An efficient ‘on-water’ synthesis of 1,4-dihydropyridines using Fe3O4@SiO2 nanoparticles as a reusable catalyst

An ‘on-water’, efficient, high yielding, expeditious method has been developed for the synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives via an one-pot multi-component condensation of dimedone or 4-hydroxycoumarine, aldehydes, and ammonium acetate using Fe₃O₄@SiO₂ nanoparticles as a recyclable heterogeneous catalyst. This method takes advantage of the fact that water, a green solvent is used in combination with Fe₃O₄@SiO₂ nanoparticles as catalyst which can be easily recovered magnetically and reused for further runs.     

Development and validation of an LC-ESI-MS/MS method for simultaneous quantitation of olmesartan and pioglitazone in rat plasma and its pharmacokinetic application

A simple, high‐throughput and specific high‐performance liquid chromatography tandem mass spectrometry method has been developed and validated according to the FDA guidelines for simultaneous quantification of olmesartan and pioglitazone in rat plasma. The bioanalytical method consists of liquid–liquid extraction and quantitation by triple quadrupole mass spectrometry using electrospray ionization technique, operating in multiple reaction monitoring and positive ion modes. The compounds were eluted isocratically on a C₁₈ column with a mobile phase consisting of a mixture of methanol and water (containing 0.5% formic acid) in a ratio of 9:1. The response to olmesartan and pioglitazone was linear over the range 0.01–10 µg/mL. The validation results demonstrated that the method had satisfactory precision and accuracy across the calibration range. Intra‐ and inter‐day precisions ranged from 0.66 to 3.32 and from 0.94 to 2.93% (%CV), respectively. The accuracy determined at three quality control levels was within 91.27–107.28%. There was no evidence of instability of the analytes in rat plasma following the stability studies. The method proved highly reproducible and sensitive and was successfully applied in a pharmacokinetic study after single dose oral administration of olmesartan and pioglitazone to the rat. Copyright © 2010 John Wiley & Sons, Ltd.     

Two enantiomers of [Cu(3)(mnt)(3)](3-) as ligands to Cu(i) or Ag(i) in building [Cu(6)M(2)(mnt)(6)](4-) complexes (M = Cu or Ag) with the reversal of the reaction by X(-) (X = Cl, Br)

Two enantiomers of [Bu(4)N](3)[Cu(3)(mnt)(3)] () formed by Na(2)(mnt) (mnt = maleonitriledithiolate, [S(2)C(2)(CN)(2)](2-)) and CuCl in a 1 : 1 molar ratio react further with MCl (M = Cu or Ag) involving both the enantiomers of to produce the larger complex, [Bu(4)N](4)[Cu(6)M(2)(mnt)(6)] (M = Cu (2), Ag (3)) from which the capped Cu(+) or Ag(+) ion can readily be removed by Bu(4)NX (X = Cl, Br), reverting or back to . Such reversal does not work with non-coordinating anions like BF(4)(-), ClO(4)(-) and PF(6)(-).     

Temperature-dependent solvation dynamics of water in sodium bis(2-ethylhexyl)sulfosuccinate/isooctane reverse micelles

In this paper, for the first time, we report a detailed study of the temperature-dependent solvation dynamics of a probe fluorophore, coumarin-500, in AOT/isooctane reverse micelles (RMs) with varying degrees of hydration (w0) of 5, 10, and 20 at four different temperatures, 293, 313, 328, and 343 K. The average solvation time constant becomes faster with the increase in w0 values at a particular temperature. The solvation dynamics of a RM with a fixed w0 value also becomes faster with the increase in temperature. The observed temperature-induced faster solvation dynamics is associated with a transition of bound- to free-type water molecules, and the corresponding activation energy value for the w0 = 5 system has been found to be 3.4 kcal mol-1, whereas for the latter two systems, it is approximately 5 kcal mol-1. Dynamic light scattering measurements indicate an insignificant change in size with temperature for RMs with w0 = 5 and 10, whereas for a w0 = 20 system, the hydrodynamic diameter increases with temperature. Time-resolved fluorescence anisotropy studies reveal a decrease in the rotational restriction on the probe with increasing temperature for all systems. Wobbling-in-cone analysis of the anisotropy data also supports this finding.     

Ni(II) selective sensors based on Schiff bases membranes in poly(vinyl chloride)

The two nickel chelates of Schiff bases, 3-hydroxy-N-{2-[(3-hydroxy-N-phenylbutyrimidoyl)-amino]-phenyl}-N′-phenylbutyramidine (M₁) and bis-4-(ethyliminomethyl)naphthalene-1-ol (M₂), have been synthesized and explored as ionophores for preparing PVC-based membrane sensors selective to nickel ion. The influences of membrane compositions on the potentiometric response of the electrodes have been found to substantially improve the performance characteristics. The best performance was obtained with the electrode having a membrane composition (w/w; mg) of (M₁): PVC:NaTPB:CN in the ratio 5:150:5:150. The sensor shows a linear potential response for Ni²⁺ over a wide concentration range 1.6 × 10⁻⁷ to 1.0 × 10⁻² M with Nernstian compliance (30.0 ± 0.2 mV/decade of activity) within pH range 2.5-9.5 and a fast response time of 10 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol, and acetonitrile and could be used for a period of 4 months. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of nickel in real samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

A light writable microfluidic "flash memory": optically addressed actuator array with latched operation for microfluidic applications

This paper presents a novel optically addressed microactuator array (microfluidic "flash memory") with latched operation. Analogous to the address-data bus mediated memory address protocol in electronics, the microactuator array consists of individual phase-change based actuators addressed by localized heating through focused light patterns (address bus), which can be provided by a modified projector or high power laser pointer. A common pressure manifold (data bus) for the entire array is used to generate large deflections of the phase change actuators in the molten phase. The use of phase change material as the working media enables latched operation of the actuator array. After the initial light "writing" during which the phase is temporarily changed to molten, the actuated status is self-maintained by the solid phase of the actuator without power and pressure inputs. The microfluidic flash memory can be re-configured by a new light illumination pattern and common pressure signal. The proposed approach can achieve actuation of arbitrary units in a large-scale array without the need for complex external equipment such as solenoid valves and electrical modules, which leads to significantly simplified system implementation and compact system size. The proposed work therefore provides a flexible, energy-efficient, and low cost multiplexing solution for microfluidic applications based on physical displacements. As an example, the use of the latched microactuator array as "normally closed" or "normally open" microvalves is demonstrated. The phase-change wax is fully encapsulated and thus immune from contamination issues in fluidic environments.     

Experimental and theoretical study of the reaction between bicyclo[2.2.1]hept-5-en-endo-2-ylmethylamine and 2-[(2-allylphenoxy)methyl]oxirane

In reactions of bicyclo[2.2.1]hept-5-en-endo-2-ylmethylamine with 2-[(2-allylphenoxy)methyl]oxirane alongside the product of amine monoalkylation a compound was obtained and isolated by chromatography on silica gel resulting from the reaction of the monoalkylated substance with the initial epoxide. The structure of new aminoalcohols and the regiochemistry of the oxirane opening were examined using IR, 1H NMR, and mass spectra. The features of the reaction mechanism were considered applying quantum-chemical calculations in the level of theory PCM/B3LYP/6-3aG(d).     

Polyhydroxamic Acid Sorbents for Uranium Recovery

Crosslinked polyacrylamides were synthesized by solution polymerization using benzoyl peroxide as the radical initiator. The water–insoluble polymer obtained was functionalized by reacting with hydroxylamine to convert the amide group into hydroxamic acid group. The resultant functionalized polymer was characterized in terms of moisture uptake, elemental composition, IR spectra, thermal stability, exchange capacity and heavy metal sorption. The sorbent, obtained in particulate form, was investigated for its sorption properties with respect to uranium from uranyl nitrate solutions under unstirred batch conditions. This paper will concentrate on preparation, characterization and performance evaluation with respect to uranium sorption as a function of concentration, time, solution pH and temperature. The potential of this sorbent for uranium and other heavy metal ion recovery from sea water is ascertained.     

Interaction of 3H+ (as HTO) and 36Cl− (as Na36Cl) with crushed granite and corresponding fracture infill material investigated in column experiments

The transport of ³H⁺ (as HTO) and ³⁶Cl^? (as Na³⁶Cl) was investigated in the dynamic system, i.e., in the columns filled with crushed pure granite and fracture infill of various grain sizes. The aim of column experiments was to determine important transport parameter, such as the retardation, respectively distribution coefficients, Peclet numbers and hydrodynamic dispersion coefficients. Furthermore, the research was focused to quantification of the effect of grain size on migration of studied radionuclides. The experimental breakthrough curves were fitted by a model based on the erfc-function, assuming a linear reversible equilibrium sorption/desorption isotherm, and the above mentioned transport parameters were determined. The results showed that influence of grain size on sorption of ³H⁺ and ³⁶Cl^? was negligible. Retardation and distribution coefficients of both tracers converged to one and zero, respectively, in case of all fractions of crushed granite and infill material. Generally, the presumed ion exclusion of ³⁶Cl in anionic form was proved under given conditions, only very weak one seems to exist in a case of infill material. In principal, both radionuclides behaved as non-sorbing, conservative tracers. On the other hand, the influence of grain size on Peclet numbers value and on dispersion coefficient was observed for both crystalline materials, namely in agreement with theoretical suppositions that the values of Peclet numbers decrease with increasing grain size and values of dispersion coefficient increase.