS) wurden in Lösung in den Gewichtsverhältnissen 31 (MS31), 21 (MS21), 11 (MS11), 12 (MS12) und 13 (MS13) gemischt. Auch kettenpolymerisierten Bismalimid-Harze wurden durch Behandlung von BS/BM mit Diaminodiphenylether im Molverhältnis 10,3 dargestellt (BM-E- und BS-E-Harze). Die Kennwerte der Aushärtung von Mischungen dieser Harze mit den Bismalimiden wurden mittels DSC ermittelt. Eine Erhöhung des BM-Gehaltes in den BM BS-Mischungen oder des Gehaltes der BM-E BS oder BS-E-Mischungen an kettenpolymerisierten Bismalimiden führt zu einer Erniedrigung der Schmelz- und Aushärtetemperaturen. Hinweise über den Vernetzungsgrad wurden aus Löslichkeitsmessungen (in DMF) von Isotherm (je 1 Stunde bei 180 und 220 °C in Luft) gehärteten Harzen erhalten. Die thermogravimetrische Analyse der Isotherm bei 180 bzw. 220 °C 1 Stunde ausgehärteten Proben wurde in Stickstoffatmosphäre ausgeführt. Die thermische Stabilität der Bismalimide wird durch Verschneiden verbessert.

---

4,4-- () 3,3-- () 31 (MC 31), 21 (MC 21), 11 (MC 11), 12 (MC 12) 13 (MC13). - / 4,4- 10,3 ( - C-). - . - - - - , . ( 1 180 220°) . . - .

---

---

The financial assistance provided by Department of Science and Technology is gratefully acknowledged.     

Microdetermination of carbonyl compounds by reduction with alkaline sodium borohydride

Summary Alkaline sodium borohydride has been employed as a reducing reagent for the titrimetric determination of compounds containing the carbonyl function. The sample is dissolved in methanol and is then reduced with alkaline sodium borohydride. After completion of the reaction, the excess sodium borohydride is back titrated against standardized hydrochloric acid solution using methyl red as indicator. The stoichiometry between the carbonyl function and sodium borohydride is 41.

---

Zusammenfassung Natriumborhydrid dient als Reduktionsmittel zur Titration von Carbonylverbindungen. Die Probe wird in Methanol gelöst und dann mit alkalischem Natriumborhydrid reduziert. Nach Ablauf der Reaktion wird der Überschuß mit Salzsäure gegen Methylrot zurücktitriert. Carbonylverbindung und Natriumborhydrid reagieren im Verhältnis 41.

     

Phytocannabinoid Compositions from Cannabis Act Synergistically with PARP1 Inhibitor against Ovarian Cancer Cells In Vitro and Affect the Wnt Signaling Pathway

Ovarian cancer (OC) is the single most lethal gynecologic malignancy. Cannabis sativa is used to treat various medical conditions, and is cytotoxic to a variety of cancer types. We sought to examine the effectiveness of different combinations of cannabis compounds against OC. Cytotoxic activity was determined by XTT assay on HTB75 and HTB161 cell lines. Apoptosis was determined by flow cytometry. Gene expression was determined by quantitative PCR and protein localization by confocal microscopy. The two most active fractions, F5 and F7, from a high Δ9–tetrahydrocannabinol (THC) cannabis strain extract, and their standard mix (SM), showed cytotoxic activity against OC cells and induced cell apoptosis. The most effective phytocannabinoid combination was THC+cannabichromene (CBC)+cannabigerol (CBG). These fractions acted in synergy with niraparib, a PARP inhibitor, and were ~50-fold more cytotoxic to OC cells than to normal keratinocytes. The F7 and/or niraparib treatments altered Wnt pathway-related gene expression, epithelial–mesenchymal transition (EMT) phenotype and β-catenin cellular localization. The niraparib+F7 treatment was also effective on an OC patient’s cells. Given the fact that combinations of cannabis compounds and niraparib act in synergy and alter the Wnt signaling pathway, these phytocannabinoids should be examined as effective OC treatments in further pre-clinical studies and clinical trials.     

Lysinated Multiwalled Carbon Nanotubes with Carbohydrate Ligands as an Effective Nanocarrier for Targeted Doxorubicin Delivery to Breast Cancer Cells

Multiwalled carbon nanotubes (MWCNTs) are elongated, hollow cylindrical nanotubes made of sp2 carbon. MWCNTs have attracted significant attention in the area of drug delivery due to their high drug-loading capacity and large surface area. Furthermore, they can be linked to bioactive ligands molecules via covalent and noncovalent bonds that allow for the targeted delivery of anticancer drugs such as doxorubicin. The majority of methodologies reported for the functionalization of MWCNTs for drug delivery are quite complex and use expensive linkers and ligands. In the present study, we report a simple, cost-effective approach for functionalizing MWCNTs with the carbohydrate ligands, galactose (GA), mannose (MA) and lactose (LA), using lysine as a linker. The doxorubicin (Dox)-loaded functionalized MWCNTs were characterized using FT-IR, NMR, Raman, XRD and FE-SEM. The drug–loaded MWCNTs were evaluated for drug loading, drug release and cell toxicity in vitro, in breast cancer cells. The results indicated that the carbohydrate-modified lysinated MWCNTs had greater Dox loading capacity, compared to carboxylated MWCNTs (COOHMWCNTs) and lysinated MWCNTs (LyMWCNTs). In vitro drug release experiments indicated that the carbohydrate functionalized LyMWCNTs had higher Dox release at pH 5.0, compared to the physiological pH of 7.4, over 120 h, indicating that they are suitable candidates for targeting the tumor microenvironment as a result of their sustained release profile of Dox. Doxorubicin-loaded galactosylated MWCNTs (Dox-GAMWCNTs) and doxorubicin loaded mannosylated MWCNTs (Dox-MAMWCNTs) had greater anticancer efficacy and cellular uptake, compared to doxorubicin–loaded lactosylated MWCNTs (Dox-LAMWCNTs) and pure Dox, in MDA-MB231 and MCF7 breast cancer cells. However, neither the ligand conjugated multiwall blank carbon nanotubes (GAMWCNTs, MAMWCNTs and LAMWCNTs) nor the lysinated multiwalled blank carbon nanotubes produced significant toxicity in the normal cells. Our results suggest that sugar-tethered multiwalled carbon nanotubes, especially the galactosylated (Dox-GAMWCNTs) and mannosylated (Dox-MAMWCNTs) formulations, may be used to improve the targeted delivery of anticancer drugs to breast cancer cells.     

Torsionally broken symmetry assists infrared excitation of biomimetic charge-coupled nuclear motions in the electronic ground state

The concerted interplay between reactive nuclear and electronic motions in molecules actuates chemistry. Here, we demonstrate that out-of-plane torsional deformation and vibrational excitation of stretching motions in the electronic ground state modulate the charge-density distribution in a donor-bridge-acceptor molecule in solution. The vibrationally-induced change, visualised by transient absorption spectroscopy with a mid-infrared pump and a visible probe, is mechanistically resolved by ab initio molecular dynamics simulations. Mapping the potential energy landscape attributes the observed charge-coupled coherent nuclear motions to the population of the initial segment of a double-bond isomerization channel, also seen in biological molecules. Our results illustrate the pivotal role of pre-twisted molecular geometries in enhancing the transfer of vibrational energy to specific molecular modes, prior to thermal redistribution. This motivates the search for synthetic strategies towards achieving potentially new infrared-mediated chemistry.

Channelling vibrational excitation energy to achieve ground-state charge-transfer (CT)-assisted isomerization in a donor-bridge-acceptor molecule in solution.     

On the occurrence of polytypism in single crystal CdTe thin films

Cadmium telluride thin films have been found to exhibit polytypism. The polytypes are formed when the as grown amorphous CdTe thin films undergo amorphous to crystalline transformation. The transformed single crystal regions correspond to different polytypes. Besides the well known zinc blende type 3 C cubic phase and less often found wurtzite type 2 H phase, four new polytypes (5 H, 6 H, 6 R and 15 R) the only ones known to-date have been found in the present investigation. In addition to the new polytypes, a new structural variant has also been found. This has the same ‘c’ parameter as that of the 2 H phase but has its ‘a’ lattice parameter as ‘a₀ \documentclass{article}\pagestyle{empty}\begin{document}$ a_{\rm o} \sqrt {3} $\end{document}’ (a₀ being the common lattice parameter of the polytypes). A feasible mechanism making the formation of polytypes intelligible has been suggested.     

Synthesis and bioactivity evaluation of eugenol hybrids obtained by Mannich and 1,3 dipolar cycloaddition reactions

Design, synthesis, and bioactivity evaluation of novel mannich bases ( 2a-2j ) and triazole-chalcone derivatives ( 7a-7k ) of Eugenol 1 were reported. Among all the derivatives tested for antiproliferative activity, di-amine manich derivative 2b (32.92 μM), and 4-methoxy chalcone triazole derivative 7d (33.05 μM) significantly inhibited HepG2 cell lines when compared to the standard doxorubicin (37.29 μM). Whereas most of the compounds such as diethylamine 2a (17.75 μM), (aminomethyl) methane diamine 2b (17.02 μM), and bis (chloromethyl) amine 2c (20.12 μM) showed moderate to better inhibition towards MCF-7 cell lines. The synthesized analogues were also tested for antidiabetic and antiobesity potentials. Compounds 2f (55.50%), 2c (54.34%), 7g (55.5%), and 2a (55.5%) have shown moderate inhibitory potentials toward intestinal α-glucosidase enzyme when compared to the standard Acarbose (72.86%). Likewise, compounds 7d (82.95%), 7f (76.19%), 7g (74.81%), 7e (74.81%), and 2g (72.50%) have shown significant to moderate inhibitory potentials toward Pancreatic lipase enzyme when compared to the standard orlistat (91.10%). ROS induces life-threatening diseases like diabetes, cancer, etc., and antioxidants play a major role in controlling their production. Compounds 2c (99.81%), 2i (99.80%), 2d (99.26%), 2g (98.79%), and 2f (98.42%) have shown significant antioxidant profiles in ABTS assay when compared to the standard Trolox (99.07%). Further, In silico Molecular docking and pharmacokinetic screening of the eugenol derivatives complemented the in vitro results indicating the drug likeness of the obtained active compounds.     

Cu (II) and Co (II/III) complexes of N,O‐chelated Schiff base ligands: DNA interaction,protein binding,cytotoxicity, cell death mechanism and reactive oxygen species generation studies

A series of copper (II) ( 1 and 3 ) and cobalt (II/III) ( 2 , 4 and 5 ) complexes comprising different imino‐phenolate ligands DCH , DTH and DBH ₂ (where DCH = 2,4‐dichloro‐6‐((mesitylimino)methyl)phenol, DTH = 2,4‐di‐tert‐butyl‐6‐((mesitylimino)methyl) phenol and DBH ₂ = 2,4‐dibromo‐6‐((mesitylimino)methyl)phenol) have been prepared with excellent yield and high purity. By utilizing different spectroscopic tools such as UV–visible, electrospray ionization (ESI)‐mass, Fourier‐transform infrared (FTIR) spectrometry and elemental analysis, the prepared complexes ( 1 – 5 ) were thoroughly characterized. The molecular structure of the synthesized complexes was ascertained by using single‐crystal X‐ray diffraction studies (SCXRDs). The experiment reveals that Complexes 1 – 5 bind to calf thymus DNA (CT‐DNA) through non‐intercalative way with good interacting abilities. However, 1 – 5 are excellent quenchers of the fluorescence intensity of bovine serum albumin (BSA) following the static pathway. Additionally, they had shown remarkable cytotoxic potential against MCF‐7 (mammary gland adenocarcinoma) and A549 (lung adenocarcinoma) cell lines. The IC₅₀ values associated with these complexes were much lower than the conventional drug cisplatin. Apoptosis‐induced cell death was confirmed from the DNA fragmentation studies and Hoechst 33342 staining. The 2′,7′‐dichlorofluorescein diacetate (DCFDA) assay indicates that the complex mediated reactive oxygen species (ROS) generation is accountable for governing the apoptosis mechanism via oxidative cell distress. Apart from these studies, by carrying out density functional theory (DFT) method, highest occupied molecular orbital–lowest unoccupied molecular orbital (HOMO–LUMO) energy gap calculations and optimized structures of the synthesized complexes were accomplished.     

Modeling of transient electroluminescence overshoot in bilayer organic light-emitting diodes using rate equations

When a voltage pulse is applied under forward biased condition to a spin-coated bilayer organic light-emitting diode (OLED), then initially the electroluminescence (EL) intensity appearing after a delay time, increases with time and later on it attains a saturation value. At the end of the voltage pulse, the EL intensity decreases with time, attains a minimum intensity and then it again increases with time, attains a peak value and later on it decreases with time. For the OLEDs, in which the lifetime of trapped carriers is less than the decay time of the EL occurring prior to the onset of overshoot, the EL overshoot begins just after the end of voltage pulse. The overshoot in spin-coated bilayer OLEDs is caused by the presence of an interfacial layer of finite thickness between hole and electron transporting layers in which both transport molecules coexist, whereby the interfacial energy barrier impedes both hole and electron passage. When a voltage pulse is applied to a bilayer OLED, positive and negative space charges are established at the opposite faces of the interfacial layer. Subsequently, the charge recombination occurs with the incoming flux of injected carriers of opposite polarity. When the voltage is turned off, the interfacial charges recombine under the action of their mutual electric field. Thus, after switching off the external voltage the electrons stored in the interface next to the anode cell compartment experience an electric field directed from cathode to anode, and therefore, the electrons move towards the cathode, that is, towards the positive space charge, whereby electron–hole recombination gives rise to luminescence. The EL prior to onset of overshoot is caused by the movement of electrons in the electron transporting states, however, the EL in the overshoot region is caused by the movement of detrapped electrons. On the basis of the rate equations for the detrapping and recombination of charge carriers accumulated at the interface expressions are derived for the transient EL intensity I, time t_m and intensity I_m corresponding to the peak of EL overshoot, total EL intensity I_t and decay of the intensity of EL overshoot. In fact, the decay prior to the onset of EL overshoot is the decay of number of electrons moving in the electron transporting states. The ratio I_m/I_s decreases with increasing value of the applied pulse voltage because I_m increases linearly with the amplitude of applied voltage pulse and I_s increases nonlinearly and rapidly with the increasing amplitude of applied voltage pulse. The lifetime τ_t of electrons at the interface decreases with increasing temperature whereby the dependence of τ_t on temperature follows Arrhenius plot. This fact indicates that the detrapping involves thermally-assisted tunneling of electrons. Using the EL overshoot in bilayer OLEDs, the lifetime of the charge carriers at the interface, recombination time of charge carriers, decay time of the EL prior to onset of overshoot, and the time delay between the voltage pulse and onset time of the EL overshoot can be determined. The intense EL overshoot of nanosecond or shorter time duration may be useful in digital communication, and moreover, the EL overshoot gives important information about the processes involving injection, transport and recombination of charge carriers. The criteria for appearance of EL overshoot in bilayer OLEDs are explored. A good agreement is found between the theoretical and experimental results.